DOC

RedBack Show Commands

By Betty Snyder,2014-12-15 00:19
8 views 0
RedBack Show Commands

Total Requiements:

    The mode in which you enter a command is as follows: • Enter show commands in any mode.

    • Enter clear and reload commands in exec mode.

    • Enter the card command and the port command for any type of port or channel in global configuration mode.

    • Enter the loopback and shutdown commands in the configuration mode for the port or channel.

//show software information of transceivers

    [local]CE1(config)#card 10-ge-port 6

    [local]CE1(config-card)#show port transceiver ;因为transceiver都未配置?故没有软件信息;

     [local]CE1(config)#show port transceiver ?

     | Output Modifiers

    

    [local]CE1(config)#show port transceiver | grep 6/1 ;因为transceiver都未配置?故没有软件信息;

//show Bit Error Rate Test of specified port;not available for port type ethernet

    [local]CE1(config-card)#show bert

    % Incomplete command: show bert

    [local]CE1(config-card)#exit

    [local]CE1(config)#show bert

    % Incomplete command: show bert

    [local]CE1(config)#show bert ?

     slot/port:ch:sub Specify slot, port, and channel numbers [local]CE1(config)#show bert 7/1

    Bit error rate test is not available for port type ethernet [local]CE1(config)#show bert 6/1

    Port 6/1 is not configured.

//show overall information of hardware

    [local]CE1(config)#show hardware

Fan Tray Status Present

    Fan(s) Status Normal

    Power Supply A1 Status Normal

    Power Supply A2 Status Normal

    Power Supply B1 Status Normal

    Power Supply B2 Status Normal

    Active Alarms NONE

Slot Type Serial No Rev Ver Mfg Date Voltage Temp

    ---- -------------------- -------------- --- --- ----------- -------- -------

    N/A backplane D903444094314M 3 4 09-DEC-2009 N/A N/A N/A fan tray D80644409430YT 6 4 09-DEC-2009 N/A N/A

    6 ge-10-port A967G0810G0JYE 67 4 27-FEB-2010 OK NORMAL 7 xcrp4-base D207G0510G0H7S 0 4 12-FEB-2010 OK NORMAL 8 xcrp4-base D207G0510G0H96 0 4 12-FEB-2010 OK NORMAL 9 ge-10-port A967G0710G0JDZ 67 4 27-FEB-2010 OK NORMAL

    //show detailed info. of hardware (including all slots, ports etc.) [local]CE1(config)#show hardware detail

Fan Tray Status Present

    Fan(s) Status Normal

    Power Supply A1 Status Normal

    Power Supply A2 Status Normal

    Power Supply B1 Status Normal

    Power Supply B2 Status Normal

    Active Alarms NONE

    Slot : N/A Type : backplane Serial No : D903444094314M Hardware Rev : 03 EEPROM id/ver : 0x5a/4 Mfg Date : 09-DEC-2009 MAC Address : 00:30:88:04:33:03

    ODD Status : Not Available

    Chassis Type : SE1200 NEBS

    Slot : N/A Type : fan tray Serial No : D80644409430YT Hardware Rev : 06 EEPROM id/ver : 0x5a/4 Mfg Date : 09-DEC-2009 Air Filter Date : N/A

    ODD Status : Not Available

    Slot : 6 Type : ge-10-port Serial No : A967G0810G0JYE Hardware Rev : 67 EEPROM id/ver : 0x5a/4 Mfg Date : 27-FEB-2010 HubFpga rev : 0x53 HubFpga file rev : 0x53 SpiFpga rev : 0x13 SpiFpga file rev : 0x13 IPPA memory : 1024 MB EPPA memory : 1024 MB Voltage 1.500V : 1.513 (+1%) Voltage 1.800V : 1.802 (+0%) Voltage 2.500V : 2.480 (-1%) Voltage 3.300V : 3.322 (+1%) Temperature : NORMAL (37 C)

    Card Status : HW initialized POD Status : Success ODD Status : Not Available

    Fail LED : Off Active LED : On

Standby LED : Invalid

    Chass Entitlement : All (0x0)

    Ports Entitled : All

    Active Alarms : NONE

    Port : 1 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3XP4

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 2 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK23GY

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 3 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3WZR

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 4 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3XQB

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 5 SFP / Media Type : SX / MM CLEI code : RedbackApproved : No SFP Serial No : P7P2625

    Wavelength : 850.00[nm]

