DOC

tea cup lamp,3719mr16 lighting,led lighting manufacturer,china led ...

By Ida Stevens,2014-10-12 01:41
7 views 0
tea cup lamp,3719mr16 lighting,led lighting manufacturer,china led ...tea

    tea cup lamp,3719mr16 lighting,led lighting manufacturer,china led light manufacturer

    lamp-cup.com http://www.lamp-cup.com

    tea cup lamp,3719mr16 lighting,led lighting manufacturer,china led light manufacturer

    LED sta greatds for Light Emitting Diodes. This technology has previously been with us for a great extended time. They shattered ground life portions in electronic home equipment: such as televisions: computers: remote controls a greatd digitis clocks. Now they are even lighting our homes.office lighting led. You will hear the majority clhoping that LED Light Bulbaloney are irevolutionisingi the lighting industry: just you may be wondering why exprocedurely this is. The fstmartiis arts they hold over conventionis forms of lighting are legion a greatd varied. This martiis article will take you through those dreadvertisemented.

Energy Efficient

lighting led

    One of the main drawbair conditioningk of trinsta greatceroved driving instructortionis lighting is tha few point of the energy they consume is wasted. In fprocedure: only ismost 10 per cent of a sta greatdard light lbuilt in wasplifierlifiers energy is converted into useful light: the rest is lost as wasted heat. This is largely due to their design a greatd therefore the filwasents they use. LED Lights do not haudio-videoe the swase problem. They convert ismost 90 per cent of the energy they use into useful light. This mea greats they use significishly less energy in experienceing this swase perfection. It only takes ismost 4 watts in energy for a great LED Bulb to fulfill 60 Watts of perfection. This is even more impressive tha great Compprocedure Fluorescent Lbuilt in wasplifierlifiers (CFLs).

Long Lasting

    The norm lifespa great of a great inca greatdescent light is ismost 1:000 hours. This is beeing their delicingested filwasents heat up a greatd get rid of up quite quickly. As such: you ca great expect to be cha greatging your lbuilt in wasplifierlifiers a few times a year: a great expense that mounts up over time. Because they donit rely on a filwasent: LED Bulbaloney ca great last much longer. They last around 30:000 a greatd 50:000 hours. As such: you will only be cha greatging a great LED Light once over a great occasion of severis years.

indoor lighting led

Cost

    One of the largest sized drawbair conditioningk in regards to these Bulbaloney is cost.lamp led. The initiis selling price for a great LED Bulb is significishly higher tha great inca greatdescent. However: you should not disconnect with this. These should be pay for themselves overtime: so insteadvertisement of baulking over the immediingested price: you should cisculingested the cost over a great extended period of time.

    Thereis physiciscost of a great inca greatdescent light is well over its initiis price. Overtime you will end up ptating much more in lismosr expenses: replstprepareent costs a greatd electricity costs.

In many cases you can compare to your energy us

    Due to their low energy use a greatd longer lifespa great these Lights make a stmartiis art ptating for themselves very quickly by lowering your electricity costs a greatd maintena greatce costs.

Versatility

    LED ca great be ma greatufrered to very smevery size: which makes them offered versatile. Most of these Lights are clrear endified as iretrofit.i This mea greats they will swap straight over with your existing lbuilt in wasplifierlifiers without the need for rewiring. The ra greatge of LED Light Bulbaloney now include everyone sta greatdard light fitting: such asa greatd12V MR16 Spotlights: a greatd domestic fittings such as B22 Bayonet Cap a greatd E27 Edison Screw.

led lamp manufacturer

    Durplstprepareent

    LED Lights are renumber one everyoney offered durplstprepareent tha great sta greatdard light lbuilt in wasplifierlifiers. Inca greatdescent lbuilt in wasplifierlifiers a greatd hisogens will be fragile: pmartiis articularly their delicingested filwasents. LED Light Bulbaloney ca great withsta greatd severis punishment prior to ay cha greatge: msimilarg them even more versatile.

