DOC

26081 Remove and install rubber fitted automotive glass

By Tim Ruiz,2014-03-18 09:36
19 views 0
26081 Remove and install rubber fitted automotive glassand,AND,glass

    26081 version 1

    Page 1 of 4

    Remove and install rubber fitted automotive glass

Level 3

    Credits 6

    Purpose This unit standard is for people who are involved in automotive reglazing.

     People credited with this unit standard are able to: prepare to remove and

    install rubber fitted automotive glass; remove rubber fitted automotive glass

    from vehicle; install rubber fitted automotive glass; and clean work areas and

    maintain rubber fitted automotive glass installation equipment.

Subfield Glass and Glazing

    Domain Automotive Reglazing

    Status Registered

    Status date 20 November 2009

    Date version published 20 November 2009

    Planned review date 31 December 2014

    Entry information Open.

    Accreditation Evaluation of documentation and visit by NZQA and

    industry.

    Standard setting body (SSB) Building and Construction Industry Training Organisation

    Accreditation and Moderation Action Plan (AMAP) reference 0073

    This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Special notes

1 Definitions

     Worksite requirements refer to instructions to staff on policy and procedures which

    are documented in memo or manual format and are available in the workplace.

    These requirements include but are not limited to company specifications and

    procedures, work instructions, product quality specifications, legislative requirements.

     Manufacturer’s specifications refer to industry requirements that relate to the

    products being supplied or used.

     ; New Zealand Qualifications Authority 2014

    26081 version 1

    Page 2 of 4

     Materials and equipment refer to industry approved materials and equipment that

    are recognised within the industry as being the most suited to complete the task in a

    professional and competent manner with due regard to safe working practices.

     Personal protective equipment refers to equipment designed for the protection of

    eyes, hands, feet, and hair.

     Rubber fitted includes but is not limited to self locking, rope in, weather seal,

    locking strip.

2 All work must be done in accordance with the requirements of Health and Safety in

    Employment Act 1992; Resource Management Act 1991; Land Transport Rule:

    Vehicle Repair 1998 (Rule 34001); Land Transport Rule: Glazing, Windscreen Wipe

    and Wash, and Mirrors 1999 (Rule 32012/1), available at http://www.ltsa.govt.nz.

    3 Evidence is required of a minimum of three removals and installations of rubber fitted

    automotive glass.

4 Resources include Vehicle Inspection Requirements Manual (VIRM), New Zealand

    Transport Agency, available at http://www.ltsa.govt.nz.

Elements and performance criteria

Element 1

Prepare to remove and install rubber fitted automotive glass.

Performance criteria

    1.1 Techniques used to remove and install rubber fitted automotive glass are

    identified and described in accordance with worksite requirements.

    Range includes but is not limited to commercial, light vehicles.

    1.2 Job requirements are determined from job specifications and the glass

    manufacturer’s specifications in terms of method to be used, and materials and

    equipment required.

    Range job specifications include but are not limited to window size,

    shape and position; materials; VIRM glazing requirements;

    maintaining vehicle structural integrity.

    1.3 Vehicle preparation requirements are determined in accordance with the glass

    manufacturer’s specifications.

    1.4 Health and safety requirements are identified in terms of personal protective

    equipment, materials and equipment requirements.

    1.5 Materials and equipment required for the removal and installation are selected

    in accordance with manufacturer’s specifications.

    1.6 Procedures for minimising waste material are identified in accordance with

    worksite requirements.

     ; New Zealand Qualifications Authority 2014

    26081 version 1

    Page 3 of 4

    Element 2

Remove rubber fitted automotive glass from vehicle.

Performance criteria

    2.1 Automotive glass is removed without causing damage to equipment or injury to

    personnel and without causing unnecessary damage to the vehicle.

    2.2 Automotive glass is removed in accordance with worksite requirements.

Element 3

Install rubber fitted automotive glass.

Performance criteria

    3.1 Material specifications are identified and checked against the job specifications.

    3.2 Rubber fitted automotive glass is installed in accordance with manufacturer’s

    specifications.

3.3 Sealant material is applied in accordance with manufacturer’s specifications.

    3.4 Installation is completed without causing damage to glass or equipment or injury

    to personnel and without causing unnecessary damage to the vehicle.

    3.5 Vehicle and/or glass is cleaned and prepared for customer vehicle collection in

    accordance with worksite requirements.

    3.6 Warranty and safety information is communicated to the vehicle owner in

    accordance with legislative and worksite requirements.

    3.7 Installation is documented in accordance with worksite requirements.

Element 4

    Clean work areas and maintain rubber fitted automotive glass installation equipment.

Performance criteria

    4.1 Waste and scrap materials are removed from the work area and disposed of in

    accordance with worksite requirements.

    4.2 Work area is cleaned and inspected and left in a safe and serviceable condition

    in accordance with worksite requirements.

    4.3 Equipment is maintained in accordance with manufacturer’s specifications and

    worksite requirements.

     ; New Zealand Qualifications Authority 2014

    26081 version 1

    Page 4 of 4

    4.4 Work area is maintained in a safe and serviceable condition in accordance with

    worksite requirements.

Please note

    Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

    Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards.

    Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

    Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

    Please contact the Building and Construction Industry Training Organisation info@bcito.org.nz if you wish to suggest changes to the content of this unit standard.

     ; New Zealand Qualifications Authority 2014

Report this document

For any questions or suggestions please email
cust-service@docsford.com