    TxPwrMin[dbm] : -40.00 TxPwrMax[dbm] : 6.99 RxPwrMin[dbm] : -40.00 RxPwrMax[dbm] : 6.99

    Port : 6 SFP / Media Type : ZX / SM CLEI code : IPUIASHCAA RedbackApproved : Yes SFP Serial No : BP1003880296

    Wavelength : 1550.00[nm]

    TxPwrMin[dbm] : -2.11 TxPwrMax[dbm] : 1.89 RxPwrMin[dbm] : -19.55 RxPwrMax[dbm] : 0.49

    Port : 7 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3XLS

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 8 SFP / Media Type : ZX / SM CLEI code : IPUIASHCAA RedbackApproved : Yes SFP Serial No : 89RT201379

    Wavelength : 1550.00[nm]

    TxPwrMin[dbm] : -4.49 TxPwrMax[dbm] : 4.51 RxPwrMin[dbm] : -12.72 RxPwrMax[dbm] : 7.65

    Port : 9 SFP / Media Type : SX / MM CLEI code : RedbackApproved : No SFP Serial No : PGK3HMD

    Wavelength : 850.00[nm]

    TxPwrMin[dbm] : -9.50 TxPwrMax[dbm] : -4.00 RxPwrMin[dbm] : -18.01 RxPwrMax[dbm] : 0.00

    Slot : 7 Type : xcrp4-base - T1/E1 Serial No : D207G0510G0H7S Hardware Rev : 07 - EEPROM id/ver : 0x5a/4 Mfg Date : 12-FEB-2010 HubFPGA Ver : 0x1e SysFPGA Ver : 0x5 SysCPLD Ver : 0x4

    Voltage 1.200V BCM : 1.191 (-1%) Voltage 1.200V GEN : 1.186 (-1%) Voltage 1.300V : 1.293 (-1%) Voltage 1.800V : 1.782 (-1%) Voltage 2.500V : 2.475 (-1%) Voltage 3.300V : 3.291 (-0%) Voltage 12.000V : 11.865 (-1%)

    Voltage 0.900V AIN1 : 0.891 (-1%) Voltage 1.500V AIN2 : 1.501 (+0%) Temp.- Inlet Air : NORMAL (24 C) Temp.- Exhaust Air : NORMAL (30 C) Temp.- Processor : NORMAL (35 C)

    POD Status : Success ODD Status : Not Available Fail LED : Off Active LED : On Standby LED : Off Sync LED : Off Memory : Max

    Chass Entitlement : All (0x0)

    Active Alarms : NONE

    Slot : 8 Type : xcrp4-base - T1/E1 Serial No : D207G0510G0H96 Hardware Rev : 07 -

    EEPROM id/ver : 0x5a/4 Mfg Date : 12-FEB-2010 HubFPGA Ver : 0x1e SysFPGA Ver : 0x5 SysCPLD Ver : 0x4

    Voltage 1.200V BCM : 1.196 (-0%) Voltage 1.200V GEN : 1.191 (-1%) Voltage 1.300V : 1.293 (-1%) Voltage 1.800V : 1.791 (-0%) Voltage 2.500V : 2.490 (-0%) Voltage 3.300V : 3.300 (+0%) Voltage 12.000V : 11.674 (-3%)

    Voltage 0.900V AIN1 : 0.903 (+0%) Voltage 1.500V AIN2 : 1.501 (+0%) Temp.- Inlet Air : NORMAL (23 C) Temp.- Exhaust Air : NORMAL (29 C) Temp.- Processor : NORMAL (35 C)

    POD Status : Success ODD Status : Not Available Fail LED : Off Active LED : Off Standby LED : On Sync LED : Off Memory : Max

    Chass Entitlement : All (0x0)

    Active Alarms : NONE

    Slot : 9 Type : ge-10-port Serial No : A967G0710G0JDZ Hardware Rev : 67 EEPROM id/ver : 0x5a/4 Mfg Date : 27-FEB-2010 HubFpga rev : 0x53 HubFpga file rev : 0x53 SpiFpga rev : 0x13 SpiFpga file rev : 0x13 IPPA memory : 1024 MB EPPA memory : 1024 MB Voltage 1.500V : 1.513 (+1%) Voltage 1.800V : 1.802 (+0%) Voltage 2.500V : 2.492 (-0%) Voltage 3.300V : 3.322 (+1%) Temperature : NORMAL (37 C)

