DOC

Weter6828A 3G user manual

By Ida Black,2014-07-04 12:27
8 views 0
Weter6828A 3G user manualuser,User,USER

    Contents

    Chapter 1. Product Features ………………………………………………….4 Chapter 2. Terms Explanation ………………………………………………..5

    1.User Authorization Level: …………………………………………….5

    2.Arming/ Automatic alarm …………………………………………….6

    3.Disarming ……………………………………………………………..6

    4.Incoming video call and Talkback………………………………….... 6

    5.Setting………………………………………………………………... 6

    6.Reset ……………………………………………………………….6 Chapter 3. Remote controller and remote handle illustration ……………..7 Chapter 4. Indicator light working Status Instruction …………………….8 Chapter 5. Installation ………………………………………………………..8 Chapter 6. Quick Start……………………………………………………….. 9

    1. Power on/ off …………………………………………………………9

    2. Start Remote camera …………………………………………………9

    3. Binding wireless remote controller …………………………………..9

    4. Binding wireless remote handle …………………………………...9

    5. Arming …………………………………………………………...10

    6.Disarming…………………………………………………………… 10

    7. Incoming video call ………………………………………………...10

    8. Press the emergency key to trigger an alarm: ………………………10 Chapter 7. Advanced Operation …………………………………………….10

    1.Activate remote camera ……………………………………………..10

    2. Modify the password ………………………………………………..11

    3. Modify the telephone number of master …………………………....11

    4. Add/delete the telephone number of normal users ……………….....11

    5. The operation illustration of wireless remote controller ……………12

    6. Binding wireless remote handle ………………………………….....14

    1

    7. Built-In PIR Sensor ON/ Off (Default: OFF) ……………………....14

    8. Wireless sensor ……………………………………………………..14

    9. Infrared light……………………………………………………….. 15

    Turn on infrared light: ………………………………………………....15

    10. Take photos ………………………………………………………..16

    11. Video recording …………………………………………………....16

    12. Automatic alarm …………………………………………………...16

    13.ON/OFF Live voice amplifiervolume adjustmentdigital zoom 17

    14. Getting help …………………………………………………….....17

    15. Reset the camera …………………………………………………..17 Chatpter 8. Maintenance…………………………………………………….18 Chapter 9. Common malfunction solutions ………………………………...18 Chapter 10. Main Technical Parameters …………………………………....19 Chapter 11. Appendix: SMS command list ………………………………....20

     2

    Thank you for purchasing the 3G Remote Camera. The user manual illustrates how to operate this product so please read the user manual carefully before using it.

    With this high-tech wireless equipment, you can monitor anywhere at anytime by dialing video calls with 3G mobile phone. The 3G remote camera can be widely used in houseschoolshopmoving carstrains or take care of elders

    and children as long as WCDMA network is available.

    Modern design 3G Remote camera matches excellent 2.0 mega pixels camera, you can send SMS command to make images and videos store in the camera. With built-in several pcs high-light infrared lights, the camera can shoot clear film even in darkness.

    The Remote camera is compatible with normal 315 MHz or 433 MHz wireless sensor in the market, such as wireless infrared motion detector, door sensor, smoke detector etc, and all of them are wireless, easy to use. You can also select any kind of sensor mentioned to work with our product. You or your family or your guards can receive the alarm message with your preset ways such as SMS,voice call, video call which are stored as evidence when the wireless sensor was triggered.

    All services and functions needs to be supported by the network and USIM card. Detailed operation and product functions, please refer to this brochure.

     3

For Your Safety

     The product complies with the relevant Chinese standard about

    electromagnetic compatibility. However, please keep away from electronic equipment which is likely to interfere by the wireless signal,

    to avoid the signal interruption.

     Switch off this product in any area marked "Explosive", "might explode", "closed wireless transceiver devices" etc.

     Do not dispose the product in a fire; otherwise, it may cause the

    battery explosion. Only use the power adaptor approved by the product manufacturer.

    The use of any other types may damage the product

     Keep the product and the accessories out of the reach of children. Declaration

     We operate a policy of continuous development. We reserve the right

    to make changes and improvements to any of the products described

    in this document without prior notice. For latest product information, We don’t guarantee for the document

    veracity, reliability or any content except regulate in proper laws.

    Including no guarantee for product suitable market or suitable area promise.

     Under no circumstances should be responsible for any loss of data or

    income or any special, incidental, consequential or indirect damages howsoever caused.

