DOC

In accordance with IDAPA 58 - Department of Environmental Quality

By Margaret Perkins,2014-09-24 05:19
12 views 0
In accordance with IDAPA 58 - Department of Environmental QualityIn a

    DEQ AIR QUALITY PROGRAM Concrete Batch Plant Form CBP 1410 N. Hilton, Boise, ID 83706 Revision 6 For assistance, call the 08/28/08 Air Permit Hotline1-877-5PERMIT

    Please see instructions on page 3 before filling out the form.

     1. Company Name: 2. Facility Name: 3. Facility ID No:

4. Brief Project Description:

5. Proposed Initial Plant Location:

    6. Nearest City: 8. Estimated 7. County: Startup Date: 9. Reason for Permit to construct a new source Application: Permit to operate an existing unpermitted source

     Permit to modify/revise an existing permitted source (identify the permit below)

     Permit No.:

     Issue Date:

     Facility ID:

    10. Review draft Check here to indicate you would like to review a draft permit prior to final issuance. request.

    Concrete Batch Plant

    11. Manufacturer: 12. Model: 13. Manufacture Date:

    14. Maximum Hourly Throughput: (cy/hour)

    15. Maximum Daily Throughput: (cy/day)

    16. Maximum Annual Throughput: (cy/year)

    17. Requested Annual Throughput: (cy/year)

    Cement Storage Silo Baghouse No.

    18a. Manufacturer: 19a. Model: 20a. Stack Height from Ground: (ft) 21b. Exit Air Flow Rate: (acfm) 22a. Stack Inside Diameter: (ft) 23a. * PM Control Efficiency: (%) 10

    24a. * Manufacturer Grain Loading Guarantee: * Attach manufacturer’s PM control efficiency guarantee, if available. 10

    Cement Storage Silo Baghouse No.

    18b. Manufacturer: 19b. Model: 20b. Stack Height from Ground: (ft) 21b. Exit Air Flow Rate: (acfm) 22b. Stack Inside Diameter: (ft) 23b. * PM Control Efficiency: (%) 10

    24b. * Manufacturer Grain Loading Guarantee: * Attach manufacturer’s PM control efficiency guarantee if available. 10

    Page 1

Cement Supplement (such as flyash) Storage Silo Baghouse No.

    18c. Manufacturer: 19c. Model:

    20c. Stack Height from Ground: (ft) 21c. Exit Air Flow Rate: (acfm)

    22c. Stack Inside Diameter: (ft) 23c. * PM Control Efficiency: (%) 10

    24c. * Manufacturer Grain Loading Guarantee: * Attach manufacturer’s PM control efficiency if available. 10

    Cement Supplement (such as flyash) Storage Silo Baghouse No.

    18d. Manufacturer: 19d. Model:

    20d. Stack Height from Ground: (ft) 21d. Exit Air Flow Rate: (acfm)

    22d. Stack Inside Diameter: (ft) 23d. * PM Control Efficiency: (%) 10

    24d. * Manufacturer Grain Loading Guarantee: * Attach manufacturer’s PM control efficiency if available. 10

    Weigh Batcher Baghouse(s)

    18e. Manufacturer: 19e. Model:

    20e. Stack Height from Ground: (ft) 21e. Exit Air Flow Rate: (acfm)

    22e. Stack Inside Diameter: (ft) 23e. * PM Control Efficiency: (%) 10

    24e. * Manufacturer Grain Loading Guarantee: * Attach manufacturer’s PM control efficiency if available. 10

     $1,000 PTC application fee is enclosed

     A Portable Equipment Relocation Form (PERF) is enclosed.

    Portable Equipment Relocation Form. Complete the Portable Equipment Relocation Form (PERF). An electronic copy of the PERF can be obtained from the DEQ website at www.deq.idaho.gov/air/permits_forms/forms/ptc_relocation.doc for Word format). Important note: In addition to being submitted with this PTC application, a PERF must also be completed and filed at DEQ at least 10 days in advance of relocating any of the equipment covered in this application.

    Certification of Truth, Accuracy, and Completeness (by Responsible Official, as defined in IDAPA 58.01.01.006) I hereby certify that based on information and belief formed after reasonable inquiry, the statements and information contained in this and any attached and/or referenced document(s) are true, accurate, and complete in accordance with IDAPA 58.01.01.123-124.

Responsible Official Signature Responsible Official Title Date

Print or Type Responsible Official Name

    Page 2

    Instructions for Form CBP

OVERVIEW

    This application is for the construction and operation of portable and stationary concrete batch plants in all areas of Idaho except any nonattainment area. Nonattainment areas are identified on the DEQ website at www.deq.idaho.gov/air/data_reports/monitoring/nonattainment_map.pdf. If you are planning to locate in a nonattainment area, please call the Air Permit Hotline at 1-877-5PERMIT prior to submitting an application.

INSTRUCTIONS

Provide the requested information in this form. Attach additional sheets if needed.

    Attach a Portable Equipment Relocation Form (PERF) in accordance with the provided information. Fees. In accordance with the Rules for the Control of Air Pollution in Idaho (IDAPA 58.01.01.224 and

    226), DEQ cannot process this application unless it is accompanied by a one thousand dollar ($1,000) application fee. If the purpose of this permit is to change the name or ownership of the holder of a PTC when DEQ determines no other review or analysis is required, the application fee is waived. The rules can be accessed at adm.idaho.gov/adminrules/rules/idapa58/58index.htm.

    Mail. Please mail the completed PTC application and PERF form hardcopies (plus CD if possible), and the $1,000 application fee to the address below. The processing of this PTC application cannot commence without payment.

     Air Quality Program Office Application Processing

     Department of Environmental Quality

     1410 North Hilton

     Boise, ID 83706-1255

    Page 3

Report this document

For any questions or suggestions please email
cust-service@docsford.com