DOC

7201 Perform quality tests on unbacked tufted carpet

By Lois Kelly,2014-07-13 17:23
15 views 0
7201 Perform quality tests on unbacked tufted carpet

NZQA registered unit standard 7201 version 6

     Page 1 of 3

Title Perform quality tests on unbacked tufted carpet

    Level 3 Credits 8

    Purpose This unit standard is for people working in the carpet

    manufacturing industry. People credited with this unit standard

    are able to: demonstrate knowledge of unbacked carpet tests

    and reasons for testing; sample and test unbacked tufted

    carpet; and analyse and report on test results.

Classification Textiles Manufacture > Carpet Manufacture

Available grade Achieved

Explanatory notes

    Competency is to be demonstrated over the range of products produced in the workplace for both plain and patterned carpet.

Outcomes and evidence requirements

Outcome 1

    Demonstrate knowledge of unbacked carpet tests and reasons for testing.

Range stitch rate, pull out, pile weight, pile height, regain, shade, texture, surface effect,

    pattern.

Evidence requirements

    1.1 Description identifies test procedures and reasons for carrying out the tests.

Outcome 2

Sample and test unbacked tufted carpet.

Range stitch rate, pull out, pile weight, pile height, regain, shade, texture, surface effect,

    pattern.

Evidence requirements

    2.1 Frequency and timing of sample are according to operating procedure.

    2.2 Samples are taken and handled according to test method.

    Range selection, holding conditions, sub-sampling.

    Apparel and Textile Industry Training Organisation ; New Zealand Qualifications Authority 2012

    SSB Code 101722

NZQA registered unit standard 7201 version 6

     Page 2 of 3

2.3 Test procedures are carried out according to test method.

    Range equipment assembled, conditioning requirements, test technique.

    2.4 Results are calculated according to the test method, and are recorded

    according to workplace requirement.

Outcome 3

Analyse and report on test results.

Range stitch rate, pull out, pile weight, regain, shade, texture, surface effect, pattern.

Evidence requirements

    3.1 Test sample variables are calculated according to the test method.

    3.2 Results are studied and compared with plant standards to assess conformance

    to standard.

    3.3 Deviations from plant standard are reported to the designated plant staff and

    according to plant procedure.

    3.4 Test records, results, and reports are kept according to plant procedure.

Status and review information

    Registration date 28 May 1996

    Date version published 16 July 2010

    Planned review date 31 December 2012

Accreditation and Moderation Action Plan (AMAP) reference 0030

    This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Please note

    Providers must be granted consent to assess against standards (accredited) by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

    Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.

    Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.

Apparel and Textile Industry Training Organisation ; New Zealand Qualifications Authority 2012

    SSB Code 101722

NZQA registered unit standard 7201 version 6

     Page 3 of 3

    Consent requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

    Please contact the Apparel and Textile Industry Training Organisation training@atito.org.nz if you wish to suggest changes to the content of this unit standard. Apparel and Textile Industry Training Organisation ; New Zealand Qualifications Authority 2012

    SSB Code 101722

Report this document

For any questions or suggestions please email
cust-service@docsford.com