DOC

CompositionInformation

By Rebecca Price,2014-12-11 11:54
6 views 0
CompositionInformation

    Tetra Acetyl Ethylene Diamine(MSDS) 1. Chemical Product and Supplier Identification

    Product Name

    ? Tetra Acetyl Ethylene Diamine

    Synonyms

    ? TAED

    Manufacturer

    ? JIANGXI YONGTAI CHEMICAL CO., LTD.

    ? West Zone, Scientific and Industrial Park, Luxi County, Pingxiang City, Jiangxi

    Province, China.

    ? Tel: +86 799 7586939 / 7586358 Fax: +86 799 7586721 MSDS Number

    ? YTTAED-01-01

    2. Composition/Information on Ingredients

    Ingredients Chemical Formula CAS No. Percentage

    Tetra Acetyl Ethylene Diamine C10H16O4N2 10543-57-4 92~94

    3. Hazards Identification

    Potential Health Effects

    ? Inhalation………….….May cause nose, throat, and respiratory irritation.

    ? Eye contact…………...May cause irritation.

    ? Skin contact……….… May cause skin irritation..

    ? Ingestion……………...May cause irritation of the digestive tract.

    4. First-aid Measures

    ? Inhalation……………..Remove affected person to fresh air. Seek medical attention

    if effects persist.

    ? Eye contact…………...Flush eyes with running water for at least 15 minutes with

    eyelids held open. Seek specialist advice. ? Skin contact…………..Wash affected skin with soap and mild detergent and large

    amounts of water.

    ? Ingestion……………...If the person is conscious and not convulsing, give 2-4

    cupfuls of water to dilute the chemical and seek medical

    attention immediately. Do not inducing vomiting. 5. Fire Fighting Measure

    Flash Point

    ? Not applicable

    Flammability

    ? Not applicable

    Ignition Temperature

    ? Not applicable

    Danger of Explosion

    ? Non-explosive

     1

Add:West Zone,Scientific and Industrial Park,Luxi County,Pingxiang City,Jiangxi Province,China.

    Tel: +86 799 7586939 / 7586358

    Fax: +86 799 7586721

Extinguishing Media

    Water, Carbon Dioxide

    Fire Hazards

    Will burn to give acetic acid and cyclic amine tars initially. Further heating or combustion will give carbon dioxide and nitrogen oxide.

    Fire-Fighting Measures

    Evacuate all non-essential personnel

    Wear protective clothing and self-contained breathing apparatus

    Remain upwind of fire to avoid hazardous vapors and decomposition products Use water spray to cool fire-exposed containers

    6. Accidental Release Measures

    Spill Clean-up Procedures

    Eliminate all sources of ignition. Evacuate unprotected personnel from equipment recommendations found in Section 8. Never exceed any occupational exposure limit. Sweep up material and place in a disposal container.

    Flush remaining area with water to remove trace residue and dispose of properly. Notify authorities if entry occurs.

    7. Handling and Storage

    Storage

    Store in a cool, dry, well ventilated area away from all source of ignition and out of direct sunlight.

    Keep away from incompatible materials. Keep containers tightly closed. Do not store in unlabeled or mislabeled containers. Never return unused product to storage container. Protect from moisture. Keep containers well sealed.

    Handling

    Avoid contact with eyes, skin.. Use with adequate ventilation.

    Do not swallow. Avoid breathing vapors, mists, or dust. Do not eat, drink, or smoke in work area.

    Prevent contact with combustible or organic materials.

    Label containers and keep them tightly closed when not in use.

    Wash thoroughly after handling.

    8. Exposure Controls/Personal Protection

    Engineering Controls

    General room ventilation is required. Local exhaust ventilation, process enclosures or other engineers controls may be needed to maintain airborne levels below recommended exposure limits. Avoid creating dust or mist. Maintain adequate ventilation. Do not use in closed or confined spaces. Keep levels below exposure limits. To determine exposure levels,monitoring should be performed regularly.

    Respiratory Protection

    For many conditions, no respiratory protection may be needed; however, in dusty or unknown atmospheres or when exposures exceed limit values, wear a NIOSH approved respirator.

    Eye/Face Protection

    Wear chemical safety goggles and a full face shield while handling this product.

     2

    Add:West Zone,Scientific and Industrial Park,Luxi County,Pingxiang City,Jiangxi Province,China. Tel: +86 799 7586939 / 7586358

    Fax: +86 799 7586721

Skin Protection

    Prevent contact with this product. Wear gloves and protective clothing depending on

    condition of use.

    Other Protective Equipment

    Eye-wash station

    Safety shower

    Impervious clothing

    Rubber boots

    General Hygiene Considerations

    Wash with soap and water before meal times and at the end of each work shift. Good

    manufacturing practices require gross amounts of any chemical be removed from skin as

    soon as practical, especially before eating or smoking. 9. Physical and Chemical Properties

    Appearance: White or color granules Odor: Weak acetic odor Bulk Density: 420~750 g/L

    PH, 3% Solution: 5

    Solubility: Not available

    Auto Ignition Temperature: 425?C

    10. Stability and Reactivity

    Stability

    Stable at normal storage and handling conditions. Conditions to Avoid

    Acids

    Strong alkalies

    Strong oxidizing agents

    Hazardous Decomposition Products

    None

    11. Toxicological Information

    LD50 Oral: Min. 2000 mg/kg, rat

    LD50 Dermal: No data available

    LD50 Inhalation: No data available

    12. Ecological Information

    COD value: 940MGO2/G(discharge method)

    Biodegradability under OECD guidelines: classified as ultimately biodegradable

    13. Disposal Considerations

    Waste Treatment

    Dispose of in an approved waste facility operated by an authorized contractor in

    compliance with local regulations.

    Package Treatment

    ? The empty and clean containers are to be recycled or disposed of in conformity with

    local regulations.

    14. Transport Information

    Proper Shipping Name: Tetra Acetyl Ethylene Diamine

     3

Add:West Zone,Scientific and Industrial Park,Luxi County,Pingxiang City,Jiangxi Province,China.

    Tel: +86 799 7586939 / 7586358

    Fax: +86 799 7586721

UN Number: Not applicable

    Hazard Class: Not regulated

    Labels: No information available

    Packing Group: 0

    15. Regulatory Information

    SARA Section……………….…….. No

    SARA (313) Chemicals……………. No

    EPA TSCA Inventory…………… . No

    Canadian WHMIS Classification….. D2B

    Canadian DSL……………………... Appears

    EINECS Inventory…………………. No

16. Other Information

    Disclaimer

    ? The data in this Material Safety Data Sheet is believed to be correct. However, since conditions of use are outside our control it should not taken as a warranty of presentation for which Shangyu Jiehua Chemical Co., Ltd. assumes legal responsibility. This information is provided solely for your consideration, investigation, and verification.

     4

    Add:West Zone,Scientific and Industrial Park,Luxi County,Pingxiang City,Jiangxi Province,China. Tel: +86 799 7586939 / 7586358

    Fax: +86 799 7586721

Report this document

For any questions or suggestions please email
cust-service@docsford.com