DOC

...RULEMAKING MARICOPA COUNTY AIR POLLUTION CONTROL REGULATIONS

By Harold Gray,2014-12-25 13:15
12 views 0
...RULEMAKING MARICOPA COUNTY AIR POLLUTION CONTROL REGULATIONS

    DRAFT NOTICE OF FINAL RULEMAKING

    MARICOPA COUNTY AIR POLLUTION CONTROL REGULATIONS

    REGULATION III

    RULE 317 HOSPITAL/MEDICAL/INFECTIOUS WASTE INCINERATORS

    RULE 321 MUNICIPAL SOLID WASTE LANDFILLS

    RULE 360 NEW SOURCE PERFORMANCE STANDARDS

    RULE 370 FEDERAL HAZARDOUS AIR POLLUTANT PROGRAM

    RULE 371 ACID RAIN

    PREAMBLE

1. Sections Affected Rulemaking Action

     Rule 317 ? Index Amend

     Rule 317 ? 100 Amend

     Rule 317 ? 200 Amend

     Rule 317 ? 300 Amend

     Rule 321 ? 100 Amend

     Rule 321 ? 300 Amend

     Rule 360 ? Index Amend

     Rule 360 ? 100 Amend

     Rule 360 ? 200 Amend

     Rule 360 ? 300 Amend

     Rule 370 ? Index Amend

     Rule 370 ? 100 Amend

     Rule 370 ? 200 Amend

     Rule 370 ? 300 Amend

     Rule 370 ? 400 Amend

     Rule 370 ? Table I Amend

     Rule 371 ? 100 Amend

     Rule 371 ? 300 Amend

2. The statutory authority for the rulemaking, including both the authorizing statute (general) and the

    statutes the rule is implementing (specific):

     Authorizing statutes: Arizona Revised Statutes (ARS) ? 49-112(A), ? 49-479 and ?49-480

     Implementing Statute: Arizona Revised Statutes (ARS) ? 49-406(G), ? 49-479

3. The effective date of the rules:

    1

     1

     Date of adoption by the Board of Supervisors: March 15, 2006

4. A list of all previous notices appearing in the Register addressing the final rule:

     a. Notice of Rulemaking Docket Opening: 11 A.A.R. 4395, November 4, 2005

     b. Notice of Proposed Rulemaking: 11 A.A.R. 4396, November 4, 2005

    5. The name and address of department personnel with whom persons may communicate regarding the

    rulemaking:

     Name: Hilary R Hartline or Jo Crumbaker, Maricopa County Air Quality Dept.

     Address: 1001 North Central Avenue, Suite # 695, Phoenix, AZ 85004

     Telephone Number: 602-506-3476 or 602-506-6705

     Fax Number: 602-506-6179

     E-Mail Address: hhartline@mail.maricopa.gov or jcrumbak@mail.maricopa.gov

6. An explanation of the rule, including the department's reasons for initiating the rule:

     Maricopa County is updating its incorporations by reference of the following federal regulations: New Source

    Performance Standards (NSPS), National Emission Standards for Hazardous Air Pollutants (NESHAP), and

    Acid Rain as follows:

     Rule 317: 40 CFR 60, Subpart Ec, Standards of Performance for Hospital/Medical/Infectious Waste

    Incinerators for Which Construction is Commenced After June 20, 1996 is incorporated by reference as of July

    1, 2004.

     Rule 321: 40 CFR 60, Subpart WWW, Standards of Performance for Municipal Solid Waste Landfills, is

    incorporated by reference as of July 1, 2004.

     Rule 360: Updates to the federal NSPS regulations at 40 CFR 60 are incorporated as of July 1, 2004.

     Rule 370: Updates to the federal NESHAP regulations at 40 CFR 61 and 40 CFR 63 are incorporated as of

    July 1, 2004.

     Rule 371: Updates to the federal Acid Rain regulations at 40 CFR 72, 74, 75, and 76 are incorporated as of

    July 1, 2004.

