Marker Rendering by Michele Leonello

By Joann Riley,2014-03-24 12:22
9 views 0
Marker Rendering by Michele Leonello

Posted by Jason WhiteOn May - 1 - 2010

    As promised, we have a special treat: A first class marker tutorial by Michele Leonello. First, a bit of background on Mr. Leonello: Hes 28 years old and has worked the past six years at

    Centro Stile Alfa Romeo in Milan. He was a project team member on the MiTo and the Juliet. Today, hes a freelance designer and teaches Trans Design at the Politecnico di Milano. See

    Micheles tutorial after the jump.

To create this tutorial, I used an A3-sized Copic marker pad. The

    sketch itself was made with STABILO ORIGINAL pencils, along with a range of COOL GREY and RED Copic Markers. In the end, to

    obtain the effect of reflected light, I used a white pencil and a white china marker.

    The first phase of work involves the development of the idea. To perform the technique that I am demonstrating, youll need to use STABILO ORIGINAL pencils. These pencils are unique in that after several marker passes, the graphite is not lost.

    It is very important to decide first which perspective will best present your idea. In this case it is better to pause occasionally, analyze and stand different distances from the sketch to see if there are errors. Remember, we are human beings, not robots, so we can all make mistakes even

those who have been designers for many years.

    Next is the development phase of the sketch, which includes defining the axles, the wheels and the architecture of the vehicle. After clearly defining our volumes and proportions we can develop the graphics and details that enrich our design.

    Now, we start with the color phase. Since this is a Ferrari, I think the most suitable color is red. Ive got a range of red Copics from R11 R02 R08 R24 R59 for the bodywork, while for the

    shadows and the darkest point, I have a range of COOL GREY, C2 C5 C7 and Black 110.

    It is not necessary to use a whole range of any color Copic for achieving good results and reflections. Remember that with Copics, a single color can have 4 different gradations.

Always start by laying in the shadows first, then go to the body.

    For the red, start from the lighter tone, then climb to the darkest. To get a good mix and gradation of colors, you must be very fast in applying the R08 secondary color and then dilute it with the primary R11 to obtain a gradient from dark to light.

After completing the application of color, remember to pay special attention to graphics and details,

such as headlights, grilles, wheels, mirrors. Use a black ballpoint pen and white pencils.

    Now the sketch is finished. As I mentioned before, the result may be satisfactory, or it might be good, but we can rectify the errors. I too have made mistakes, and I try to remove them with a brief use of Photoshop. I hope this brief tutorial will help students understand how to achieve this kind of work.

    For more info and details, visit or contact

Report this document

For any questions or suggestions please email