DOC

500-200-DCdoc - Waterous

By Dale Griffin,2014-05-06 08:39
13 views 0
500-200-DCdoc - Waterous

SPECIFICATIONS INTEGRATED CROSSMOUNTS:

    750-200-DC, 1000-200-DC AND 1250-200-DC

    CAFSystems? With Fast and Effective Pump-and-Roll Capabilities

    Waterous integrated crossmount CAFSystems blend the speed and effectiveness of CAFS with true pump-and-roll capabilities. Designed for transverse mounting within a pump compartment, the engine pump and air compressor are integrated as a single, skid?mounted unit. Available flows from 750 GPM (2850 L/min) up to 31250 GPM (4750 L/min) and air capacity of 200 SCFM (5.6 m/min). All units come with an industry exclusive five-year warranty.

     The 750-200-DC develops a minimum of 400 GPM of water at 125 Engine: 3psig (1500 l/min @ 8.6 bar) and 200 cfm at 125 psig (5.6 m/min @ 8.6 Deutz model BF6M1012E turbocharged and aftercooled, six cylinder, bar) simultaneously. With the compressor disengaged, the water pump liquid cooled, diesel engine providing 170 horsepower, 127 kW. is capable of the following ratings: Pump: ; 750 GPM @ 150 psig / 2850 l/min @ 10.3 bar Waterous CXVT centrifugal fire pump. CXVT utilizes a high?tensile ; 750 GPM @ 165 psig / 2850 l/min @ 11.4 bar gray iron body, bronze impeller, replaceable wear rings and ; 525 GPM @ 200 psig / 1985 l/min @ 13.8 bar maintenance?free mechanical seals. ; 375 GPM @ 250 psig / 1420 l/min @ 17.2 bar

     Engine: The 1000-200-DC develops a minimum of 400 GPM of water at 125 Deutz model BF6M1013 turbocharged and aftercooled, six cylinder, 3psig (1500 l/min @ 8.6 bar) and 200 cfm at 125 psig (5.6 m/min @ 8.6 liquid cooled, diesel engine providing 192 horsepower, 143 kW. bar) simultaneously. With the compressor disengaged, the water pump Pump: is capable of the following ratings: Waterous CXVT centrifugal fire pump. CXVT utilizes a high?tensile ; 1000 GPM @ 150 psig / 3800 l/min @ 10.3 bar gray iron body, bronze impeller, replaceable wear rings and maintenance?free mechanical seals. ; 1000 GPM @ 165 psig / 3800 l/min @ 11.4 bar ; 700 GPM @ 200 psig / 2650 l/min @ 13.8 bar ; 500 GPM @ 250 psig / 1892 l/min @ 17.2 bar

     Engine: ; The 1250-200-DC develops a minimum of 400 GPM of water at 125 3Deutz model BF6M1013C turbocharged and aftercooled, six cylinder, psig (1500 l/min @ 8.6 bar) and 200 cfm at 125 psig (5.6 m/min @ liquid cooled, diesel engine providing 231 horsepower, 172 kW. 8.6 bar) simultaneously. Capable of developing the following ratings: Pump: ; 1250 GPM @ 150 psig / 4750 l/min @ 10.3 bar Waterous CXVT centrifugal fire pump. CXVT utilizes a high?tensile ; 1250 GPM @ 165 psig / 4750 l/min @ 11.4 bar gray iron body, bronze impeller, replaceable wear rings and ; 875 GPM @ 200 psig / 3312 l/min @ 13.8 bar maintenance?free mechanical seals. ; 625 GPM @ 250 psig / 2365 l/min @ 17.2 bar

    Sales/Applications Assistance Service Assistance When you purchase Waterous equipment, not only do you get quality Phone: 651-450-5234 (Press 3) Phone: 651-450-5200 products, you get quality service. Our expert service technicians are pumps@waterousco.com Fax: 800-488-1228 the best in the business and they are always happy to answer any service@waterousco.com service questions you might have.

