Emei producing Coptis trace elements
【Abstract】 Objective To Emei producing Coptis primary form of trace elements and heavy metals analysis. Methods using flame atomic absorption spectrometry determination of berberine in the Cu, Fe, Cr, Mn, Zn, Pb, Ca, Mg content, and its in the water decoction of the dissolution rate was studied. Results Coptis Ca, Mg content of the highest, while rich in Fe, Mn, and Zn, and Mg, Zn, Mn has a high dissolution rate; although higher concentrations of heavy metals Pb, but
the content is soluble in rarely. Conclusions for further research on trace elements and the relationship between the efficacy of Chinese medicine to provide a reference.
Key words berberine; trace elements; speciation analysis
Study on the Trace Elements of Emei Coptis chinensis
Abstract: ObjectiveTo analyse the primary speciation of trace elements and heavy metals in Emei Coptis chinensis. MethodsAtomic absorption spectrophotometry was used to determine the contents of Cu, Fe, Cr, Mn, Zn, Pb, Ca, Mg in Coptis chinensis, and their solution rates in decoction were also studied. ResultsCa, Mg had the highest contents in Emei Coptis chinensis, Fe, Mn and Zn were rich and the dissolution rates of Mg, Zn and Mn were higher than the other elements.
Although contents of the heavy metal Pb was high, the dissolvable state was poor. ConclusionThe reference information for further study the relationship between the trace element and the efficacy of the traditional Chinese medicine has been provided.
Key words: Coptis chinensis; Trace element; Analysis of primary speciation
For the Ranunculaceae Coptis Coptis plant Coptis chinensis Franch, Coptis deltoides Coptis deltoidea CY Cheng et Hsiao, Coptis Coptis teetoides CY Cheng, Yunnan Emei wild,
or even Coptis omeiensis (Chen) CY Cheng roots. Xi, respectively referred to as "flavor with" "Yaren" "Cloud connected" and "Pteris company." Coptis produced in Sichuan are collectively referred to as River berberine, for authentic
herbs, which taste even better quality and elegance even better, Pteris even the best cloud even less than the quality of Coptis River.
Coptis is a heat dampness medicine. Modern
pharmacological studies have shown that berberine on bacteria, fungi and virus are better antagonism. In recent years, Coptis anticancer, hypoglycemic, regulate immune function, improve cardiovascular function, lowering blood pressure, anti-
platelet aggregation and other effects are uncovered .
Coptis the main chemical ingredient of the original
berberine-type alkaloids have been isolated alkaloids are berberine, palmatine, coptisine, methyl coptisine, jatrorrhizine, wood and other blue-alkali, acid ingredient A
Wei acid, chlorogenic acid and so on.
In recent years, traditional Chinese medicine active ingredients in the inorganic trace elements are more and more attention. FANG Qing-mao et al  The AAS determination of the soil and the cultivation of Coptis As, Pb, Cr, Hg and other elements of content relations. Wang Xiaoyi, etc.  The HR ICP MS Determination of the Coptis detoxifying with heat-related Mg, Zn, Mn, Ca content, simultaneous
determination of 16 kinds of rare earth elements in health medicine. Rui Tang et al  The ICP AES Determination of
berberine in the six kinds of heat-clearing and detoxifying
effects are considered to be relevant to the content of trace elements.
In this study, the main origin Emei use Coptis Coptis produced as the research object, using flame atomic absorption
spectrometry determination of some trace elements and heavy metals and study of the trace elements and heavy metals in
primary form, for further study of trace elements and traditional Chinese medicine the relationship between the efficacy of reference.
An apparatus and materials
361MC-type atomic absorption spectrophotometer (Shanghai
Precision Scientific Instrument Co., Ltd.); DHG 9240A blast
electric oven thermostat (Shanghai Experimental Equipment Co., Ltd. Jing Wang); DL 1-purpose furnace (Beijing Zhongxing Albert Instrument Co., Ltd.); Electronic Analytical Balance.
Deionized water (18.2 MΩ * cm-1); hydrogen peroxide
(excellent grade pure Tianjin Dongfang Chemical Plant); perchlorate (excellent grade pure Chengdu Chemical Reagent Factory); nitric acid (excellent grade pure Chengdu Chemical
Reagent Factory); Cu, Fe, Cr, Mn, Zn, Pb, Ca, Mg standard stock solution (1000 μg / ml, preparation of the required use concentration).
Coptis (produced in Sichuan Emei Sichuan Lord, an associate professor from the SONG Liang-identified as 4-year-
flavored with Coptis chinensis Franch.); 0.45 μm membrane.
2.1 Sample Preparation Rinse after berberine herbs, and then deionized water, washed three times, placed in drying oven, 65 ? drying 6 h, cooled grinding, over 40 mesh sieve,
was the original drug sample A.
Weigh accurately 25 g of the original drug sample A, with 250ml deionized water, soaked 1 h, boiling 40 min, four-layer
gauze filtration, were first boiled liquid residue B and C; coupled with de-ionized water to boiling residue B 20 min,
filtered after that residue D and 2 decoction E; to C & E mix, with 0.45 μm membrane filter, to isolate soluble F,
particulate matter G. Reposted elsewhere in the paper for free download http://
, heated to dissolve residue, after cooling constant
volume to 25 ml, prepare inspection. And then take samples of 40ml soluble F, concentrated to about 20 ml, add 20 ml HNO3-
HClO4 mixed acid (1:5) according to the aforementioned method of digestion and is scheduled to allow to 25 ml, prepare
2.2 The analysis of samples by atomic absorption spectrophotometry, working conditions in Table 1. Detection of trace elements in Table 1 conditions (abbreviated)
DUT eight kinds of trace elements to take the standard stock solution, prepared a standard series of solutions to measure the absorbance of standard solution, to be working curve. The regression equation of each element and the correlation coefficient in Table 2. Table 2 The regression equation and correlation coefficient (abbreviated)
According to working conditions, using atomic absorption spectrophotometry inspection of all prepared solution of trace elements at the same time make a blank correction.