DOC

CCVP Objectivies - Cisco Unified Communications Manager Exam

By Ricky Jenkins,2014-07-11 17:01
5 views 0
CCVP Objectivies - Cisco Unified Communications Manager Exam ...

CCVP Objectivies - Cisco Unified Communications Manager

Exam Objectivies for 5 exams to complete the CCVP certification.

Cvoice 6.0: Cisco Voice over IP (CVOICE) v6.0

    ? Describe VoIP, components of a VoIP network, VoIP protocols, special requirements for VoIP

    calls, and Codecs.

    ? Configure gateway interconnections to support VoIP and PSTN calls.

    ? Describe the basic signaling protocols used on voice gateways and configure a gateway to

    support calls using the various signaling protocols.

    ? Define a dial plan, describing the purpose of each dial plan component, and implement a dial

    plan on a voice gateway..

    ? Describe gatekeeper functions, protocols, and operation and implement an H.323 gatekeeper to

    provide dial plan resolution and call admission control.

    ? Implement a Cisco Unified Border Element gateway to connect to an Internet Telephony Service

    Provider.

QOS Exm: Implementing Cisco Quality of Service (QoS) v2.2

    ? Identify the components of the Cisco Unity system, describe their standard and optional

    features, and explain and how they integrate into a unified messaging system

    ? explain the need to implement Quality of Service (QoS) and explain methods for implementing

    and managing QoS

    ? identify and describe different models used for ensuring QoS in a network and explain key IP

    QoS mechanisms used to implement the models

    ? explain the use of MQC and AutoQoS to implement QoS on the network

    ? use Cisco QoS queuing mechanisms to manage network congestion

    ? use Cisco QoS congestion avoidance mechanisms to reduce the effects of congestion on the

    network

    ? use Cisco QoS traffic policing and traffic shaping mechanisms to effectively limit the rate

    of network traffic

    ? successfully use Cisco link efficiency mechanisms to improve the bandwidth efficiency of the

    link

    ? correctly select the most appropriate QoS mechanisms for providing QoS using Cisco best

    practices

TUC Exam: Troubleshooting Cisco Unified Communications Systems (TUC) v1.0

The professional will troubleshoot Unified Communications Systems / Solutions and components /

    products by identifying and isolating problems, recommending solutions, and implementing fixes

    ? Describe Cisco Unified Communications Manager including its functions, architecture,

    deployment and redundancy options, and how to install or upgrade. CIPT1 6.0: Implementing Cisco Unified Communications Manager Part 1 (CIPT1) v6.0 ? Perform Cisco Unified Communications Manager platform and general administration, initial configuration, and user management.

    ? Configure Cisco Unified Communications Manager to support on-cluster calling in a singe site

    deployment.

    ? Implement a dial plan in Cisco Unified Communications Manager to make internal calls and

    place calls the PSTN.

    ? Configure Cisco Unified Communications Manager media resources, features and voice mail

    integration.

CIPT2 6.0: Implementing Cisco Unified Communications Manager Part 2 (CIPT2) v6.0

    ? Describe multisite deployment issues and solutions, and describe and configure required dial

    plan elements .

    ? Implement call processing resiliency in remote sites using SRST, MGCP fallback, and Cisco

    Unified Communications Manager Express in SRST mode.

    ? Implement call admission control to prevent oversubscription of the IP WAN.

    ? Implement features and applications that are pertinent for multisite deployments.

    ? Secure a Cisco Unified Communications IP Telephony deployment.

GWGK: Implementing Cisco Voice Gateways and Gatekeepers (GWGK) v2.0

This exam is for the old Callmanager Certification track which is not part ot the

    new Cisco Unified Communications Manager.

    Gateway Deployments Introducing Gateways Implementing H.323 Gateways Implementing MGCP Gateways

    Implementing SIP Gateways Implementing SRST Gateways

    Cisco IP Communiczations PSTN and PBX Imtegrations Introducing PSTN and PBX Trunks Implementing

    Analog Trunks Implementing CAS Trunks Implementing BRI and PRI Trunks Implementing QSIG Trunks

    Dial Plans on IOS Gateways Dial Plan Overview Implementing PSTN Dial Plans on IOS Gateways

    Implementing PSTN Dial Plans on IOS Gateways Implementing Multi Site Dial Plans on IOS Gateways

    Implementing Calling Privileges on IOS Gateways Implementing RSVP Based CAC

    Advanced Gateway Features Implementing Media Resources using IOS Gateway DSPs Implementing FAX

    Support on IOS Gateways Call Applicaitons on IOS Gagteways

    Gatekeeper Deployments Introducing Deployments Implementing Basic Gatekeeper Functionality

    Implementing Gatekeeper Call Adminsion Control Implementing Advanced Gatekeeper Functionality

    Implementing Gatekeeper Redundancy

    IP-IP Gateway IP-IP Gateway Overview Implementing IP-IP Gateways

Cisco Security - CCSP

Exam Objectivies - Total of 3 plus an elective exams needed complete the CCSP

    certification.