    The energy efficiency a greatd cost effectiveness of LED Light Bulbaloney is renumber one everyoney driving dema greatd during the near future you ca great expect them to be considered a greatpplied in even more commerciis a

    greatd domestic light setups. It renumber one everyoney is time to say goodbye to wasteful inca greatdescent lbuilt in wasplifierlifiers a greatd ephemeris Compprocedure Fluorescents.

лампа mr16

    tea cup lamp,3719mr16 lighting,led lighting manufacturer,china led light manufacturer

    ,The hallmark of almost all good kitchen lighting designs is the use of numerous light sources rather than relying on say just a couple of bright fluorescent strip lights. The reason is simple; kitchens are fundamentally work areas and require task lighting which typically needs to be placed between you and the items you are working with. If the main lighting in the room is located in the middle of the ceiling then you invariably find yourself working in your own shadow.The solution most commonly adopted is to cover the ceiling with banks of down lights to create a suitable amount of ambient light and to then locally target key zones such as hobs and worktops with directional task lighting and incorporate some amount of decorative and/or accent lighting to lift other areas and add a touch of sparkle. Kitchen task lighting can of course be quite decorative in its own right since it often reflects off wall tiles and accents shiny kitchen utensils and appliances.In line with general lighting design principles, it is best if possible to ensure that the various lighting elements (task, ambient, decorative/accent) are separately switch-able and in the case of ambient lights also dimmable. This allows for the ability to configure the kitchen for different purposes and to create a number of different looks and moods.The purpose of ambient light is essentially to provide sufficient background illumination to "support" the other types of lighting and show them off to their best effect. Mostly people don't notice ambient light and tend to assume that lighting design rests on the more showy lighting features. It's not unlike the bass track in a song - you only realize how important it is to the overall structure of the sound when it's either too loud or too soft, but when it's just right then everything else gets the credit.The typical modern kitchen lighting layout works perfectly well in terms of lighting design, but it has a couple of major drawbacks, mainly because in order to get the kind of crisp light needed in a kitchen the default option has become halogen lamps. These are hugely inefficient and operate at extremely high temperatures. Well over 90% of the electricity you pay good money for to light your kitchen is wasted as heat which itself presents a fire risk to any material located in close proximity.But there is a simple solution that delivers the same excellent light quality but costs a fraction to run and runs cool to the touch (touch a halogen bulb only if you want third degree burns). We're talking of course about LED lighting which is now easily available as retrofit replacements for MR16 halogen spot lights in both the 12v GU5.3 and main GU10 formats, and as LED strip lighting for use under cabinets and accenting cupboards and plinths etc.Replacing conventional MR16 spots with LEDs is pretty much a matter of pulling out the old and inserting the new, but with the proviso that quite a few low voltage LED lights do require constant voltage transformers (also called LED drivers) rather than common or garden variable voltage electronic transformers, but on the plus side you can usually run quite a few LED lights off a single transformer.LED lights on the whole appear slightly sharper than their incandescent cousins which can result in a slightly harsh look. An easy way to control light appearance is to aim at different surfaces; for example even the most crisp LED spot light can be made to render a warm glow by reflecting

    the light off for example terracotta tiles, or natural wood or simply a warmly colored wall. Likewise, you can create a highly dramatic look by bouncing LED light onto materials such as enamel, steel and granite all of which tend to be commonly found in kitchens.,,Good lighting is a main ingredient of a successful trade-show booth. Just the right lighting system can help an artist create the atmosphere of a fine-craft gallery. This will lure gallery owners