    Card Status : HW initialized POD Status : Success ODD Status : Not Available

    Fail LED : Off Active LED : On Standby LED : Invalid

    Chass Entitlement : All (0x0)

    Ports Entitled : All

    Active Alarms : NONE

    Port : 2 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3XNT

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 3 SFP / Media Type : ZX / SM CLEI code : IPUIASHCAA RedbackApproved : Yes SFP Serial No : BP1003880208

Wavelength : 1550.00[nm]

    TxPwrMin[dbm] : -2.04 TxPwrMax[dbm] : 1.96 RxPwrMin[dbm] : -19.55 RxPwrMax[dbm] : 0.49

    Port : 4 SFP / Media Type : ZX / SM CLEI code : IPUIASHCAA RedbackApproved : Yes SFP Serial No : BP1003880450

    Wavelength : 1550.00[nm]

    TxPwrMin[dbm] : -1.58 TxPwrMax[dbm] : 2.42 RxPwrMin[dbm] : -19.55 RxPwrMax[dbm] : 0.49

    Port : 5 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3XQZ

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 6 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3X9P

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 7 SFP / Media Type : SX / MM CLEI code : VAUIAAWEAA RedbackApproved : Yes SFP Serial No : PH52FRN

    Wavelength : 850.00[nm]

    TxPwrMin[dbm] : -11.74 TxPwrMax[dbm] : -2.00 RxPwrMin[dbm] : -20.00 RxPwrMax[dbm] : 1.00

    Port : 8 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3WZU

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 9 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3XNR

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 10 SFP / Media Type : ZX / SM CLEI code : IPUIASHCAA RedbackApproved : Yes SFP Serial No : 89UT200243

    Wavelength : 1550.00[nm]

    TxPwrMin[dbm] : -8.59 TxPwrMax[dbm] : 0.41 RxPwrMin[dbm] : -13.29 RxPwrMax[dbm] : 7.21

//show overall software info of port (including Channels and SubChannels if they exist)

    [local]CE1(config)# show port

    Slot/Port:Ch:SubCh Type State

    7/1 ethernet Down

//show detailed software info of port

    [local]CE1(config)#show port detail

    ethernet 7/1 state is Down

    Description : management port

Line state : Down

    Admin state : Up

    Encapsulation : ethernet

    MTU size : 1500 Bytes

    MAC address : 00:30:88:04:33:03 // portmac addbackplane的一样

    Media type : 10/100/1000Base-Tx

    Speed : 100 Mbps

    Duplex mode : half

    Active Alarms : NONE

    //show port counters (calculate packets and bytes sent/recvd) [local]CE1(config)#show port counters

    Port Type

    7/1 ethernet

    packets sent : 10 bytes sent : 464 packets recvd : 0 bytes recvd : 0

//show Performance Monitoring of specified port(not available for port type ethernet)

    [local]CE1(config)#show port perf-monitor

    % Incomplete command: show port perf-monitor

    [local]CE1(config)#show port perf-monitor ?

     slot/port:ch:sub Specify slot, port, and channel numbers [local]CE1(config)#show port perf-monitor 7/1

    ethernet 7/1 state is Down

    Description : management port

Line state : Down

    Admin state : Up

    Encapsulation : ethernet

MTU size : 1500 Bytes

    MAC address : 00:30:88:04:33:03

    Media type : 10/100/1000Base-Tx

    Speed : 100 Mbps

    Duplex mode : half

    Active Alarms : NONE

    Performance monitoring is not available for port type Ethernet

    [local]CE1(config)#show port perf-monitor 6/1 Jun 7 15:28:29: %CSM-6-PORT: Port 6/1 is not configured

[local]CE1(config)#show port detail 7/1

     ^

    % Invalid input at '^' marker

[local]CE1(config)#show port detail ?

     | Output Modifiers

    

    [local]CE1(config)#show port detail | grep 7/1 ethernet 7/1 state is Down

    [local]CE1(config)#show port detail | grep 6/1

//show system alarms

    [local]CE1(config)#show system alarm

    Timestamp Type Source Severity Description ---------------------------------------------------------------------------

    (no alarm exists)

    [local]CE1(config)#show system alarm all

    Timestamp Type Source Severity Description ---------------------------------------------------------------------------

    //set system alarm(including air-filter, redundancy, and transceiver) [local]CE1(config)#system alarm

    % Incomplete command: system alarm

    [local]CE1(config)#system alarm ?

     air-filter Set air filter alarm interval

     redundancy Set redundancy related alarms

     transceiver Set transceiver related alarms

    [local]CE1(config)#system alarm redundancy

    % Incomplete command: system alarm redundancy

    [local]CE1(config)#system alarm redundancy ?

     suppress Suppress all redundancy related alarms [local]CE1(config)#system alarm redundancy suppress [local]CE1(config)#system alarm redundancy suppress ?