     The Maricopa County Air Quality Department will be requesting delegation of authority for enforcement of the

    revisions in Rules 317, 321, 360, 370 and 371 from the U.S. Environmental Protection Agency (EPA).

     A description of the new incorporations by reference, and amendments to the existing incorporations by

    reference, follows:

     40 CFR 60, NSPS

    2

     2

     Part 60, Subpart Kb - Standards of Performance for Volatile Organic Liquid Storage Vessels (Including

    Petroleum Liquid Storage Vessels) for Which Construction, Reconstruction, or Modification Commenced after

    July 23, 1984. [Amended at 68 FR 59328 - 59333, 10/15/03] These final rule amendments were promulgated

    by EPA pursuant to a settlement agreement with the American Forest and Paper Association regarding their

    petition for judicial review of a March 27, 2000 memorandum issued by the EPA. In the March 27, 2000

    memorandum, the EPA stated that process tanks are “storage vessels” under the definition in 40 CFR 60,

    Subpart Kb. These final rule amendments exempt certain storage vessels by capacity and vapor pressure,

    exempts process tanks, and adds the process tank definition. The final rule also amended the performance

    standards to exempt storage vessels that are subject to the National Emission Standards for Hazardous Air

    Pollutants: Solvent Extraction for Vegetable Oil Production.

     Part 60, Subpart Ec - Standards of Performance for Hospital/Medical/Infectious Waste Incinerators for Which

    Construction is Commenced After June 20, 1996. [Corrected at 68 FR 61759, 10/30/03] EPA promulgated

    minor corrections to 40 CFR 60.51c in this correction. Note: Rule 317 also incorporates 40 CFR Subpart Ec by

    reference.

     Part 60, Subpart XX - Standards of Performance for Bulk Gasoline Terminals. [Amended at 68 FR 70960 -

    70966, 12/19/03] These final amendments provide clarification and alternatives to enhance the flexibility of the

    recordkeeping and testing requirements under 40 CFR 60, Subpart XX.

     40 CFR 61, NESHAP

     Part 61, Subpart M - National Emission Standard for Asbestos. [Amended & Direct final rule at 68 FR 54790

    - 54793, 9/18/03] In this action, the EPA amended the citation for labeling containers of asbestos waste

    materials based on requirements in the Occupational Safety and Health Administration (OSHA) asbestos

    standard for the construction industry for proper labeling of asbestos waste. The amendment was made to

    correctly cite the appropriate numbering of the provisions in the OSHA regulations.

     Part 61, Subpart FF - National Emission Standard for Benzene Waste Operations. [Amended & Direct final

    rule at 67 FR 68526 - 68533, 11/12/02; Partially withdrawn at 68 FR 6082, 2/6/03; Amended at 68 FR 67932 -

    67936, 12/4/03] In the first rulemaking, the EPA amended the NESHAP for benzene waste operations by

    adding an exemption for organic vapors routed to the fuel gas system, and also adding a new compliance option

    for tanks. The EPA also clarified the standards for containers. In the second rulemaking, the EPA withdrew

    part of the direct final rule promulgated on 11/12/02 due to adverse comments received. In the third rulemaking,

    the EPA addressed the adverse comments received and corrected a cross-reference error.

     40 CFR 63, NESHAP

    3

     3

     Part 63, Subpart A - General Provisions. Part 63, Subpart B - Requirements for Control Technology

    Determinations for Major Sources in Accordance with Clean Air Act Sections, Sections 112(g) and 112(j). [Final rule, amendments; 68 FR 32586 - 32603, 5/30/03] These final rule amendments establish a new timetable for the submission of section 112(j) Part 2 applications, and modify the content requirements for Part 2 applications. These final rule amendments also established revised procedures for requests for applicability determination previously submitted under the section 112(j) rule, and for section 112(j) applications submitted by sources that previously obtained a case-by-case determination under Clean Air Act (CAA) section 112(g). These final rule amendments also adopt various amendments to the NESHAP General Provisions governing startup, shutdown, and malfunction plans, some of which were proposed by EPA pursuant to a settlement agreement in a judicial action.