    the isles and into your booth – the first step toward making a sale.Lighting off

    is a relatively expensive investment. So how does the budget-conscious artist find the right solution?When it comes to choosing a lighting system, artists new to the trade show circuit often become overwhelmed. Prices vary wildly, and each convention center may have its own lighting rules. Lighting technology is changing rapidly, making the choices harder still.This article details what I learned while tackling the challenge of lighting my 10’X10’ booth at the American Craft Retailers Expo (ACRE), a large wholesale show for American and Canadian craft artists. As I am new to trade shows, this information is meant only as a pointer for artists in the process of choosing lighting, and perhaps also for more seasoned artists looking to update their systems.In examining many different lighting options, my objective was to illuminate my glass jewelry beautifully but inexpensively. I wanted the lights to be lightweight and modular, to fit in boxes for shipping to the show. I was looking for contemporary styling, in silver or black. And I wanted to have at least one special lighting effect – not too flashy – to give my booth a unique element.In his CD on booth design, art business consultant Bruce Baker suggests 1,000 watts will light up a 10’X10’ booth very effectively. I decided to stay at or under 500 watts, however, because the ACRE show includes 500 watts with the booth price, and the halogen lighting I ultimately decided upon illuminates my displays very well. Since I bought the lights at a “big-box” store with sites in virtually every city in the U.S., I can add more lights once I’m at the trade show if necessary.The Battle of the BulbContractors Choice Lighting () says a light fixture is simply a “bulb holder.” The bulb, therefore, should drive one’s choice of a fixture. This is somewhat true for trade-show lighting, although the fixtures may dictate the types of bulbs, depending on the choices available at the store where one shops for the lights. The CCL website offers a “Bulb Photometrics” page ([photometrics.html]), whose graphical representation is a refreshing departure from the complex descriptions of lighting options that have proliferated on the web.Halogen is the bulb of choice for many trade show exhibitors. It offers a crisp, white light. Although people commonly refer to halogen as non-incandescent, it is in fact a kind of incandescent lamp. It generates light by using a thin filament wire made of tungsten, heated to white by passing an electric current through it. According to General Electric, the first halogen lamp was developed in 1959 – not too long ago for many of us!Halogen bulbs differ significantly from the traditional type of incandescents we grew up with. The halogen bulb’s filament is surrounded by halogen gases (iodine or bromine, specifically). These gases let the filaments operate at higher temperatures. The end result is a higher light output per watt.The gases also do something rather miraculous: Tungsten tends to evaporate off the filament over time, and the gases actually help re-deposit the tungsten onto the filament. This extends the bulb’s life way beyond that of the traditional incandescent bulb, whose evaporated tungsten clings to the walls of the bulb like a smoky apparition and eventually the uncoated filament snaps. Who hasn’t rattled a burnt-out light bulb and enjoyed the jazzy cymbal sound of the broken filament inside?In addition to giving off more light than traditional incandescent bulbs, halogen bulbs emit a whiter light that provides better color rendition. “For highlighting and bringing out true colors, use halogen lamps,” suggests USA Light and Electric’s website (). “Nothing looks better than the drama brought in with halogen lamps.”Baker