SNRS 642-502 - Securing Networks with Cisco Routers and Switches

    ? secure a network using existing Cisco IOS security including Trust and Identy with Identity

    Based Networking Service; Network Foundation Protection including securing the Control,

    Management and Data Plane.

    ? Invoke Secured Connectivity with IPsec and VPNs, and implement Adaptive Threat Defense by

    configuring Cisco Classic and Zone-Based Firewalls and Cisco IOS IPS.

SNAF: Securing Networks with ASA Fundamentals (SNAF) v1.0

    ? Securing Networks with ASA Fundamentals (SNAF) v1.0 is an update to Securing Networks with

    PIX and ASA (SNPA) v5.0, an existing five-day instructor-led course on using the Cisco ASA

    and PIX Security Appliance software version 7.2 to protect network systems from intrusions

    and security threats. In order to cover new features of ASA software version 8.0 and

    preserve the 5-day length of the course, some of the advanced content in SNPA 5.0 has been

    moved to the new Securing Networks with ASA Advanced (SNAA) course. Content that has been

    moved to SNAA includes the following: configuring the ASA 5505 dual-ISP support, configuring

    ASA 5505 VLANs, configuring policy NAT, installing and configuring the Cisco Secure Desktop,

    configuring the security appliance to pass multicast traffic, configuring Layer 7 class maps

    and policy maps, and initializing the AIP-SSM and CSC-SSM.

     Another difference between SNPA 5.0 and SNAF 1.0 is that SNAF 1.0 configurations are

    performed via

     ASDM rather than the CLI. The SNAF 1.0 course covers important new ASA and PIX Security

     Appliance 8.0 features.

PS: Implementing Cisco Intrusion Prevention System (IPS) v6.0

    ? Learners will deploy, configure, and administer Cisco IPS sensors to protect network devices

    as well as efficiently manage IPS alarms

Plus one of the following as an elective

I

SNAA: Securing Networks with ASA Advanced (SNAA) v1.0

    ? Configure policy NAT based on traffic type.

    ? Describe the layer 7 modular policy framework for the security appliance and how it is

    configured.

    ? Describe the layer 7 advanced protocol handling capabilities of modular policy frame and how

    it is configured.

    ? Determine the necessary configuration for the ASA 5505 to be a VPN hardware client.

    ? Configure CSD and DAP for SSL VPN connections on the Cisco ASA.

    ? Identify the steps needed to configure, inspect, and filter traffic with the Content

    Security and Control SSM.

    ? Identify the steps needed to configure the security appliance to identify, alert, and defend

    against attacks.

MARS 642-545: Implementing Cisco Security Monitoring, Analysis and Response

     System (MARS) v3.0

    ? Use CS-MARS to monitor security and host application devices.

    ? Know CS-MARS architecture and how CS-MARS process events.

    ? Know how to use archive and restore features.

    ? Use CS-MARS to run / create / customize reports

    ? Use CS-MARS to investigate an incident and mitigate the security threats.

    ? Use CS-MARS to do customer parser for unknown devices in CS-MARS.

    ? Use CS-MARS to create / customize rules that detects dark net through best practices example.

    ? Know how to tune signature / log level on device side and CS-MARS side.

CANAC: Implementing Cisco NAC Appliance (CANAC) v2.1

The NAC Appliance (Cisco Clean Access) is a "shrink-wrapped" network admission control solution

    that recognizes users, their devices and roles; evaluates the security posture of the endpoint and

    scans for vulnerabilities; and enforces policy in the network. In particular, prior to allowing

    users onto the network, the NAC Appliance (Cisco Clean Access) solution allows administrators to

    authenticate, authorize, interrogate and remediate users and their machines enforcing policy based

    access control on the network.

Report this document

For any questions or suggestions please email
cust-service@docsford.com