DOC

10523 Install optical fibre ground wire conductors and associated

By Jamie Robertson,2014-05-06 08:32
10 views 0
10523 Install optical fibre ground wire conductors and associated

    10523 version 4

    Page 1 of 4

    Install optical fibre ground wire conductors and associated hardware

Level 4

    Credits 8

    Purpose People credited with this unit standard are able to: interpret scope of work for

    optical fibre ground wire conductors and associated hardware; string optical

    fibre ground wire conductors; tension optical fibre ground wire conductors;

    attach optical fibre ground wire conductors to line hardware; report work on

    optical fibre ground wire conductors and associated hardware; and complete

    optical fibre ground wire conductors and associated hardware emergency

    procedures.

Subfield Electricity Supply

    Domain Electricity Supply - Distribution Networks

    Status Registered

    Status date 16 April 2010

    Date version published 16 April 2010

    Planned review date 31 December 2014

    Entry information Prerequisites: Unit 10509, Climb and work on electricity

    network structures; Unit 10510, Use machinery, plant

    and equipment in an electricity network environment;

    and Unit 10512, Joint electricity network overhead

    conductors; or demonstrate equivalent knowledge and

    skills.

    Accreditation Evaluation of documentation and visit by NZQA and

    industry.

    Standard setting body (SSB) Electricity Supply Industry Training Organisation

    Accreditation and Moderation Action Plan (AMAP) reference 0120

    This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Special notes

    1 This unit standard is intended for, but not restricted to, workplace assessment. The

    range statements across the unit standard can be applied according to industry

    specific equipment, procedures, and processes.

     ; New Zealand Qualifications Authority 2012

    10523 version 4

    Page 2 of 4

    2 Safety of personnel and plant must be a priority throughout the assessment. If the

    safety requirements are not met the assessment must stop.

    3 Performance and work practices in relation to the elements and performance criteria

    must comply with all current legislation, especially the Electricity Act 1992, and any

    regulations and codes of practice recognised under that statute; the Health and

    Safety in Employment Act 1992; and the Resource Management Act 1991.

    Electricity supply industry codes of practice and documented industry procedures

    include the Safety Manual Electricity Industry (SM-EI) Wellington: Electricity

    Engineers’ Association. A full list of current legislation and industry codes is available

    from the Electricity Supply Industry Training Organisation, PO Box 1245, Waikato

    Mail Centre, Hamilton 3240.

4 The phrase in accordance with industry requirements is implicit in all elements and

    performance criteria in this unit standard.

5 Industry requirements include all asset owner requirements; manufacturers’

    specifications; and enterprise requirements which cover the documented workplace

    policies, procedures, specifications, business, and quality management requirements

    relevant to the workplace in which assessment is carried out.

    6 Asset owner refers to the owner of an electricity supply network that takes its point of

    supply from Transpower NZ and delivers electricity to industrial, commercial, and

    residential customers.

Elements and performance criteria

Element 1

    Interpret scope of work for optical fibre ground wire conductors and associated hardware.

Performance criteria

1.1 Optical fibre ground wire conductors are established.

    Range size, type.

1.2 Structure arrangement is established.

1.3 Installation work plan and method are established.

    Range equipment location, protection of equipment, pull length, rigging

    set-up, structure access.

1.4 Conductor sag tension is established.

    Range calculation, sag chart, tension.

1.5 Location of work site is established.

    Range environment, line crossings, road crossings.

     ; New Zealand Qualifications Authority 2012

    10523 version 4

    Page 3 of 4 Element 2

    String optical fibre ground wire conductors.

Performance criteria

2.1 Conductors are handled.

    Range work site, transport, preparation.

2.2 Conductors are strung.

    Range conventional stringing, roller blocks stringing.

Element 3

    Tension optical fibre ground wire conductors.

Performance criteria

3.1 Conductors are pulled up to specified sag and tension.

    3.2 Conductors are terminated at the deadend.

    Range binding, clamp, compression, preform.

Element 4

Attach optical fibre ground wire conductors to line hardware.

Performance criteria

    4.1 Conductors are attached to structures.

    Range binding, clamp, preform.

4.2 Conductors are jointed.

4.3 Conductor joints are tested.

4.4 Conductor hardware is attached.

     ; New Zealand Qualifications Authority 2012

    10523 version 4

    Page 4 of 4

    Element 5

    Report work on optical fibre ground wire conductors and associated hardware.

Range includes but is not limited to equipment history, test reports and results,

    service report, work report.

Performance criteria

5.1 Reported information is complete, concise, and legible.

    5.2 Information is recorded in the prescribed format and filed within the scheduled

    timeframe.

Element 6

    Complete optical fibre ground wire conductors and associated hardware emergency procedures.

Performance criteria

    6.1 Emergency procedures are explained in accordance with contractual

    agreements.

6.2 Bypass conductors are jointed.

Please note

    Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

    Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards.

    Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

    Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Electricity Supply Industry Training Organisation info@esito.org.nz if

    you wish to suggest changes to the content of this unit standard.

     ; New Zealand Qualifications Authority 2012

Report this document

For any questions or suggestions please email
cust-service@docsford.com