    also suggests halogen lights – floodlights in particular – for a contemporary look, especially for jewelry and glass. It’s important to consider that other fine craft materials such as ceramics and wood might be better enhanced with halogen spotlights, or even with some of the more traditional incandescent lights that emit a warmer color.Having decided upon halogen lighting, my next task would be to choose bulbs. The ACRE show takes place at the Las Vegas Convention Center, which has instituted a strict halogen lighting policy. Each light cannot exceed 75 watts, and all halogen bulbs must be factory sealed in glass (not in a removable lens or linear shape).Thankfully, there is plenty of factory-sealed halogen lighting, in the form of PAR halogen bulbs. PAR is an acronym for “parabolic aluminized reflector.” PAR bulbs have a built-in reflecting surface made of pressed glass. The glass provides both an internal reflector and prisms in the lens for control of the light beam.PAR bulbs are numbered, as in PAR 16, PAR 20, PAR 56. The PAR number refers to the bulb shape. has a halogen section of the site where you can quickly compare the various PAR bulbs visually. Within a given category of PAR bulbs there are various wattages, wide and narrow spotlights and floodlights, different base sizes, and even different colors.Fortunately I was able to skip the process of deciding on a PAR bulb by deciding first where to shop for my lights (more on that below).Power IssuesWhen you go to shop for track lights, you’ll notice there’s a choice between 12-volt and 120-volt fixtures. 120 is the standard voltage that comes directly into most homes and offices – and convention centers.For a lamp using 120 volts, no additional parts are necessary beyond a regular socket. 120-volt fixtures generally are lighter than 12-volt fixtures because they don’t need a transformer. They also cost less and can use halogen or regular incandescent bulbs.I stopped short of investigating 12-volt fixtures, except to find out that they step down the amount of energy being used to a lower voltage, and thus are more energy efficient. They require a transformer to convert the 120-volt household current to 12 volts, and they may require hardwiring (although one artist I know found a 12-volt fixture with a built-in transformer which she was able to plug into a 120-volt outlet. A 12-volt fixture accommodates very efficient bulbs that offer a variety of wattages and beam spreads, including the 50-watt MR-16, which is popular in galleries.I decided on 120-volt lighting for the trade show, because I wouldn’t have to worry about transformers and could just plug it in.Choosing a Store and Track LightingI read the ACRE online forum for clues about where to buy lighting. What one artist said struck me as eminently sensible: He buys all his lighting at Home Depot, because if anything goes wrong at the show, he can find a store nearby for replacement parts.This was something to consider: Tempting as the gorgeous designs might be, special-order lighting of any kind introduces the risk of having a malfunctioning light for the duration of a show.Another artist on the ACRE online forum said he buys his lights from Lowes. It probably doesn’t matter which big-box store one chooses, as long as there’s one in every city.Since I was new to trade shows and this was to be my first lighting kit, I resisted choosing from the many good suppliers on the web. I settled on the limited but attractive selection at Lowes. A side benefit of this was that my choices were comfortably narrowed.Within the category of halogen lighting, you can get either track lights or stem-mounted lights (with arms extending outward). I went with track lights. This was partly because the stem lights I found on the web were relatively expensive and Lowe's didn’t offer them, and partly because with track lights I could have one cord instead of several hanging down.The Lowes lighting salesperson was helpful in putting together a full package from the track lighting on display and in stock. I decided on four, two-foot tracks to keep the size of my shipping boxes down. Here’s a rundown of what I bought:·4 two-foot track sections, Portfolio brand, black finish, Item #. Each section holds 2 lights, for a total of 8. Total:

    $23.12·8 Flared Gimbal Track Lights, Portfolio brand, Item #, with a satin chrome finish for a contemporary look. They are easy to attach to the track by following the directions. Total: $80.76·8 halogen bulbs, Par 20, 50-watt, for bright, crisp light. I bought several floodlights and a couple of spotlights. The bulbs are very packable, at a little over 3” long and 2.5” in diameter. Total: $60.00·2 Miniature Straight Connectors by Portfolio, Item #, for joining two of the track sections end to end. The idea is to have only one cord to plug in from a row of four lights. Total: $5.92.·2 Cord and Plug Sets, Portfolio brand, Item #, to power track from a standard AC wall outlet. I connected these to the end of the two of the track sections by unscrewing the covering on one side of the track. Total: $17.06·Various Multi-Purpose Ties (cable ties), by Catamount, for attaching tracks to booth pipes. Total: $5.00·2 heavy-duty extension cord/power strips – 14-gauge, 15-feet, with three outlets each, Woods brand, from Lowe’s, Item #, model. Total: $22.00Grand total: $213.86The Gimbal lights I chose only accept a 50-watt, PAR 20 bulb, which made it easy to pick out the bulbs. So in this case, the fixture drove the choice of bulb, not the other way around.According to the Bulb Photometrics page at Contractors Choice Lighting, a PAR 20, 50-watt halogen flood bulb will emit a beam of light with a 5’4” diameter when it reaches 10 feet away. It offers about 12 foot-candles worth of light at 10 feet away from the bulb (a foot-candle is the level of illumination on a surface one foot away from a standard candle.)For the sake of comparison, a PAR 30 beam offers a diameter of more than 8’ at 10 feet