     Part 63, Subpart C - List of Hazardous Air Pollutants, Petitions Process, Lesser Quantity Designations, Source Category List. [Added at 61 FR 30816 - 30823, 6/18/96; 65 FR 47342 - 47348, 08/2/00; 69 FR 69320 - 69325, 11/29/04] These three separate rulemakings removed or modified substances from the list of Hazardous Air Pollutants (HAP) in Section 112(b)(1) of the CAA. The first rulemaking removed caprolactam from the HAP list in response to a petition EPA received from AlliedSignal, Inc., BASF Corporation, and DSM Chemicals North America. The second rulemaking revised the definition of glycol ethers to exclude each individual compound in a group called the surfactant alcohol ethoxylates and their derivatives (SAED) from the glycol ethers category in the list of HAP. The rulemaking was issued by the EPA in response to an analysis of potential exposure and hazards of SAED that was prepared by the Soap and Detergent Association. The third rulemaking removed the compound ethylene glycol monobutyl ether (EGBE) (2-Butoxyethanol) from the group of glycol ethers in the HAP list. This action was taken in response to a petition to delete the substance submitted by the Ethylene Glycol Ethers Panel of the American Chemistry Council (formerly the Chemical Manufacturers Association) on behalf of EGBE producers and consumers.

     Special note on EGBE: Although this chemical was removed from the federal HAP list in the November 29, 2004 rule, several of the EPA actions below preceded this removal and list EGBE as a HAP emitted.

     Part 63, Subpart J - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers Production. [Added at 67 FR 45886 - 45893, 7/10/02] In this action, EPA promulgated NESHAP

    for the Polyvinyl Chloride (PVC) and Copolymers Production source category. In this rule, EPA requires that new sources with equipment leaks must comply with the most current technology standards in the Generic maximum achievable control technology (MACT) rule.

     Part 63, Subpart MM - National Emission Standards for Hazardous Air Pollutants for Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp Mills. [Direct Final Rule amendments 68 FR 7706 - 7718, 2/18/03] In the February 18, 2003 ruling, EPA took direct final action on

    amendments to the NESHAP for chemical recovery combustion sources at kraft, soda, sulfite, and stand-alone

    4

     4

    semichemical pulp mills, which were issued on January 12, 2001. The amendments clarify and consolidate the monitoring and testing requirements and add a site-specific alternative standard for one pulp mill. [Final rule amendments 68 FR 42603 - 42605, 7/18/03] In the July 18, 2003 rule, EPA amended Part 63, Subpart MM by deleting provisions which were the subject of adverse comments from the February 18, 2003 final rule. EPA also made minor corrections to Part 63, Subpart MM. [Final rule technical corrections 68 FR 67953 - 67955, 12/5/03] In the December 5, 2003 final rule, EPA restored provisions which were inadvertently deleted by the 7/18/03 amendments and restored a provision which was inadvertently omitted from the 1/12/01 final rule. [Final rule technical corrections 69 FR 25321 - 25324, 5/6/04] In the May 6, 2004 final rule, EPA corrected several cross-references in Part 63, Subpart MM in order to be consistent with the text shifts made in the February 18, 2003 amendments.

