; Sizes from 1/2 to 3 inches with internal BSPT
; Equal percentage or linear flow characteristics. ; Field configurable for normally open or normally
closed fail-safe position.
; Removable manual operating handle to control valve
during installation or in an event of power failure. ; ANSI Class IV seat leakage specification (0.01% of CV).
; Choice of four, factory-installed actuation control
schemes: Floating, Modulating (2-10 V), Spring Return
2-Position, Spring Return Modulating/Floating.
; Optional NEMA 3R (IP54) rated enclosure for outdoor
; Actuator can be mounted on the valve in any of four
APPLICATION V600A (Two-way) The V600A Two-Way and the V600C Three-Way Control
Ball Valves control hot and chilled water with glycol ; Wide CV choices from 0.38 to 266. solutions up to 50% in heating, ventilating, and air
; Nickel-chrome plated brass conditioning (HVAC) systems to provide two-position or
These valve assemblies can be ordered with or V600C (Three-way) without factory-mounted non-spring return or ; Wide CV choices from 0.33 to 109. spring return direct-coupled actuators (DCA).
; Valve installs in a globe valve .T. pattern, no extra
elbows or piping required. ; Nickel-chrome plated brass valve ball and stem.
; Mixing or Diverting control.
th6670 185 Avenue Northeast, Redmond, WA 98052 USA. Tel: 425.869.8400. Fax: 425.869.8445. www.alerton.com XXXX Rev.001 1 of 4
SPECIFICATIONS Models: See Table 4. Maximum Differential Pressure: See Table 7. Dimensions: See Fig. 1 and 2. Flow Characteristics: Body Style: Two-way ball valve, straight-through flow, full Two-way: Equal Percentage with flow control insert. or Linear with full port. reduced port using patented flow control insert. Three-way: Port A to AB: Equal Percentage. Three-way ball valve, A-B-AB flow, full or reduced port Port B to AB: Linear. using patented flow control insert. Internal BSPT connections. Materials: Body: Forged Brass (ASTM B283). Body Size: Flow Optimizer: Noryl? 1/2 to 3 inches BSPT (two-way). Ball and Stem: 1/2 to 2-1/2 inches BSPT (three-way). Two-way: Nickel-chrome Plated Brass or 316 Stainless Steel. Flow Capacity: See Tables 1 and 2. Three-way: Nickel-chrome Plated Brass. Stem Seals: EPDM O-rings. Body Pressure Rating (maximum): 360 psi (2482 kPa) at Ball Seals: Reinforced TEFLON. Seals with EPDM O-250?F (121?C). rings. Controlled Medium: Water or Glycol solutions up to 50%. Approvals Standards: Not Valves: ANSI Class IV close-off/leakage (maximum suitable for combustible gases. 0.01% of CV let by) Actuators: See literature for the given actuator. Medium Temperature Range: -22 to +250?F (-30 to +121?C). Parts and Accessories:
5112-11 replacement mounting kit for Alerton direct
actuators. See Fig. 19.
? Registered Trademark of the General Electric Company TM Registered Trademark of E I DuPont de Nemours