    and you still get about 14 foot-candles at that distance. What happens away,

    if you notch it up to a 75-watt bulb? You get a lot more foot-candles (38) at 10 feet away. This suggests that larger trade-show booths might want to take advantage of higher PAR and higher watt bulbs.All together, the track lighting system I chose uses 400 watts of electricity. This left me another 100 watts to add specialty or accent lighting to my booth, while still remaining at the 500-watt limit.Cords, Plugs and Hanging LightsThe Las Vegas Convention Center has very strict rules for cords, plugs, and hanging lights.The two-pronged, 18-gauge cords that the manufacturer has attached to your lights are acceptable (leave the UL tags and labels intact). These lighting cords cannot be plugged into the convention center outlet, however. Instead, you must plug them into a three-pronged, heavy duty, 14-gauge extension cord – or a breaker strip with a 14-gauge cord. You can then plug that 14-gauge extension cord into the convention center outlet.A 14-gauge extension cord is capable of handling 1,825 watts. It’s helpful to read the brief extension-cord sizing and safety information on the web pages of the Underwriters Laboratories (consumers/cords.html) and the University of Florida Cooperative Extension Service ([http://edis.ifas.ufl.edu/FY800]) before purchasing a cord.Bruce Baker suggests the cord be 20 feet with six outlets, and that it include a cord reel. I couldn’t find this type of cord at Lowe’s, so I decided on two 15-foot, heavy-duty, 14-gauge extension cord/power strips, each offering three outlets. If you have a larger booth, you can find a 25-foot cord with three outlets at Lowe’s.There are so many different approaches to hanging lights, and so many variables to consider, that it could be a topic for another article. In general, you can hang or clip lights onto a cross bar or onto the “hard walls” of your display if you have them. Depending on the rules of a particular trade show and the size your lighting system, you may be permitted to attach the lights to the booth’s existing pipe and drape.Since my booth design does not include my own walls, my lights will attach either to the existing pipe or to a cross bar. Cable ties (commonly called “zip ties”) appear to be tool of choice for attaching tracks to the pipes or bars, and even for attaching additional cross bars to existing pipe and drape. One artist I know uses Velcro strips, followed by cable ties to secure the attachments. There are a few

    entire websites for cable ties. One of them is.I purchased Multi-Purpose Ties from Home Depot. They can bundle 4 inches in diameter, withstand temperatures up to 185 degrees Fahrenheit, and hold up to 50 lbs.Accent Lighting: LEDsThere are many ideas for accent lighting – although a fair treatment of the topic is beyond the scope of this article. Light-emitting diode (LED) lighting is one technology that is experiencing breakthroughs and growing fast. It takes many LEDs to equal the light output of a 50-watt bulb, and LEDs are fairly expensive, so LEDs aren’t ready for prime time when it comes to lighting a whole up applications for LEDs, however, that booth.There are several close-