     Part 63, Subpart SS - National Emission Standards for Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel Gas System or a Process; Part 63, Subpart TT - National Emission Standards

    for Equipment Leaks - Control Level 1; Part 63, Subpart UU - National Emission Standards for Equipment

    Leaks - Control Level 2 Standards; Part 63, Subpart WW - National Emission Standards for Storage Vessels

    (Tanks) - Control Level 2; Part 63, Subpart XX - National Emission Standards for Ethylene Manufacturing

    Process Units: Heat Exchange Systems and Waste Operations; Part 63, Subpart YY - National Emission

    Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology Standards. [Added and Revised at 67 FR 46258 - 46289, 7/12/02] This action added NESHAPs for four additional source categories: Cyanide Chemicals Manufacturing, Carbon Black Production, Ethylene Production, and Spandex Production. EPA identified these four source categories as major sources of hazardous air pollutants (HAP), including cyanide compounds, acrylonitrile, acetonitrile, carbonyl sulfide, carbon disulfide, benzene, 1,3-butadiene, toluene, and 2,4-toluene diisocyanate (TDI). These standards implement section 112(d) of the Clean Air Act (CAA) by requiring all major sources to meet HAP emission standards reflecting the application of MACT. This action also promulgated NESHAP for the heat exchange systems and wastewater operations at ethylene manufacturing facilities. The EPA has also amended Part 63,

    Subpart YY in direct final rule amendments published at 67 FR 46289 - 46293, 7/12/02. This latter action amends the "generic" MACT standards to clarify EPA's intent concerning dry spinning spandex production processes. The EPA has also amended Part 63, Subpart XX in final rule amendments published at 68 FR

    70960 - 70966, 12/19/03 (Note: This latter final rule also amends Part 63, Subpart R).

     Part 63, Subpart EEE - National Emission Standards for Hazardous Air Pollutants from Hazardous Waste Combustors. [Technical Correction 67 FR 77687 - 77692, 12/19/02] In this action, EPA corrected technical errors in 40 CFR 63, Subpart EEE.

    5

     5

     Part 63, Subpart JJJ - National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins. [Correction 69 FR 31008, 6/2/04] EPA has corrected 40 CFR Part 63, Subpart JJJ in this rulemaking.

     Part 63, Subpart LLL - National Emission Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing Industry. [Partial withdrawal of direct final rule 67 FR 44371 - 44372, 7/2/02] On April 5, 2002, the EPA promulgated amendments to the NESHAP for the portland cement manufacturing industry as a direct final rule. EPA has withdrawn the corresponding parts of that direct final rule for which adverse comments were received. [Final rule; clarifications and correction 67 FR 44766 - 44769, 7/5/02] The action on July 5, 2002 corrects requirements for the portland cement manufacturing industry that were published in the 4/5/02 Federal Register. [Final rule amendments 67 FR 72580 - 72585, 12/6/02] In the December 6, 2002 final rule, EPA took final action on certain amendments to the NESHAP for the portland cement manufacturing industry. These amendments make improvements to the implementation of the emission standards, primarily in the areas of applicability, testing, and monitoring where issues and questions were raised since promulgation of the rule.

     Part 63, Subpart MMM - National Emission Standards for Hazardous Air Pollutants for Pesticide Active Ingredient Production. [Final Rule 67 FR 59336 - 59356, 9/30/02] In this 9/30/02 final rule, EPA took final action on amendments proposed on 4/10/02 and corrected inconsistencies that have been discovered since EPA originally promulgated the rule.

     Part 63, Subpart QQQ - National Emission Standards for Hazardous Air Pollutants for Primary Copper Smelting. [Added at 67 FR 40478 - 40506, 6/12/02] This action promulgated NESHAP for primary copper smelting. Primary copper smelters can potentially emit significant amounts of certain toxic metals listed as HAP under CAA section 112(b)(1), including antimony, arsenic, beryllium, cadmium, cobalt, lead, manganese, nickel and selenium. This final rule established emissions limitations and work practice standards for primary copper smelters that are (or a part of) a major source of HAP emissions and that use batch copper converters. The standards reflect the application of MACT.

