DOC

2549 Measure and calculate in the joinery industry

By Mildred Andrews,2014-08-08 19:56
12 views 0
2549 Measure and calculate in the joinery industry

    2549 version 6

    Page 1 of 2

    Measure and calculate in the joinery industry

Level 3

    Credits 4

    Purpose People credited with this unit standard are able to apply calculations to

    workplace measurements, and formulate order and cutting lists in the joinery

    industry.

Subfield Joinery

    Domain Stairs and Other Joinery Trade Skills

    Status Registered

    Status date 23 January 2009

    Date version published 23 January 2009

    Planned review date 31 December 2013

    Entry information Open.

    Accreditation Evaluation of documentation and visit by NZQA and

    industry.

    Standard setting body (SSB) Joinery Industry Training Organisation

    Accreditation and Moderation Action Plan (AMAP) reference 0073

    This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Special notes

    1 All workplace practices must comply with current legislation, codes of practice, and

    documented site safety procedures for personal, product, and worksite safety.

    2 Legislation and regulations relevant to this unit standard include but are not limited to

     Health and Safety in Employment Act 1992; Health and Safety in Employment

    Regulations 1995.

     ; New Zealand Qualifications Authority 2010

    2549 version 6

    Page 2 of 2

    Elements and performance criteria

Element 1

    Apply calculations to workplace measurements in the joinery industry.

Performance criteria

    1.1 Mathematical principles used to calculate workplace measurements are

    identified.

    1.2 Linear, area, volume and mass calculations are applied to work to determine

    lengths and quantities.

    Range evidence is required of one example for each type of calculation.

Element 2

Formulate order and cutting lists in the joinery industry.

Performance criteria

    2.1 The required amount of the specified materials is ordered for the work detailed

    on the working drawings in accordance with workplace practice.

    2.2 Materials are cut or provided to the required dimensions for the work in

    accordance with workplace practice.

Please note

    Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

    Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards.

    Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

    Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Joinery Industry Training Organisation ceo@jito.org.nz if you wish to

    suggest changes to the content of this unit standard.

     ; New Zealand Qualifications Authority 2010

Report this document

For any questions or suggestions please email
cust-service@docsford.com