DOC

Tutorials

By Dan Olson,2014-01-30 13:57
9 views 0
TutorialsTutori

    Quick Tip: Using the Print Booklet Feature in InDesign CS5

    Tutorial Details

    ; Program: InDesign CS5

    ; Difficulty: Intermediate

    ; Estimated Completion Time: 15 minutes

    Tweet

    Sitting at the bottom of the File menu within InDesign is the Print Booklet feature. This feature has the potential to virtually cut out imposition time and for that reason it should not be overlooked. As print machines, paper sizes and ways of working vary I will try to keep this tut as generalised as possible. However the tut will be easier to follow if your design is portrait, saddle stitched(stapled) and contains eight pages or more.

Step 1

    Start by opening your design. If you don’t have one, check my previous tut on how to create one How to Make an A5 Print Ready Leaflet InDesign CS5 or alternatively you can follow this

    link to download a template ready for instant use Elegant A6 Pocket Brochure Template. Note:

    as we are printing a saddle stitched booklet your pagination should be in multiples of four, for example 4, 8, 12, 16 and so on.

Step 2

    Go to File > Print Booklet.

Step 3

Under the Print Preset drop down menu select the printer you intend on using. If you only

have one printer installed it is fine to select Default.

Step 4

Now go to Print Settings

Check that your preferred printer is selected.

Step 5

Move down to Setup and select it. Again double check your paper size, orientation is Landscape,

Scale is 100% and that the Page Position is Centered.

Step 6

Open Marks and Bleed. Add Crop Marks and set the preferred Weight of your crops. For the

purposes of this Tut everything below Marks and Bleed we are going to leave as default.

Step 7

Now open the Printer options.

Select Quality and Media from the drop down menu.

Step 8

    Select the Media Type you are printing on, check the Paper Source is correct and set your Print Quality. My selections are below.

Step 9

    Next open Duplex Printing and Margin. This is where you choose where you want your booklet to be bound. For my design it needs to be Long-side stapling (Left) and it should be for the template I recommended.

Now go ahead and press the Print button to return to the Print menu.

Step 10

    Press OK to return to the Print Booklet menu. To check that your booklet is set up correctly open the Preview section.

Report this document

For any questions or suggestions please email
cust-service@docsford.com