     Product supply may vary with the area,please check with our nearest

    authorized agency. Use only this product legally. do not monitor other one’s private places.

    we dont take any charge for the illegal use of this product. Chapter 1. Product Features

    ; This product uses USIM card, supporting WCDMA 3G network.. ; Built-in CMOS camera and infrared light, it supports real-time wireless video monitoring in 24 hours.

    ; You can send SMS to control camera remotely and check anywhere

    secretly and safely. ; Multimode alarm: Camera can send alarm messages by SMS, video call,

    voice call.

    ; Sensor detection: Max 15 wireless alarm sensors can be added. ; Support to record the alarming image to the camera

    ; Up to 10 telephone numbers can be pre-stored in the system. ; Matching wireless remote controller: Arming,disarming or emergency alarm.

    ; Special Camera: 2.0 mega pixels CMOS camera.

    ; Complete wireless connection.,easy installation:the product can be installed at any place you wanted.

    ; Built-in replaceable Lithium battery: rechargeable battery ensuring

    operation in case of external power failure.

     4

    ; Real-time video: you can call the video phone to check the image of

    monitoring area anytime and anywhere. ; Application: taking care of the elders and children, in house, school,

    monitoring shop, bus, ship, and train etc.

    Chapter 2. Terms Explanation

    Any mobile phone compatible with WCDMA can see the monitoring area by dialing video call. Any mobile phone with SMS function can control the remote camera with SMS command.

    Make sure to remember the product’s password and USIM number. Don’t disclose to others to ensure your privacy safety.

1.User Authorization Level:

    There are two levels remote camera user with different authority: Administrator (Master): Only one,master needs to store his/ her mobile

    number into the camera first. Otherwise, all the functions of the remote

    camera are disabledOnly one master mobile number can be set in the

    remote camera. The camera will send the alarm to master’s mobile

    number and normal user numbers set by the masterMaster should

    clearly remember the password and USIM number Only master has the

    authority to change the camera password and the user numbers,and enjoy

    all the service the product provided.

    Normal user(family):Max 10,normal users’ members have the right to access to

    video call, add the sensor and remote controller,and allow to send SMS

    to set this product; normal users numbers are set by the master.

    Difference authority between Master and normal users:

     User Type Normal Administer Function users

    Change normal user list ? ×

    Receive SMS ? ×

    Receive voice alarm Automatic ? ? calling Alarm

    Receive video alarm ? ? calling

    Monitor by dialing ? ? Dial the voice call phone Monitor by dialing number ? ? video call

     5

    Set sending SMS command ? ?

    Addmodifydelete sensor ? ?

    Bind wireless remote handle ? ?

    Change password ? ×

    System Recovery ? ×

    2.Arming/ Automatic alarm

    Arming is to make the remote camera in working status. In this status, all connected wireless sensor are in working.

    Under the arming, if any wireless sensor is activated, camera will send SMS or Video call or voice call to master to inform alarm immediately. If the master doesn’t answer the call, it will dial the next preset numbers until answered. This

    process will repeat three times, then exit dialing mode automatically if none of the preset numbers answered.

    3.Disarming

    Disarming is to deactivate the remote camera. All connected wireless sensors are in non-working status,the camera will not alarm automatically unless pressing the emergency key.

    4.Incoming video call and Talkback Real-time video can be turned on when master or normal users call the camera,at this time,press 3 key of phone button, turn on the Live voice amplifier,can shout on site.turn off the amplifier,please press 4 key of phone button.

    5.Setting

    All the set to this product can be completed by sending SMS command. 6.Reset

    Press and hold the SET key,and push the ON/OFF key to ON position, 5 seconds later ,the blue light and green light will turn on at the same time,the camera will automatic reset after you heard two “tick..”sound from the buzzer.

     6

    Chapter 3. Remote controller and remote handle illustration

    Remote controller and Remote handle Instructions 1. Antenna 2. Indicator light 3. Arming key 4. Disarming Key 5. Emergency key 6. Built-in PIR sensor ON/OFF key 7. Dial key 8. End key

    9. Digit keyboard

     7

Chapter 4. Indicator light working Status Instruction

    Color Action Status

    Continuously on Charging the battery. Red LED Off The battery charged full already.

    Searching the network when turn on Flash slowly the camera.

    Flash quickly Sensor alarming. Blue LED Not installed SIM card, or not

    Continuously on searched the WCDMA network,or

    the remote camera damaged.

