DOC

Maintenance Inspection The equipment is designed to operate ...

By Regina Chavez,2014-12-07 03:08
10 views 0
Maintenance Inspection The equipment is designed to operate ...

    Maintenance Inspection

    The equipment is designed to operate maintenance free for at least 3 years of continuous operation. The product contains no user serviceable items. When the product does require maintenance please contact the installing contractor. Below is the recommended inspection schedule:

    3 & 6-Month Inspection by Dealer/Operator

     Verify air flow flow meter Rate:___ visual Vigorous Boil Calm (see Annual Inspection)

     Inspect area around Aero-Stream? unit for signs of water puddling

     Inspect/clean cooling grills

     Inspect cord for damage

     Inspect exposed air line for damage

     Inspect filter/clean

    Record remediation progress (tank level, photo of ponding, surfacing, back-ups, etc.)

     Tank Level: _________ Photo of field Evidence of backups

    Notes: ___________________________________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________

12-Month Inspection by Dealer/Operator

     Verify air flow flow meter Rate:___ visual Vigorous Boil Calm (see Annual Inspection)

     Inspect area around Aero-Stream? unit for signs of water puddling

     Inspect/clean cooling grills

     Inspect cord for damage

     Inspect exposed air line for damage

     Inspect filter/clean

    Record remediation progress (tank level, photo of ponding, surfacing, back-ups, etc.)

     Tank Level: _________ Photo of field Evidence of backups

    Notes: ___________________________________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________

    Subsequent 6-Month Inspection by Dealer/Operator or homeowner (response required to installing contractor by fax or e-mail)

     Verify air flow flow meter Rate:___ visual Vigorous Boil Calm (see Annual Inspection)

     Inspect area around Aero-Stream? unit for signs of water puddling

     Inspect/clean cooling grills

     Inspect cord for damage

     Inspect exposed air line for damage

     Inspect filter/clean

    Record remediation progress (tank level, photo of ponding, surfacing, back-ups, etc.)

     Tank Level: _________ Photo of field Evidence of backups

    Notes: ___________________________________________________________________________________________ _________________________________________________________________________________________________ _________________________________________________________________________________________________

    102259 OTS Maintenance Inspection - Complete

Annual Inspection

    1. Remove the inspection cover on the septic tank containing the filters.

    2. Determine if the liquid level in the tank is at the normal level as defined by being within ?” of the bottom of

    the outlet pipe leaving the tank.

    3. Remove filter and observe liquid flow through baffle. If the flow is substantial with the filter removed clean

    or replace filter per the installation guide.

    4. With the aero-Stream? system operating, you should observe a vigorous “boil” in the tank above the

    sintered diffuser (see photo below)

    5. If a vigorous boil is not observed please contact your installing contractor. If the remediation period is complete and you have turned off the equipment you should observe the liquid level in the tank

    as shown in the photo below. The liquid level should be within ?” of the bottom of the outlet pipe leaving the tank or 2” -

    4” below the bottom of the inlet pipe.

    At no time should the liquid level in the tank be more than ?” above the bottom of the inlet or outlet pipe. If the liquid level is elevated, have the tank pumped and contact your installing contractor.

    102259 OTS Maintenance Inspection - Complete

Report this document

For any questions or suggestions please email
cust-service@docsford.com