The premium Model 3601 is for commercial and industrial facilities where temperature control, energy-efficiency and durability
considerations are all-important.
? Sections shall be 13/4" thick sandwich construction consisting of exterior
and interior steel skins filled by foamed-in-place polyurethane foam. ? Both steel skins to be separated by a continuous foam thermal break. ? Clopay's three stage pre-painting process is inside and out for a
durable, maintenance-free finish
? Stucco embossed exterior steel skin with micro-grooved ribs ? Foamed-in-place polyurethane; R value of 15.14, Sectional U value of .066
CLOPAY(r) MODEL 3601
Quality Assurance - Doors shall be insulated steel sectional overhead type
as manufactured for Clopay Building Products. Each door is provided as
one complete unit including sections, brackets, tracks, counterbalance mechanisms, hardware (list options) to suit the opening and headroom available. Standard maximum size is 26'2" wide x 20' high.
Materials and Construction - Sections shall be 13/4" thick sandwich construction consisting of exterior and interior steel skins filled by
foamed-in-place polyurethane foam. Both steel skins to be separated by a
continuous foam thermal break. Steel skins shall be roll formed commercial
quality hot-dipped galvanized per ASTM A-294, A-653, phosphate coated, pre-painted with primer and baked-on polyester top coat. Door sections constructed of .0175" min. (26 gauge) exterior and .0155" min. (27 gauge) interior skins. To be stucco emboss texture exterior and interior with .040" minor rib, 4" or 5" on center. End stiles shall be .058" (16 gauge) galvanized with a vinyl thermal break between the end stile and the exterior
steel skin. All stiles are engineered for easy hardware attachment through
pre-punched holes, double end stiles as required. Full 33/4" continuous hinge
back-up strip, pre-punched for hinge attachment. Full length vinyl astragal
retainer with U-shaped flexible PVC vinyl. Section joint to form
tongue and groove joint. 3" galvanized steel step plate/lift handle provided on
Energy Values - Section: U = .066 Tested R = 15.14 Tested
Finish - The section exterior and interior is pre-painted steel consisting of a
hot-dipped galvanized coating applied to the base metal. A phosphate treatment is applied before a baked-on primer. This prime coat is finished with
a polyester coat for rust protection. The exterior skin carries a 750 hour
salt spray rating. The interior portion of the skin that is adhered to the
polyurethane foam is a baked-on coating. Doors are available in white or
brown exterior finish. FINISH GUARANTEED AGAINST RUST-THROUGH FOR A FULL TEN (10) YEARS.
Hardware - All hinges and brackets to be manufactured of hot-dipped galvanized steel, 14 gauge minimum. Ten ball steel rollers to be full floating ball bearing in case-hardened steel races, mounted to fit the taper of the track.
Tracks - 2" or 3" track. Vertical tracks to be minimum of 16 gauge galvanized
steel tapered and mounted for wedge type closing. Horizontal tracks to be
minimum 14 gauge galvanized steel, reinforced with minimum 13 gauge galvanized steel angles as required. 3" track is 12 gauge.
Spring Counterbalance - Door assembly to be operated by a torsion spring counterbalance mechanism with a helically wound, oil tempered torsion spring mounted on a galvanized steel tube or solid steel shaft as
required. Cable drums are die cast aluminum with high strength galvanized
aircraft cable with minimum 7 to 1 safety factor.
Locking - Inside spring loaded slide bolt lock on end stile shall engage slot in track.
Wind loading - Contact factory for specific wind load requirements.
A. Glazing - 8"x 24" or 12"x 24" window lites of cellular PVC frame construction: 3/4" insulated glass. Full vision section, pre-painted white
or brown; glazing options include 1/8" DSB, 1/8" plexiglass,1/4" wire or
tempered glass, and 7/16" insulated glass.
B. High Cycle Spring - Available in 25,000, 50,000, or 100,000 cycle. C. Track - Vertical lift, high lift, follow the roof slope and low headroom
track available, 2" or 3" as required.
D. Weatherstripping - Complete perimeter seals available in_ various materials.
E. Locking - Five pin cylinder lock with outside key, 161/2" lock bar. F. Mullions - Carry away (2") up to 14' high, roll-away up to 14' high, _
and swing-up available. (consult factory)
G. Pass Door - 32" wide x 80" high, maximum 14'2" wide section. H. Installation - Install door including sections, brackets, guides, tracks,
etc. in accordance with final shop drawings (if required) and instructions
by Clopay Building Products Company.
Rustproof - Panels are pre-painted inside and out to inhibit rust. _ Hot-dipped, galvanized steel is painted with primer and given a tough oven-baked polyester top coat to provide the most rust-resistant steel door available. Ten year warranty against rust-through.
Door Height # of Sections
6'3" to 8'0" 4
8'3" to 10'0" 5
10'3" to 12'0" 6_
12'3" to 14'0" 7
14'3" to 16'0" 8_
16'3" to 18'0" 9_
18'3" to 20'0" 10
Insulated Thermally Broken Doors
1 3/4'' thick door sections
27 Gauge (.0155'' min.) inside steel skin, baked-on white finish Full 26 Gauge (.0175'' min.) galvanized outside steel skin, coated white
Stucco embossed exterior steel skin with micro-grooved ribs
Stucco embossed interior steel skin with slight "V" grooved ribs
10 ball bearing rollers
Heavy-duty steel end stiles, galvanized Inside security lock
Tongue and groove joint
22 Gauge continuous reinforcing strip Heavy-duty hinges Polyurethane foam-in-place core sandwiched between
Step plate and lift handle
Rigid PVC bottom weatherseal retainer PVC vinyl bottom weatherseal
Door Width Max # of Window Lites Up to 9'2" 2
9'4" to 12'2" 3
12'3" to 16'2" 4
16'4" to 20'2" 5_
20'4" to 24'2" 6
24'4" to 27'2" 7_