    Arming status(Open the auto-alarm Continuously on function).

    Searched the WCDMA Green Flash slowly network/Disarming status. LED (Close the auto-alarm function)

    Flash quickly Processing data.

    Blue LED Turn on at the Learning remote controller and sensor Green same time status LED

    Chapter 5. Installation

    1. Install the USIM card

    ?Insert the USIM card into the slot according to the sign direction which showed on the camera.

    2. The use methods of bracket

    ?Provide universal bracket installation nut,can fix and install with any matched bracket.

    ?Connect the original adapter to an AC power socket (100-240V) ,and connect the mini-USB plug to the power interface of the camera. ?This product is built-in rechargeable Lithium battery. the camera will notify you when the power supply changed. for example, if the power adapter is disconnected or the AC power is cut off, it will show “AC power off”. If the power adapter is connected again, it will show “AC power recovered”.

    3. Choose the Installing position

    ?For better image quality, avoid the bright light(for example:window ,door etc.) irradiated directly into the lens of the camera. ?It is suggested to located the camera at the place where can look down the monitoring place with the minimum angel 30?.To prevent to be stolen, it is suggested that the camera is located at the place above the ground more than 2.2 meters.

    ?If 3G network is weak, the system will change to GSM network and video call prohibited; Therefore, the camera should be located at the place where strong network signal available.

     8

When installation, try to dial video call with 3G cell phone to check the video ?

    image, Re-locate the remote camera and adjust the camera’s angle to get best image.

    Chapter 6. Quick Start

    TipsAssure that USIM doesnt activate the caller transferring function and in

    coming call display,close the PIN code as well.

    1. Power on/ off

    ?Power on: turn the power switch to “On” position, The indicator light will be

    on continuously with blue color for 3-10 seconds, then change to flash slowly. After about 10-30 seconds,the indicator light changes to green color and flashes slowly (indicates disarming status) or green color lighted continuously (indicates arming status), which indicates that the camera has found the network and begun to work. At this moment, a sound of tickcan be heard from the camera. More information of the status please refers to indicator light status instruction. ?Power off: Turn the power switch to “Off” position.

2. Start Remote camera

    Dial a voice call to the camera by your mobile,it automatic default your mobile number as authorized Number after getting through. After successful start, your mobile phone will get a reply SMS: welcome to use

    3G remote camera,the password is 1234!

    At this moment, your mobile phone has been set as authorized Master number.. Note:Make sure that no authorized number set before performing above operation,if the camera has set before,please delete the old authorized mnumber or reset (hardware reset/SMS reset)the camera,then set new authorized number.

    3. Binding wireless remote controller

After successful start,press set key 3 seconds enter into learing status,the indicator blue and green light to be turned on at the same timepress any key of

    the new remote controller,the indicator light will flashs once,when the camera receive remote controller signal,it will be sound“tickonce and exit,if without learing remote contoller,the camera will automatic exit after 30 senconds.

4. Binding wireless remote handle

Send the following message to the camera by masters mobile:

    #addkey#

     9

    When the blue and green light to be turned on at the same time. please press any key of the wireless remote handle, the wireless remote handle indicator light will be flash once,when the camera received the remote handle signal,you will hear a tick sound, and green light flash slowly which indicate learing success, after that you will get the following SMS: Add keyboard successfully.

    5. Arming

    PressArming keydirectly on the remote control. If successful set, aticksound can be heard from the camera and the indicator light of the camera will turn on continuously with green color

6.Disarming

PressDisarming keydirectly on the remote control.

    If successful set, a ticksound can be heard from the camera and the indicator light of the camera will flash in green color.

7. Incoming video call

     Master and normal users who dial the camera with 3G mobile phone can watch the monitoring area after two ringing sound.

    Unauthorized access can not get through when dialing.

    8. Press the emergency key to trigger an alarm:

    Press the emergency key on the remote controller,the blue light flash quickly,green light is off,the camera will firstly send SMS to master to inform SOS alarm and then dial the phones of master or users members one by one. However, if the 3G network not available, the camera will dial the voice call until getting through.

    Chapter 7. Advanced Operation

    1.Activate remote camera

    (Authority: Master)

    When first time using or after resetting the remote camera, it needs to set the master number to activate the camera so that it can automatic send alarm message to the master.

     10

Report this document

For any questions or suggestions please email
cust-service@docsford.com