By Katherine Carpenter,2014-03-07 08:46
6 views 0

Creating a real singleton class in Delphi 5

    Creating a real singleton class in Delphi 5

    Abstract:The article describes how to create a class that follows the

     singleton pattern. The class described will take care of the singleton requirements and effects itself, effectively leaving the programmer to use the class as any others.

    Creating a real singleton class in Delphi

    by Lasse Vs

    her Karlsen, Systems Developer for Cintra Software Engineering Errata 1. Implementation of TSingleton.NewInstance had the first test

    one that checked if the Instance variable was assigned switched, the

     or not. -- Fixed 11-08-2000 -

     Thanks to the people that emailed me about this --

     2. Overzealous fix for the first errata, the NewInstance method should now work as stated. -- Fixed 11.08.2000 --

    A singleton is a class that supports the creation of just one object.

     It's like your computer --

     there's just one keyboard. So if you were writing Delphi code that simulated your computer, you would want just one object instance to deal with keyboard read, write, and control activities.

    Articles about singleton classes are rare but there are a few on the Internet. I've seen some in magazines too. But none of these articles

     include sample code to create a real singleton class.

    By "real" I mean that the class itself enforces the one-instance requirement, instead of leaving that task to the programmer.

     All of the articles I have seen so far have required the programmer to use the class in a special way to enforce the singleton pattern. In this article you will see how to create a proper singleton class that includes logic to enforce the one-instance rule.

    Note: The conventional approach, in which the one-

    instance rule is maintained explicitly by the programmer, is not without merit. Real singleton classes like the one I present here effectively hide the details and awareness of the singleton pattern from the

     programmer. The programmer is relieved of the task of enforcing the pattern -- that's good --

     but the programmer may also be unaware of the special nature of the class, which is bad. If you don't know that the class is a singleton class then all sorts of errors can crop up. You have been warned! Writing the code

    Our goal is to write a class that can be used like this: procedure Test;


     s1, s2 : TSingleton;


     s1 := TSingleton.Create;

     s2 := TSingleton.Create;

     // Do something with s1 and s2 here




    (I've left out the try...finally blocks and other safeguards for simplicity's sake.)

    The goal is to make the TSingleton class behave in such a way that both s1 and s2 refer to the same object. Here's what we have to do:

    object the first time Create is called (when s1 is crInstantiate the

    eated above)

    Ensure that when another Create is executed (s2 above), the existing object is reused instead of another one created

    Avoid destroying the object when it's not the last reference that is destroyed (when s2 is freed)

    Destroy the instance when the last reference is destroyed (when s1 is

     freed above)

    Is there a way to override the creation and destruction of a new object in Delphi? There sure is. In the TObject class (the mother of all objects {pun intended}), there are two methods we can use: class function NewInstance: TObject; virtual;

    procedure FreeInstance; virtual;

    NewInstance is responsible for allocating memory to hold a new instance of the class, and FreeInstance is responsible for freeing that memory when the class is through with it.

    These methods control what happens when the object is created and when the object is destroyed. If we overwrite this code, we can alter the default behavior to work the say a singleton class requires. Nothing to it.

    Tracking instances is a little trickier. We must:

    Keep track of each existing instance of our class

    Keep track of how many references there are to this instance Create a new object only when no instance exists

    Destroy the object when the last reference is removed

    To keep track of an existing instance, we will use a global variable.

     Actually, the variable will ultimately be declared inside the Implementation part of a unit so it won't be a true global variable. But the scope must be sufficient to track all the Create and Free calls. We'll call the variable Instance so we know what it refers to. As for keeping track of how many references exist, we need another variable. We can it inside the class or make it a sort-

    of global like Instance. I'll opt for the latter way but do what you feel is best. I'll name this variable Ref_Count.

We now have two variables:


     Instance : TSingleton = nil;

     Ref_Count : Integer = 0;

    I initialize the variables so that initially they don't contain any garbage. I know that the compiler does this automatically, so this is just a readability issue.

    We'll need to declare the TSingleton class above the variable block, and if you take a look at the example files that you can download at the end of this article you'll see that I've put the declaration in t

     of the unit so that it's visible outside of it. he interface part

    Here's the declaration of the TSingleton class:


     TSingleton = class


     class function NewInstance: TObject; override;

     procedure FreeInstance; override;

     class function RefCount: Integer;


    I added the RefCount function so that we can see that it actually works, and it's often handy to be able to read how many references to the object exist. It's not required, however, so you don't have to add it to your singleton classes if you don't need it.

    Ok, now for the implementation of the three methods:

    procedure TSingleton.FreeInstance;


     Dec( Ref_Count );

     if ( Ref_Count = 0 ) then


     Instance := nil;

     // Destroy private variables here

     inherited FreeInstance;



    class function TSingleton.NewInstance: TObject;


     if ( not Assigned( Instance ) ) then


     Instance := inherited NewInstance;

     // Initialize private variables here, like this:

     // TSingleton(Result).Variable := Value;


     Result := Instance

     Inc( Ref_Count );


    class function TSingleton.RefCount: Integer;


     Result := Ref_Count;


    And that's it!

    When you call TSingleton's constructor, a call is placed to the NewInstance method declared in TObject. This method allocates memory to hold the new object and returns it to the constructor. The constructor uses that memory and eventually returns a pointer to the memory to th

    that called the constructor. This pointer is usually stored ine code

     a variable while the object is in use.

    I have overridden the NewInstance method so it will allocate the memory only if no instance of the class exists. If there is an existing instance, the function simply returns that instance to the constructor

     so it will be reused.

    If we call the constructor three times, an object is created only the

     first time. The other two calls simply reuse the first object. The reference count variable let us know that we have three references to the single instance.

    When the program calls the destructor, a call to FreeInstance is placed to free the memory allocated in the constructor. This method, too,

     is overridden so that the object is destroyed only when the last reference is removed.

    If you intend to use a singleton in a multithreaded program, treat the object as you would any variable you share between threads. Because

     that's just what you do: share it between the threads. So you must take special care when changing data.

    Simplicity itself

    As you can see, creating a singleton class doesn't require much effort, just the right knowledge and a few lines of code. My code works fine in Delphi 5. The technique will probably work fine with older versions of Delphi, but I haven't tested it so I don't make any guarantees.

    Before I give you the file to play with, let me give you a few words of warning.

    Don't descend from a singleton class. The reason for that is that there is only one instance and reference count variable. If you derive two classes from TSingleton, only one object will be created. The other class will reuse that object, which will be an instance of a different class. Don't go down that road!

    You can't make singleton components for the simple reason of ownership. A component is owned by a form and one component can't be owned by

     several other components.

    Remember that the constructor and destructor get called for each new reference as they are created and destroyed. Don't initialize private

     variables in the constructor and don't free them in the destructor. Instead, build that code into the NewInstance and the FreeInstance methods, as shown in the comments.

    The order of adjusting Ref_Count in the two methods in conjunction with the rest of the code in those two methods is critical. It has to do with proper creation and destruction when something goes wrong. If your initialization code raises an exception, the order of doing things like shown above will make sure that the class is destroyed proper

     this code at your peril! ly. Alter

    The file that you can download is just a copy of the unit that declares the singleton class described in this article.

    Link to file: CodeCentral entry 15083.

    I'm sure you can find a few places where a singleton class comes in handy and now you have the tools to create your own! If you want to get in touch with me, my email is

    Happy programming!

Report this document

For any questions or suggestions please email