     Part 63, Subpart RRR - National Emission Standards for Hazardous Air Pollutants for Secondary Aluminum Production. [Withdrawal of direct final rule 67 FR 52616 - 52617, 8/13/02] On June 14, 2002, the EPA promulgated amendments to the NESHAP for the secondary aluminum production industry as a direct final rule. In this action, EPA has withdrawn the entire direct final rule due to adverse comments received. [Amended at 67 FR 59787 - 59793, 9/24/02] In the September 24, 2002 action, EPA promulgated final amendments to the NESHAP for the secondary aluminum production industry based on the June 14, 2002 proposal. [Corrected at 67 FR 68038, 11/8/02] In the November 8, 2002 final action, EPA corrected effective dates for the NESHAPs. [Amended at 67 FR 79808 - 79819, 12/30/02] The December 30, 2002 action amended the applicability provisions for aluminum die casters, foundries, and extruders. The amendments also added new provisions

    6

     6

    governing control of commonly-ducted units; revised the procedures for adoption of operation, maintenance, and monitoring plans; revised the criteria concerning testing of representative emission units; revised the standard for unvented in-line flux boxes; and clarified the control requirements for sidewell furnaces. These changes were made pursuant to settlement agreements in two cases.

     Part 63, Subpart VVV - National Emission Standards for Hazardous Air Pollutants: Publicly Owned Treatment Works. [Final rule amendments 67 FR 64742 - 64746, 10/21/02] In this action, EPA promulgated amendments which were proposed pursuant to a settlement agreement regarding a petition for judicial review of the publicly owned treatment works NESHAP.

     Part 63, Subpart EEEE - National Emission Standards for Hazardous Air Pollutants: Organic Liquids Distribution (Non-Gasoline). [Added at 69 FR 5038 - 5087, 2/3/04] This final rule promulgated NESHAP for new and existing organic liquids distribution (non-gasoline) operations, which are carried out at storage terminals, refineries, crude oil pipeline stations, and various manufacturing facilities. The most prevalent organic HAP emitted nationwide from these operations are benzene, ethylbenzene, toluene, vinyl chloride, and xylenes. These NESHAP implement section 112(d) of the CAA by requiring the application of MACT for plant sites that are major sources.

     Part 63, Subpart FFFF - National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing. [Added at 68 FR 63852 - 63911, 11/10/03] In this action, EPA promulgated NESHAP for miscellaneous organic chemical manufacturing facilities. The final rule established emission limits and work practice standards for new and existing miscellaneous organic chemical manufacturing process units, wastewater treatment and conveyance systems, transfer operations, and associated ancillary equipment. The HAP emitted from miscellaneous organic chemical manufacturing facilities include toluene, methanol, xylene, hydrogen chloride, and methylene chloride. The standards reflect the application of MACT.

     Part 63, Subpart IIII - National Emission Standards for Hazardous Air Pollutants: Surface Coating of Automobiles and Light-Duty Trucks. [Added at 69 FR 22602 - 22661, 4/26/04] This final rule promulgates NESHAP for automobile and light-duty truck surface coating operations located at major sources of HAP. The primary HAP emitted by these operations are toluene, xylene, glycol ethers, methyl ethyl ketone, methyl isobutyl ketone, ethylbenzene, and methanol. These NESHAP implement section 112(d) of the CAA by requiring the application of MACT. This action also amends the Surface Coating of Miscellaneous Metal Parts and Products NESHAP (40 CFR part 63, subpart MMMM) and the Surface Coating of Plastic Parts and Products NESHAP (40 CFR part 63, subpart PPPP) to clarify the interaction between these rules and this NESHAP.

    7

     7

     Part 63, Subpart JJJJ - National Emission Standards for Hazardous Air Pollutants: Paper and Other Web Coating. [Added at 67 FR 72330 - 72362, 12/4/02] This action finalizes NESHAP for facilities that coat paper and other web substrates and are major sources of HAP emissions. The standards implement section 112(d) of the CAA to protect public health and the environment by reducing HAP emissions from new and existing facilities.

