DOC

21805 Cost and recommend an international transport service and ...

By Bradley Olson,2014-12-03 15:44
12 views 0
21805 Cost and recommend an international transport service and ...

NZQA registered unit standard 21805 version 2

     Page 1 of 3

    Title Cost and recommend an international transport service and route for

    given consignments

    Level 3 Credits 6

Purpose People credited with this unit standard are able to:

    ; identify the characteristics and stowage requirements of

    consignments;

    ; analyse routes and transport services to meet consignment

    and customer requirements;

    ; recommend route and transport service or combination of

    transport services to meet consignment and customer

    requirements.

Classification Logistics > Freight Forwarding

Available grade Achieved

Explanatory notes

1 Definitions:

     INCOTERMS are standard trade definitions used in international sales contracts.

    Refer INCOTERMS 2010, International Chamber of Commerce publication 715

    available on http://www.iccwbo.org/incoterms/.

     Organisational requirements include any legal requirements, standards, codes of

    practice, organisational and/or site policies and procedures, industry best practice

    and manufacturers’ instructions. These must be available to candidates, providers,

    and assessors.

     Transport services may include road, rail, sea, air or any combination of these.

    2 A minimum of three consignments, each involving a different cargo type is required.

Outcomes and evidence requirements

Outcome 1

    Identify the characteristics and stowage requirements of consignments.

NZ Motor Industry Training Organisation New Zealand Qualifications Authority 2012

    (Incorporated) (NZMITO)

    SSB Code 101778

NZQA registered unit standard 21805 version 2

     Page 2 of 3

Evidence requirements

    1.1 Identify the consignments according to type of goods, characteristics, and

    stowage requirements.

    Range type of goods may include but are not limited to unitised, loose,

    bulk, dangerous, liquid, heat sensitive, perishable, out of gauge’;

    characteristics may include but are not limited to weight,

    dimensions, packaging and handling requirements;

     stowage may include but is not limited to dry, temperature

    controlled, general, segregated.

    1.2 Identify the consignments according to origin, destination, and required delivery

    date.

Outcome 2

    Analyse routes and transport services to meet consignment and customer requirements.

Evidence requirements

    2.1 Analyse costs and limitations of alternative routes and transport services in

    relation to consignment and customer requirements.

    Range limitations may include but are not limited to service frequency,

    journey time, weight restrictions;

     evidence of two routes is required.

Outcome 3

    Recommend route and transport service or combination of transport services to meet consignment and customer requirements.

Evidence requirements

    3.1 Recommend a route which is consistent with the characteristics of the

    consignment and stowage requirements.

    3.2 Recommend a route which is consistent with the evaluation of route and

    transport service alternatives and includes costs, estimations of time, and

    limitations.

    Replacement information This unit standard replaced unit standard 13231, unit

    standard 13234, and unit standard 13235.

Planned review date December 2016

NZ Motor Industry Training Organisation New Zealand Qualifications Authority 2012

    (Incorporated) (NZMITO)

    SSB Code 101778

NZQA registered unit standard 21805 version 2

     Page 3 of 3

    Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment

    Registration 1 26 July 2005 N/A

    Review 2 17 June 2011 N/A

    Republished 2 31 August 2012 N/A

Consent and Moderation Requirements (CMR) reference 0092

    This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Please note

    Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

    Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.

    Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.

    Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

    Please contact the NZ Motor Industry Training Organisation (Incorporated) (NZMITO) info@mito.org.nz if you wish to suggest changes to the content of this unit standard. NZ Motor Industry Training Organisation New Zealand Qualifications Authority 2012

    (Incorporated) (NZMITO)

    SSB Code 101778

Report this document

For any questions or suggestions please email
cust-service@docsford.com