DOC

Automatic transmission 722.9 in limp-home mode

By Christine Carpenter,2014-10-29 06:49
11 views 0
Automatic transmission 722.9 in limp-home mode

    - Automatic transmission 722.9 in limp-home mode - 主题编号 LI27.00-P-040148

    版本 1

    设计组 27.00 General

    日期 01-12-2007

    有效性 All models with automatic transmission 722.9

    更改原因

投诉

    Automatic transmission 722.9 in limp-home mode (intermittently or permanently), fault code or fault code combination 0741/0893/0894/2502/2504/2505/2511/2711/2783 and a swarf profile in the

    transmission oil pan which corresponds to the pattern shown in the attachment.

    文件 名称

    Olwannenmagnete nach Pattern of swarf on magnets in KUB_Schaden_klein.jpg transmission oil pan

原因

    Mechanical faults in torque converter lockup clutch or rear planetary gear set

补救

    Note:

    Only applies if fault codes and the illustrated swarf profile exist in the transmission oil pan:

    1. Remove/install/replace transmission and torque converter

    2. Flush out transmission oil cooler

症状

    症状

    Power transmission / Power transmission, function / Jolting/shuddering during start-off

    Power transmission / Automatic transmission / Automatic transmission -

    function / Limp-home mode

    Power transmission / Power transmission, function / No power flow

Power transmission / Power transmission, function / Vibrations

    Power transmission / Automatic transmission / Automatic transmission -

    function / No power flow

    Power transmission / Automatic transmission / Automatic transmission -

    function / Electrical fault/Fault code

控制单元/故障代码

    故障控制单元 故障代码说明 代码

    ETC-Electronic transmission control 0894 The gear is implausible or (EGS2) (CL (216),M (164),CL (215),C the transmission is (203),R (251),CLS (219),SLK (171),S slipping. ([VGS2_*])

    (220),S (221),CLK (209),E (211),SL

    (230),G (463))

    ETC-Electronic transmission control 2502 The gear is implausible or (EGS2) (CL (216),M (164),CL (215),C the transmission is (203),R (251),CLS (219),SLK (171),S slipping. ([VGS_*])

    (220),S (221),CLK (209),E (211),SL

    (230),G (463))

    ETC-Electronic transmission control 2504 Hydraulic fault in (EGS2) (CL (216),M (164),CL (215),C transmission (disengaging (203),R (251),CLS (219),SLK (171),S shift element does not (220),S (221),CLK (209),E (211),SL disengage). ([VGS_*])

    (230),G (463))

    ETC-Electronic transmission control 0893 Hydraulic fault in (EGS2) (CL (216),M (164),CL (215),C transmission (disengaging (203),R (251),CLS (219),SLK (171),S shift element does not (220),S (221),CLK (209),E (211),SL disengage). ([VGS2_*])

    (230),G (463))

    ETC-Electronic transmission control 2505 Hydraulic fault in (EGS2) (CL (216),M (164),CL (215),C transmission (engaging (203),R (251),CLS (219),SLK (171),S shift element does not (220),S (221),CLK (209),E (211),SL engage). ([VGS_*])

    (230),G (463))

    ETC-Electronic transmission control 2711 Hydraulic fault in (EGS2) (CL (216),M (164),CL (215),C transmission (engaging (203),R (251),CLS (219),SLK (171),S shift element does not (220),S (221),CLK (209),E (211),SL engage). ([VGS2_*])

    (230),G (463))

    ETC-Electronic transmission control 2511 The friction power of the (EGS2) (CL (216),M (164),CL (215),C torque converter lockup (203),R (251),CLS (219),SLK (171),S clutch is too high. (220),S (221),CLK (209),E (211),SL ([VGS_*])

(230),G (463))

    ETC-Electronic transmission control 2783 The friction power of the (EGS2) (CL (216),M (164),CL (215),C torque converter lockup (203),R (251),CLS (219),SLK (171),S clutch is too high. (220),S (221),CLK (209),E (211),SL ([VGS2_*])

    (230),G (463))

    ETC-Electronic transmission control 0741 Actuation of torque (EGS2) (CL (216),M (164),CL (215),C converter lockup clutch is (203),R (251),CLS (219),SLK (171),S not possible. ([VGS2_*]) (220),S (221),CLK (209),E (211),SL (230),G (463))

零件

    其它零件号 名称 提示 ES1 ES2 EPC 品牌 A XXX Automatic 1 Order number 270 XX transmission 722.9 as per EPC X XX

    A XXX Torque converter 1 Order number 250 XX as per EPC X XX

操作号/损坏代码

    操作损坏代码 提示

    操作内容

     27287D1 Use damage code if predominantly magnetic swarf is

    in oil pan

     27141D1 Use damage code if predominantly non-magnetic swarf is in oil pan

Report this document

For any questions or suggestions please email
cust-service@docsford.com