     Part 63, Subpart KKKK - National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans. [Added at 68 FR 64432 - 64480, 11/13/03] In this final rule, EPA promulgated NESHAP for metal can surface coating operations located at major sources of HAP. The HAP emitted by these facilities include ethylene glycol monobutyl ether and other glycol ethers, xylenes, hexane, methyl isobutyl ketone, and methyl ethyl ketone. The final standards implement section 112(d) of the CAA by requiring the application of MACT.

     Part 63, Subpart MMMM - National Emission Standards for Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts and Products. [Added at 69 FR 130 - 192, 1/2/04] This action finalizes NESHAP for miscellaneous metal parts and products surface coating operations located at major sources of HAP. The final rule will protect air quality and promote the public health by reducing emissions of HAP from facilities in the miscellaneous metal parts and products surface coating source category. The organic HAP emitted by these operations include xylenes, toluene, methyl ethyl ketone, phenol, cresols/cresylic acid, glycol ethers, styrene, methyl isobutyl ketone, and ethyl benzene. The standards reflect the application of MACT.

     Part 63, Subpart NNNN - National Emission Standards for Hazardous Air Pollutants: Surface Coating of Large Appliances. [Added at 67 FR 48254 - 48288, 7/23/02] This final rule promulgated NESHAP for existing and new facilities that apply surface coatings to large appliances. The intent of the standards is to protect the public by requiring new and existing major sources to control emissions with the implementation of MACT. The HAP typically emitted by these sources include glycol ethers, methylene diphenyl diisocyanate, methyl ethyl ketone, toluene, and xylene.

     Part 63, Subpart OOOO - National Emission Standards for Hazardous Air Pollutants: Printing, Coating, and Dyeing of Fabrics and Other Textiles. [Added at 68 FR 32172 - 32229, 5/29/03] In this final rule, EPA promulgated NESHAP for existing and new fabric and other textile coating, printing, slashing, dyeing and finishing operations. The final standards implement section 112(d) of the CAA by requiring all major sources to meet the HAP emission standards reflecting the application of the MACT. The principal HAP emitted by these sources include toluene, methyl ethyl ketone, methanol, xylenes, methyl isobutyl ketone, methylene chloride, trichloroethylene, n-hexane, glycol ethers, and formaldehyde.

    8

     8

     Part 69, Subpart PPPP - National Emission Standards for Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products. [Added at 69 FR 20968 - 21022, 4/19/04 and amended at 69 FR 22602 - 22661, 4/26/04] This action promulgates NESHAP for plastic parts and products surface coating operations located at major sources of HAP. The final rule will protect air quality and promote the public health by reducing emissions of HAP from these facilities and requiring the application of MACT. The organic HAP emitted by these operations include methyl ethyl ketone, methyl isobutyl ketone, toluene, ethylene glycol monobutyl ether and other glycol ethers, and xylenes.

     Part 63, Subpart QQQQ - National Emission Standards for Hazardous Air Pollutants: Surface Coating of Wood Building Products. [Added at 68 FR 31746 - 31788, 5/28/03] This final rule promulgated NESHAP for wood building products surface coating operations. The final standards establish emission limitations, operating limits and work practice requirements for all major sources that apply a surface coating to a wood building product. Wood building products surface coating operations emit several HAP, including xylenes, toluene, ethyl benzene, ethylene glycol monobutyl ether, other glycol ethers, methyl ethyl ketone, methyl isobutyl ketone, methanol, styrene and formaldehyde. The standards reflect the application of MACT.

     Part 63, Subpart RRRR - National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Furniture. [Added at 68 FR 28606 - 28646, 5/23/03] In this final rule, the EPA promulgated NESHAP for new and existing metal furniture surface coating operations located at major sources of HAP emissions. Metal furniture surface coating operations emit HAPs such as xylene, toluene, ethylene glycol monobutyl ether and other glycol ethers, ethylbenzene, and methyl ethyl ketone. The final standards implement section 112(d) of the CAA by requiring the application of MACT.

