DOC

yhjMild steel specifications S355olk

By Lois Reed,2014-01-23 08:50
13 views 0
yhjMild steel specifications S355olk

     Page 1/1 Outsourcing

     Mild Steel Specifications.

     S355 Revision 00

    Edited: 2007.11.30 Written by: Martin Egeris Jakobsen

*

    % values for Al Nb V Ti S240 to S700 Min. 0,015 Max 0,09 Max 0,2 Max 015

     2 2. Note: MPa/ mmare the same asN/mm

    C (%) Si. (%) Mn. (%) P (%) S (%) Other (%)

    ? ? ? ? (Al/Nb/V/Ti)

    0,10 0,03(Not important) 1,15(Must be 0,025 0,010(Has to be * more than 1%) low)

    Bendnes Elongation D=bend diameter AP Standard Walloop Tensile strength σ0.2

    2) A absorbation A= test thickness steel grade. 5σ0.2 (MPa/mm2% (Ak/J) (MPa/mm)

    355 430-550 23 27 D=2A

错误;未指定书签。F:\Outsourcing\Make By gruppen\Materiale specifikationer\Mild steel specifications S355.doc

Report this document

For any questions or suggestions please email
cust-service@docsford.com