DOC

TENDER FORM PART-II

By Mario Weaver,2014-07-01 16:21
6 views 0
TENDER FORM PART-II

     JAWAHAR NAVODAYA VIDYALAYA, BABHULGAON, DIST. AKOLA

    Price schedule for supply of Steel Almirah to JNV 2012-13

1 STEEL ALMIRAH:

    Size 72x36x19” (excluding legs of 6”) fitted with

    4 fitted/fixed shelves making 5 compartments

    with double door with three way locking device

    controlled by implacable 6 lever lock with in

    non-interchangeable stainless steel keys in

    duplicate. All joints outside and inside should be

    spot or arc welded and neatly finished by

    grinding. The outside corner should be rounded

    off to give good appearance. The edge of doors

    and shelves should be properly bent to ‘U’ shape

    1” width to ensure good strength and the outer

    edge of U-bent of the door lengthwise should be

    double folded and neatly folded/finished.

    Longitude rib of 15 cm wide including bent to

    required shape should be provided and fixed to

    each door and its centre.

    LOCKING DEVICE:

    Three ways locking device with 10 gauge MS

    sheet for locking rod of 10 mm dia with strong

    bracket at top and bottom to hold the locking rod

    with six lever lock should be provided. 65mm

    six strong locks to be fixed.

    HANDLE:

    Should be made out of brass cast alloy with

    nickel/chrome plated. Lock should be of similar

    to GODREJ make/type.

     NOTE: The MS sheet of 18 gauge thickness for doors and 20 gauge for body

    all-round and shelves. An anti-corrosive treatment should be given prior to painting.

    Almirah should be given a primer coat and two coats of good quality synthetic enamel

    (of indenter’s choice). The finishing should ensure a smooth glossy and non-wavy

    surface.

     I the undersigned is abide by the terms and conditions of the tender and the

    rates quoted above are final and inclusive of all kinds of taxes-levies and packing and

    forwarding charges etc., The rates quoted above are holds goods upto 30-04-2013

     (R.A.SINGH)

     PRINCIPAL

    Signature:-

    Name & Address of Firm & Rubber Stamp :-

    Tel No.

    Bank Name :-

    A/c No. :-

    Date :-

    Place :-

     1

    JAWAHAR NAVODAYA VIDYALAYA, BABHULGAON, DIST. AKOLA

    Price schedule for supply of Steel Book Case to JNV 2012-13

Sl Particulars Rate per Unit / Pc (in Rupees)

    In figures In figures

    1 STEEL BOOK CASE:

    Book case will have four compartments

    each compartment shall be operated

    independently with slide in shutters. Each

    shutter should be fitted with lock. A

    common key shall open all four shutters.

    Book case should be made with 18 gauge

    CR sheet.

    CR sheet.

    Dimensions: 1675Hx838Wx305D (in mm)

    HANDLE: Should be made out of brass cast

    alloy with nickel/chrome plated. Lock

    should be of similar to GODREJ make/type.

    For each compartment 2 Handles to be

    provided

    Good quality of glass is to be used for

    compartments

     NOTE:. An anti-corrosive treatment should be given prior to painting. Steel

    book case should be given a primer coat and two coats of good quality synthetic

    enamel (of indenter’s choice). The finishing should ensure a smooth glossy and non-

    wavy surface.

     I the undersigned is abide by the terms and conditions of the tender and the

    rates quoted above are final and inclusive of all kinds of taxes-levies and packing and

    forwarding charges etc., The rates quoted above are holds goods upto 30-04-2013.

    (R.A.SINGH)

     PRINCIPAL

    Signature:-

    Name & Address of Firm & Rubber Stamp :-

    Tel No.

    Bank Name :-

    A/c No. :-

    Date :-

    Place :-

     2

JAWAHAR NAVODAYA VIDYALAYA, BABHULGAON, DIST. AKOLA

    Price schedule for supply of Duel Desk to JNV 2012-13

Sl Particulars Rate per Unit / Pc (in Rupees)

    In figures In figures

    1 DUEL DESK

    Total weight of Bench / Duel desk 37-40

    Kgs. Approximately.

    Steel frame with 1 ? inch 6mm steel

    angle fitted with 18 mm guage steel sheet.

    Book shelf 1 ? inch 6mm steel angle

    frame fitted with 18 mm guage steel sheet.

    Writing desk top : 1 ? inch 6 mm steel

    angle frame fitted with 18 mm guage steel

    sheet.

    Frame with 1 ? inch 16 guage Square

    Pipe.

    Book shelf front side and back rest with 18

    mm moulded steel sheet.

    Note- The duel desk should be as per the

    existing one in the vidyalaya. Can be

    inspected for specifications during office

    hours.

     NOTE:. An anti-corrosive treatment should be given prior to painting. Duel

    desk should be given a primer coat and two coats of good quality synthetic enamel

    (of indenter’s choice). The finishing should ensure a smooth glossy and non-wavy surface.

     I the undersigned is abide by the terms and conditions of the tender and the

    rates quoted above are final and inclusive of all kinds of taxes-levies and packing and

    forwarding charges etc., The rates quoted above are holds goods upto 30-04-2013.

     (R.A.SINGH)

     PRINCIPAL

    Signature:-

    Name & Address of Firm & Rubber Stamp :- Tel No.

    Bank Name :-

    A/c No. :-

    Date :-

    Place :-

     3

Report this document

For any questions or suggestions please email
cust-service@docsford.com