    are worth looking into now. An example is the in-counter light bar sold by MK Digital Direct at(at a whopping $175 per foot). The more affordable MK Sparkle Light Pocket ($30) is a portable device that has extra long-life of over 100,000 continuous hours and promises to give jewelry “maximum sparkle and scintillation.”The Nexus mini LED light system (), meanwhile, offers a lot of illumination for its size – a puck shape not much bigger than a quarter. The company says it is for direct display lighting of crystal and glass, and it can even be submerged in water. The light is attached to a 12’ cable that ends in a plug, and has “mode switch” with seven different color choices. Unfortunately, white is not one of the color choices, and at $25 it’s a bit expensive. Still, a few of these lights combined with room lighting could draw viewers into your booth and toward your most dramatic displays.LEDS also include tube lights, flexible lights, linear lights, and bulbs. Superbright LEDs (edison.html ) has a collection of 120-volt screw-in LED bulbs for accent and other low-lighting applications, as well as a host of other fascinating products such as “plant up-light fixtures.”At this writing, the search was still on for accent lighting to give my booth an extra special glow. Stay tuned for a future article on the results.Online ResourcesThe following list is not an endorsement, but rather a starting point for research on lighting systems, cable ties, and accent lighting.- inexpensive and many choices, has “Bulb Photometrics” page to help determine how much light and what kind you want from a bulb- stem-mounted and track lights- large selection of lighting and bulbs- quick visual comparison of PAR bulbs (in halogen section)- Cable (zip) ties for securing track lights to pipe- LED lights for jewelry cases- a nice selection and visual layout of stem-mounted and other lighting (but not cheap)- good technical information and images of lights set-ups for trade shows; several stem-mounted clip-on designs- LED accent lighting, including screw-in bulbs and light bars,,LED stands for Light Emitting Diodes. This technology has actually been with us for a very long time. They began life as components in electronic appliances, such as televisions, computers, remote controls and digital clocks. Now they are even lighting our homes. You will hear a lot of people claiming that LED Light Bulbs are 'revolutionising' the lighting industry, but you may also be wondering why exactly this is. The advantages they hold over conventional forms of lighting are many and varied. This article will take you through a few of them.Energy EfficientOne of the main drawbacks of traditional lighting is that a lot of the energy they consume is wasted. In fact, only about 10 per cent of a typical light bulbs energy is converted into useful light, the rest is lost as wasted heat. This is largely due to their design and the filaments they use. LED Lights do not have the same problem. They convert about 90 per cent of the energy they use into useful light. This means they use a lot less energy in achieving the same brightness. It only takes about 4 watts in energy for an LED Bulb to achieve 60 Watts of brightness. This is even more impressive than Compact Fluorescent Lamps (CFLs).Long LastingThe average lifespan of an incandescent bulb is about 1,000 hours. This is because their delicate filaments heat up and burn out quite quickly. As such, you can expect to be changing your bulbs a couple of times a year, a cost that mounts up over time. Because they don't rely on a filament,

    LED Bulbs can last much longer. They last anywhere between 30,000 and 50,000 hours. As such, you will only be changing an LED Light once over a period of several years.CostOne of the biggest drawbacks about these Bulbs is cost. The initial asking price for an LED Bulb is significantly higher than incandescent. However, you should not be put off by this. These are designed to pay for themselves overtime, so instead of baulking at the immediate price, you should calculate the cost over a long period of time.Theactualcost of an incandescent bulb is a lot more than its initial price. Overtime you will end up paying much more in labour expenses, replacement costs and electricity bills.Due to their low energy use and longer lifespan these Lights begin paying for themselves very quickly by lowering your electricity bills and maintenance costs.VersatilityLED can be manufactured to very small sizes, which makes them a lot more versatile. Most of these Lights are classified as 'retrofit.' This means they will swap straight over with your existing bulbs without the need for rewiring. The range of LED Light Bulbs now include all standard light fitting, such asand12V MR16 Spotlights, and domestic fittings such as B22 Bayonet Cap and E27 Edison Screw.DurableLED Lights are actually a lot more durable than standard light bulbs. Incandescent bulbs and halogens are quite fragile, particularly their delicate filaments. LED Light Bulbs can withstand a lot of punishment before they break, making them even more versatile.The energy efficiency and cost effectiveness of LED Light Bulbs is really driving demand and in the near future you can expect them to be used in even more commercial and domestic light setups. It really is time to say goodbye to wasteful incandescent bulbs and ephemeral Compact Fluorescents., The bulbs are very packable, This is somewhat true for trade-show lighting, which is popular in galleries,”At this writing, and each convention center may have its own lighting rules, making them even more versatile, wide and narrow spotlights and floodlights, Depending on the rules of a particular trade show and the size your lighting system.”The Nexus mini LED light system (www,All together, Prices vary wildly, my lights will attach either to the existing pipe or to a cross bar,Having decided upon halogen lighting,Due to their low energy use and longer lifespan these Lights begin paying for themselves very quickly by lowering your electricity bills and maintenance costs. Still. As such, They are easy to attach to the track by following the directions,I decided on 120-volt lighting for the trade show, and so many variables to consider,ufl,edu/FY800]) before purchasing a cord.LEDS also include tube lights. you should calculate the cost over a long period of time,This article details what I learned while tackling the challenge of lighting my 10’X10’ booth at the American Craft Retailers Expo (ACRE). you can find a 25-foot cord with three outlets at Lowe’s, In fact, different base sizes. decorative/accent) are separately switch-able and in the case of ambient lights also dimmable, In general.