     Part 63, Subpart SSSS - National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Coil. [Final rule technical correction 68 FR 12590 - 12592, 3/17/03] On June 10, 2002, EPA issued NESHAP for the surface coating of metal coil. This action corrected the timeline for beginning the first semiannual reporting period and submitting the first semiannual report as published in the NESHAP.

     Part 63, Subpart VVVV - National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing. [Added at 66 FR 44218 - 44250, 8/22/01] This final rule promulgated NESHAP for new and existing boat manufacturing facilities. The processes regulated include fiberglass resin and gel coat operations, carpet and fabric adhesive operations, and aluminum recreational boat painting operations. The EPA has identified boat manufacturing as a major source of HAP, such as styrene, methyl methacrylate, methylene chloride, toluene, xylene, n-hexane, methyl ethyl ketone, methyl isobutyl ketone, and methyl chloroform. The standards reflect the application of MACT.

    9

     9

     Part 63, Subpart WWWW - National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production. [Added at 68 FR 19375 - 19443, 4/21/03] In this final rule, EPA promulgated NESHAP for new and existing reinforced plastic composites production facilities. The NESHAP regulate production and ancillary processes used to manufacture products with thermoset resins and gel coats. Reinforced plastic composites production facilities emit HAP such as styrene, methyl methacrylate, and methylene chloride. The final standards implement section 112(d) of the CAA by requiring the application of MACT.

     Part 63, Subpart XXXX - National Emission Standards for Hazardous Air Pollutants: Rubber Tire

    Manufacturing. [Added at 67 FR 45588 - 45625, 7/9/02] This final rule promulgated NESHAP for new and existing sources at rubber tire manufacturing facilities. The EPA has identified rubber tire manufacturing facilities as major sources of HAP emissions. The primary HAP that will be controlled with the application of MACT in this action include toluene and hexane. [Final rule technical correction, 68 FR 11745 - 11747, 3/12/03] This action corrected errors and clarified regulatory text of the NESHAP for rubber tire manufacturing which was issued as a final rule on July 9, 2002.

     Part 63, Subpart YYYY - National Emission Standards for Hazardous Air Pollutants for Stationary

    Combustion Turbines. [Added at 69 FR 10512 - 10548, 3/5/04] This action promulgated NESHAP for stationary combustion turbines. The EPA has identified stationary combustion turbines as major sources of HAP emissions, such as formaldehyde, toluene, benzene, and acetaldehyde. In the final NESHAP, EPA has divided the stationary combustion turbine category into eight subcategories. EPA has also adopted a final emission standard requiring control of formaldehyde emissions for all new or reconstructed stationary combustion turbines in the four lean premix diffusion flame subcategories. The standards reflect the application of MACT.

     Part 63, Subpart ZZZZ - National Emission Standards for Hazardous Air Pollutants for Stationary

    Reciprocating Internal Combustion Engines. [Added at 69 FR 33474 - 33522, 6/15/04] This final rule promulgated NESHAP for stationary reciprocating internal combustion engines with a site-rating of more than 500 brake horsepower. The EPA has identified stationary reciprocating internal combustion engines as major sources of HAP emissions such as formaldehyde, acrolein, methanol, and acetaldehyde. The final standards implement section 112(d) of the CAA by requiring the application of MACT.

     Part 63, Subpart AAAAA - National Emission Standards for Hazardous Air Pollutants for Lime

    Manufacturing Plants. [Added at 69 FR 394 - 433, 1/5/04] This action promulgated NESHAP for the lime manufacturing source category. The lime manufacturing emission units regulated will include lime kilns, lime coolers, and various types of processed stone handling operations. The EPA has identified the lime manufacturing industry as a major source of HAP emissions including, but not limited to, hydrogen chloride,

    10

     10

Report this document

For any questions or suggestions please email
cust-service@docsford.com