     2008 Waterous Company 125 Hardman Avenue South, South St. Paul, Minnesota 55075-2456 USA F-2507 www.waterousco.com Specifications subject to change without notice. Rev: 08/21/08

    SPECIFICATIONS INTEGRATED CROSSMOUNTS: 500. 750. 1000 AND 1250-200-DC

All Models:

    Pressure Relief: Air Compressor:

    The air compressor is an oil-flooded, rotary screw type, sized An optional pressure relief system is available to comply with 3to supply a minimum of 200 scfm (5.6 m/min) of usable air. NFPA 1906 standards.

    Pneumatic Modulating Inlet Valve: Priming System (Optional):

    The air compressor is controlled by the pneumatic modulation Waterous VPOS Oil-free primer. Rotating parts in the VPOS inlet valve mounted on the air end. The pneumatic modulation are made of corrosion-resistant, anodized aluminum, stainless inlet valve controls air delivery while maintaining constant steel and composite materials. pressure. Fuel System: Auto Sync Balancing System: The engine draws fuel from the chassis fuel tank. Automatically maintains the air pressure within +/- 5% of the Lubrication: water pump pressure throughout the pressure range. The Auto Pressure lubrication system with oil pressure warning light and Sync Balancing System is located on the operator's panel and spin-on oil filter. An extension hose is installed on the engine allows for the following modes: oil drain with a valve located at the oil pan and a plug installed ; Automatic - Air pressure matched to water pressure in the end of the hose to facilitate oil changes. ; Fixed - Air pressure defaults to manual setting on Electrical: compressor mounted control valve. 12-volt electric with 55A alternator, electric ignition and start ; Unload - Air pressure reduced to 40 psig (2.8 bar) for switch. standby operations

    ; Run - Air compressor in run operation. Air pressure Exhaust:

    determined by Auto or Fixed setting. Heavy-duty exhaust muffler

    Air Compressor Oil System: Air Compressor Transmission A spin-on, full-flow oil filter unit and a thermostatic valve are all “Poly Chain” drive and 8mm pitch sprockets. part of the system to control oil flow to the cooler. All lines are Panel Mounted Instruments: routed in braided hose conforming to SAE 100R1 standards for The following items and controls are provided for installation on hydraulic hose. the pump operator's panel: Modular Air/Oil Separator: ; Pump engine tachometer Replacement elements for the oil filter and separator are ; Pump engine hourmeter available.

    ; Pump engine oil pressure gauge w/light and alarm Air Compressor Cooling System:

    The air compressor is cooled by the unit's water pump, utilizing ; Pump engine coolant temp. gauge w/light and alarm a copper and brass shell and tube heat exchanger. When the ; Compressor temp. gauge w/warning light and alarm fire pump is operating, water flows through the heat exchanger. ; Pump engine voltmeter The system maintains recommended operating temperatures ; Engine ignition/start switch throughout the full operational range in ambient temperatures

    up to 115?F (46.1? C). ; AutoSync pressure balance controls and instruction plate

    Foam Systems (Optional): ?; Advantus Foam Systems with operator interface terminal,

    pump module with electric motor/motor driver and

    microcontroller unit, foam concentrate strainer, WYE strainer,

    shielded electrical cables for connection of all electronic

    components, process manifold with flowmeter and

    associated components as specified

    ; Aquis? Foam Proportioner with operator interface terminal

    (OIT), pump module with electric motor/motor driver and

    microcontroller unit, foam concentrate strainer, shielded

    electrical cables for connection of all electronic components,

    foam inject check valve, WYE Strainer and flowmeter and

    tee.

    On-Site Delivery Instruction (Optional):

    Contact factory for pricing.

     2008 Waterous Company 125 Hardman Avenue South, South St. Paul, Minnesota 55075-2456 USA F-2507 www.waterousco.com Specifications subject to change without notice. Rev: 08/21/08

Report this document

For any questions or suggestions please email
cust-service@docsford.com