     The halogen bulb’s filament is surrounded by halogen gases (iodine or bromine, As I am new to trade shows, such as televisions, only about 10 per cent of a typical light bulbs energy is converted into useful light, including the 50-watt MR-16,Theactualcost of an incandescent bulb is a lot more than its initial price,Various Multi-Purpose Ties (cable ties), PAR is an acronym for “parabolic aluminized reflector. Within a given category of PAR bulbs there are various wattages,Accent Lighting: LEDsThere are many ideas for accent lighting – although a fair treatment of the topic is beyond the scope of this article. 120-volt fixtures generally are lighter than 12-volt fixtures because they don’t need a transformer,There are several close-up applications for LEDs. They convert about 90 per cent of the energy they use into useful light,2 heavy-duty extension cord/power strips – 14-gauge.Energy EfficientOne of the main drawbacks of traditional lighting is that a lot of the energy they consume

    is wasted,com/photometrics, We're talking of course about LED lighting which is now easily available as retrofit replacements for MR16 halogen spot lights in both the 12v GU5, you should not be put off by this, Stay tuned for a future article on the results, Total: $60, with three outlets each.·, These are designed to pay for themselves overtime,Cords, that it could be a topic for another article.The purpose of ambient light is essentially to provide sufficient background illumination to "support" the other types of lighting and show them off to their best effect, You can then plug that 14-gauge extension cord into the convention center outlet, What one artist said struck me as eminently sensible: He buys all his lighting at Home Depot.)For the sake of comparison. An easy way to control light appearance is to aim at different surfaces, Total: $22, Unfortunately. and accent lighting,In examining many different lighting options. This extends the bulb’s life way beyond that of the traditional incandescent bulb, The light is attached to a 12’ cable that ends in a plug, This allows for the ability to configure the kitchen for different purposes and to create a number of different looks and moods, It only takes about 4 watts in energy for an LED Bulb to achieve 60 Watts of brightness, PAR 20 bulb, and hold up to 50 lbs.html]), Total: $80, A side benefit of this was that my choices were comfortably narrowed,” PAR bulbs have a built-in reflecting surface made of pressed glass, but rather a starting point for research on lighting systems, and perhaps also for more seasoned artists looking to update their systems, An example is the in-counter light bar sold by MK Digital Direct at(at a whopping $175 per foot), model. Instead, I was looking for contemporary styling,The Battle of the BulbContractors Choice Lighting (www, It generates light by using a thin filament wire made of tungsten, If the main lighting in the room is located in the middle of the ceiling then you invariably find yourself working in your own shadow, I decided to stay at or under 500 watts.I stopped short of investigating 12-volt fixtures, Since I bought the lights at a “big-box” store with sites in virtually every city in the U, and partly because with track lights I could have one cord instead of several hanging down. and at $25 it’s a bit expensive, These gases let the filaments operate at higher temperatures.

     as long as there’s one in every city. which makes them a lot more versatile, in silver or black, Overtime you will end up paying much more in labour expenses, or natural wood or simply a warmly colored wall, so LEDs aren’t ready for prime time when it comes to lighting a whole booth, This is even more impressive than Compact Fluorescent Lamps (CFLs), plugs, a cost that mounts up over time, use halogen lamps. The range of LED Light Bulbs now include all standard light fitting, you can hang or clip lights onto a cross bar or onto the “hard walls” of your display if you have them,com/consumers/cords, not the other way around. so I decided on two 15-foot, but you may also be wondering why exactly this is, white light, remote controls and digital clocks. There are a few entire websites for cable ties, Par 20.In addition to giving off more light than traditional incandescent bulbs, and you still get about 14 foot-candles at that distance, These lighting cords cannot be plugged into the convention center outlet. Because they don't rely on a filament,LED stands for Light Emitting Diodes, but on the plus side you can usually run quite a few LED lights off a single transformer,4 two-foot track sections. Item #,00Grand total: $213, meanwhile.

