DOC

Fault code 1908 stored in ISM control unit

By Ida Russell,2014-10-31 06:38
12 views 0
Fault code 1908 stored in ISM control unit

    - Fault code 1908 stored in ISM control unit - 主题编号 GI27.60-P-032292

    版本 1

    设计组 27.60 Gearshift, control

    日期 04-24-2007

    有效性 Models 164, 251 and 221

    更改原因

投诉

    Fault code 1908 is stored in the ISM (intelligent servo module) control unit.

原因

    The fault code can be set during control unit start-up (with ignition on).

补救

    If fault code 1908 is the only fault code stored and the ISM is functioning the fault code can be ignored

症状

    症状

    Power transmission / Automatic transmission / Automatic transmission operation / Drive position selection / Function / General

    Power transmission / Automatic transmission / Automatic transmission -

    function / Electrical fault/Fault code

    Power transmission / Automatic transmission / Automatic transmission operation / Drive position selection / Function / Electrical fault/Fault code

控制单元/故障代码

    故障代控制单元 故障代码说明

    ISM-Intelligent servo 1908 Component A80 (Intelligent servo module for module DIRECT SELECT) is defective.

Report this document

For any questions or suggestions please email
cust-service@docsford.com