    

[local]CE1(config)#system alarm redundancy suppress

//shutdown specified port

    [local]CE1(config)#port ge-10-port 6/1 shutdown

     ^

    % Invalid input at '^' marker

[local]CE1(config)#port ge-10-port ?

     Unrecognized command %

    [local]CE1(config)#port ?

     atm Select ATM port to configure

     bvi Bridge Virtual Interface Port (BVI)

     ethernet Select Gigabit Ethernet port to configure

     pos Select Packet Over SONET port to configure

     pseudowire Configure port pseudowire

    [local]CE1(config)#port ethernet ?

     slot/port:ch:sub Enter slot/port

    [local]CE1(config)#port ethernet 7/1

    [local]CE1(config-port)#shutdown

    [local]CE1(config-port)#no shutdown

[local]CE1(config-port)#show port

    Slot/Port:Ch:SubCh Type State

    7/1 ethernet Down

//show hardware info of chassis

    [local]CE1(config-port)#show chassis //各种模式下看都可以吧

    Current platform is SE1200 NEBS

     (Flags:

     A-Active Crossconnect B-Standby Crossconnect C-SARC Ready

     D-Default Traffic Card E-EPPA Ready G-Upgrading FPGA

     H-Card Admin State SHUT I-IPPA Ready M-FPGA Upgrade Required

     N-SONET EU Enabled O-Card Admin State ODD P-Coprocessor Ready

     P1-ASP1 Ready P2-ASP2 Ready R-Traffic Card Ready

     S-SPPA Ready U-Card PPAs/ASP UP W-Warm Reboot

     X-XCRP mismatch)

    Slot: Configured-type Slot: Installed-type Initialized Flags -------------------------------------------------------------------------------

     1 : none 1 : none No

     2 : none 2 : none No

     3 : none 3 : none No

     4 : none 4 : none No

     5 : ge-10-port 5 : none No H

     6 : ge-10-port 6 : ge-10-port Yes IEUDR

     7 : xcrp4-base 7 : xcrp4-base Yes A

     8 : xcrp4-base 8 : xcrp4-base Yes B

     9 : ge-10-port 9 : ge-10-port Yes IEUR

     10 : ge-10-port 10 : none No H

     11 : none 11 : none No

     12 : none 12 : none No

     13 : none 13 : none No

     14 : none 14 : none No

//show hardware fantray detail

    [local]CE1(config)#show hardware fantray detail

    Slot : N/A Type : fan tray Serial No : D80644409430YT Hardware Rev : 06 EEPROM id/ver : 0x5a/4 Mfg Date : 09-DEC-2009 Air Filter Date : N/A

    ODD Status : Not Available

//in card mode show hardware of this card

    [local]CE1(config-card)#show hardware card 6 detail

    Slot : 6 Type : ge-10-port Serial No : A967G0810G0JYE Hardware Rev : 67 EEPROM id/ver : 0x5a/4 Mfg Date : 27-FEB-2010 HubFpga rev : 0x53 HubFpga file rev : 0x53 SpiFpga rev : 0x13 SpiFpga file rev : 0x13 IPPA memory : 1024 MB EPPA memory : 1024 MB Voltage 1.500V : 1.513 (+1%) Voltage 1.800V : 1.802 (+0%) Voltage 2.500V : 2.480 (-1%) Voltage 3.300V : 3.322 (+1%) Temperature : NORMAL (37 C)

    Card Status : HW initialized POD Status : Success ODD Status : Not Available

    Fail LED : Off Active LED : On Standby LED : Invalid

    Chass Entitlement : All (0x0)

    Ports Entitled : All

    Active Alarms : NONE

    Port : 1 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK3XP4

    Wavelength : 1310.00[nm]

    TxPwrMin[dbm] : -11.50 TxPwrMax[dbm] : -1.00 RxPwrMin[dbm] : -23.98 RxPwrMax[dbm] : 0.00

    Port : 2 SFP / Media Type : LX / SM CLEI code : VAUIAAXEAA RedbackApproved : Yes SFP Serial No : PGK23GY

Report this document

For any questions or suggestions please email
cust-service@docsford.com