NESPOT on a Mac
This guide is intended to supplement the guide for PC users that can be found at http://gsis.yonsei.ac.kr/html/content.asp?code=006005001
Follow the guide linked above right up until “Installing NESPOT Software” and
do not close the window where you have just confirmed your ID. The
NESPOT software will only work on a Windows PC, so for the Mac you need to follow a slightly different procedure.
First open up your system preferences and choose “Network”:
Make sure “AirPort” is selected, then click “Advanced”:
Click on the “Ethernet” tab and then write down the “Ethernet ID” on a piece of paper, you’ll need this in a moment:
Go back to the internet window where your ID was confirmed to you. Look on he left-hand menu for “MAC ID 신청” and click.
Now you need to do is type in the Ethernet ID that you wrote down earlier, however it needs to be in ALL CAPS and without the colons “:” so for example:
10:34:f2:04:17:99 would become 1034F2041799
button. Once you have typed it in, hit the 수정
If your wireless doesn’t work, make sure you copied the Ethernet ID down correctly, and that you copied he Airport ID, and not your built-in Ethernet.