DOC

SECTION 11480 - Sportsfield Specialties

By Danielle Howard,2014-09-30 04:48
17 views 0
SECTION 11480 - Sportsfield Specialties

     GP4103 AdjustRight? College 6ft Offset Goal Post

    ;

    SECTION 11 6600 Athletic Equipment Field

    (Formally section 11480)

PART 1 GENERAL

1.01 WORK INCLUDED

    A. Provide all equipment and materials, and do all work necessary to furnish

     and install the athletic equipment, as indicated on the drawings and as

     specified herein. Athletic equipment shall include, but not be limited to:

     1. GP4103 AdjustRight? College 6ft Offset Goal Post(s)

1.02 RELATED WORK

    A. Examine contract documents for requirements that affect work of this

     section. Other specification sections that directly relate to the work of

     this section include, but are not limited to:

     1. Section 02200 Earthwork; Excavation and Backfill and

     establishment of sub-grade elevations.

     2. Section 02700 Asphalt, Concrete, and Pavement

     3. Section 02794 Synthetic Grass & Turf

     4. Section 02793 Synthetic Field Surfacing

     5. Section 03110 Cast-in-Place Concrete

1.03 REFERENCES

    A. Comply with applicable requirements of the following standards. Where

     these standards conflict with other specified requirements, the most

     restrictive requirements shall govern.

     1. National Collegiate Athletic Association (NCAA)

     2. International Amateur Athletic Association (IAAF)

    3. American Sports Builders Association (ASBA)

     4. American Wood Preserver's Association (AWPA)

     5. Manufacturers Data and Recommended Installation

     Requirements

1.04 SUBMITTALS

A. Manufacturers Product Data

     1. Provide manufacturers product data prior to actual field Athletic Equipment 11 6600 05.05.10

     installation work, for Architects or Owners representatives

     review.

B. Shop Drawings

     1. Provide drawings of the manufacturers recommended

     installation and foundation requirements prior to actual field

     installation work, for Architects or Owners representatives

     review.

1.05 QUALITY ASSURANCE

    A. Manufacturers warranties shall pass to the Owner and certification made

     that the product materials meet all applicable grade trademarks or conform

     to industry standards and inspection requirements.

1.06 PRODUCT DELIVERY AND STORAGE

    A. Materials delivered to the site shall be examined for damage or defects in

     shipping. Any defects shall be noted and reported to the Owners

     representative. Replacements, if necessary, shall be immediately re-

     ordered, so as to minimize any conflict with the construction schedule.

     Sound materials shall be stored above ground under protective cover or

     indoors so as to provide proper protection.

    ;PART 2 PRODUCTS

2.01 College 6ft Offset Football Goal Post(s)

    A. BASE: GP4103 AdjustRight? College 6ft Offset Football Goal Post as

     manufactured by:

    Sportsfield Specialties Inc.

    P.O. Box 231

    41155 State Highway 10

     Delhi, NY 13753

    p. 888-975-3343

    f. 607-746-8481

    www.sportsfieldspecialties.com

B. COMPONENTS:

    1. Gooseneck support: #4215 fabricated of 6” Schedule 40

    aluminum pipe (6.625in OD), 5.0ft radius, 6.0ft offset. Athletic Equipment 11 6600 05.05.10

    2. Crossbar: #4211 fabricated of 6” Schedule 40 aluminum pipe

    (6.625in OD).

    a. Length: 18ft 6in

    b. With internal rotating sleeve for upright adjustment that

    utilizes precision fit textured mating surfaces, for

    locking into the vertical position.

    3. Uprights: #4236 fabricated of extruded 6061 T6 aluminum tube

    (4.0in OD) with rigid wire loop at upper end

    a. Length: 30.0ft

     4. Powder Coat Finish: Yellow or White

    5. Installation package consisting of the following components:

    a. Ground sleeve: #4212, 8.0in Schedule 40 steel pipe,

    5.0ft long

    b. Access frame: #4570 fabricated of .125in aluminum,

    22.25in square, 6.0in high, with eight anchor bolts, filler

    plugs fabricated of 0.5in pressure treated plywood

    and .1875in (3/16") aluminum.

    6. Accessories:

    a. Directional wind flags.

    b. Touch-up paint (Powder Coat Specific).

    c. #4412 Assembly bolts, and nuts- Stainless Steel

PART 3 EXECUTION

3.01 INSTALLATION OF EQUIPMENT

    A. All athletic equipment shall be installed as recommended with

     manufacturer's written directions, and as indicated on the drawings.

     END OF SECTION

    Athletic Equipment 11 6600 05.05.10

Report this document

For any questions or suggestions please email
cust-service@docsford.com