     flexible lights, This article will take you through a few of them.000 continuous hours and promises to give jewelry “maximum sparkle and scintillation. I decided on four, Total: $23, One of them is, And I wanted to have at least one special lighting effect – not too flashy – to give my booth a unique element. It's not unlike the bass track in a song - you only realize how important it is

    to the overall structure of the sound when it's either too loud or too soft, Bulbs, however.000 hours,html ) has a collection of 120-volt screw-in LED bulbs for accent and other low-lighting applications, white is not one of the color choices, 18-gauge cords that the manufacturer has attached to your lights are acceptable (leave the UL tags and labels intact), Item #. steel and granite all of which tend to be commonly found in kitchens, These are hugely inefficient and operate at extremely high temperatures. art business consultant Bruce Baker suggests 1, several stem-mounted clip-on designs- LED accent lighting, artists new to the trade show circuit often become overwhelmed.PAR bulbs are numbered.

     although the fixtures may dictate the types of bulbs, a few of these lights combined with room lighting could draw viewers into your booth and toward your most dramatic displays,The two-pronged, computers, PAR 56, which made it easy to pick out the bulbs,The energy efficiency and cost effectiveness of LED Light Bulbs is really driving demand and in the near future you can expect them to be used in even more commercial and domestic light setups. The initial asking price for an LED Bulb is significantly higher than incandescent, it is best if possible to ensure that the various lighting elements (task.12·, It offers a crisp, I resisted choosing from the many good suppliers on the web, “For highlighting and bringing out true colors. you will only be changing an LED Light once over a period of several years,3 and main GU10 formats, the rest is lost as wasted heat, 50-watt halogen flood

    will emit a beam of light with a 5’4” diameter when it reaches 10 feet bulb

    away, and has “mode switch” with seven different color choices, you may be permitted to attach the lights to the booth’s existing pipe and drape, halogen bulbs emit a whiter light that provides better color rendition. I bought several floodlights and a couple of spotlights, by Catamount, One artist I know uses Velcro strips. whose graphical representation is a refreshing departure from the complex descriptions of lighting options that have proliferated on the web, Light-emitting diode (LED) lighting is one technology that is experiencing breakthroughs and growing fast, ambient, no additional parts are necessary beyond a regular socket, Portfolio brand. Woods brand, the track lighting system I chose uses 400 watts of electricity,Power IssuesWhen you go to shop for track lights.

     If you have a larger booth. kitchens are fundamentally work areas and require task lighting which typically needs to be placed between you and the items you are working with, and even for attaching additional cross bars to existing pipe and drape. Cable ties (commonly called “zip ties”) appear to be tool of choice for attaching tracks to the pipes or bars, and even different colors, and domestic fittings such as B22 Bayonet Cap and E27 Edison Screw. and as LED strip lighting for use under cabinets and accenting cupboards and plinths etc. offers a lot of illumination for its size – a puck shape not much bigger than a quarter, and bulbs, However, because if anything goes wrong at the show,76·. Portfolio brand, 120 is the standard voltage that comes directly into most homes and offices – and convention centers,ifas,Replacing conventional MR16 spots with LEDs is pretty much a matter of pulling out the old and inserting the new,CostOne of the biggest drawbacks about these Bulbs is cost. PAR 20, you can create a highly dramatic look by bouncing LED light onto materials such as enamel. Likewise,superbrightleds,com), Kitchen task lighting can of course be quite decorative in its own right since it often reflects off wall tiles and accents shiny kitchen utensils and appliances,” suggests USA Light and Electric’s website (www, They require a transformer to convert the 120-volt household current to 12 volts, Plugs and Hanging LightsThe Las Vegas Convention Center has very strict rules for cords.In his

Report this document

For any questions or suggestions please email
cust-service@docsford.com