DOC

RESUME

By Eric Cunningham,2014-04-12 07:26
15 views 0
Product Design and Development of castings using PRO-ENGINEER 2000i, in developing of castings for automobile manufacturers in India like TELCO, L&T,

    RESUME

    P. NALLASIVAM

    CCCC CAREER OBJECTIVES

ASPIRING TO BE A PART OF A GROWING ORGANIZATION AND TO ADD SIGNIFICANT VALUE

    TO THE ORGANISATION I JOIN, BY CONTRIBUTING MY SKILLS AND EXPERTISE

Experience in Design : 4 ? Years

    Experience in Production : 4 ? Years

PROFESSIONAL EXPERIENCE # 1

    Organization : M/s Magna Electro Castings Ltd.,

    Designation : Product Development Engineer

Duration : Feb’2000 to Jun’ 2003

Company Profile:

     M/s Magna Electro Castings Ltd., is an ISO9002 Company, manufacturers of Graded Greensand and

    CO2 Moulded Grey and S.G.Iron Castings located at Coimbatore,TN,India

Job Description:

     Product Design and Development of castings using PRO-ENGINEER 2000i, UNIGRAPHICS V18,

     SOLID EDGE V14 AND AUTOCAD 2002 Softwares.

     I have successfully completed designing and developing of castings for market in INDIA, USA,

    GERMANY, JAPAN and ITALY. Our team has successfully completed in developing of castings for

    automobile manufacturers in India like TELCO, L&T, MAHINDRA&MAHINDRA, RANE etc., and also

    international customers like FLOWSERVE, GENERAL ELECTRIC, TWINDISC, MITSUBISHI etc.,

     I have been headed as a team leader for Product Development and CAD/CAM department where 3D

    modelling and 2D drawings evaluated and approved for manufacturing.

This involves :

    ? Understanding of complex engineering drawings like cylinder block, cylinder head, valve bodies

    and covers, manifold, flywheel and hub, etc., for different manufacturing sectors.

    ? Plan, coordinate and execute the technical concepts of 3D modelling.

    ? Conversion of 2D drawings into 3D solid modeling.

    ? Developing of 2D drawings like mould drawings, core drawings, layout drawings , m/c ing

    drawings, etc.

    ? Creation of parting line as per mould design concepts.

    ? Design of tooling equipments like pattern, core box, loose piece, mould and cavity, etc., using solid

    modelling

    ? Assisting production team in the modification of casting drawings for high volume of production.

PROFESSIONAL EXPERIENCE # 2

    Organization : M/s Indo shell cast (P) Ltd.,

    Designation : Production Supervisor and Mechanical Tool Designer

Duration : Aug’1994 to Feb’2000

Company Profile:

     M/s Indo shell cast (P) Ltd., is an ISO9002 Company, manufacturers of Graded Shell moulded and

     CO2 Moulded Grey and S.G.Iron Castings located at Coimbatore,TN,India

     Our team has successfully completed in designing and developing of castings especially in shell

    process where high dimensional accuracy, surface finish and high volumes for automobile and hydraulic

    manufacturers like HERO HONDA MOTORS, TVS-SUZUKI, FISHER ZOMAX SANMAR LTD.,

    YUKEN INDIA LTD., REXROTH INDIA LTD., etc.,

Job Description:

1.Production Supervisor-Shell Moulding (3 ? Years)

    ? Preparation of shell coated sand as per our requirements.

    ? Preparation of Production planning as per customer schedule.

    ? Arranging of required manpower, machinery and raw materials such as shell sand,

    coresand, pattern, corebox, loosepieces etc., which are used for production.

    ? Calibration of measuring and test equipments as per ISO9000 standards.

    ? Arranging of tools, gauges, jigs and fixtures used for production.

    ? Inspection of tools and gauges in which it’s accuracy within the specification limit.

    ? Inspection of moulds and cores in which it’s quality within the specifications.

    ? Preparation of inspection reports when production going on.

    ? Preparation of log sheets in which how much production dine in shift/hour.

    ? Calculating the efficiencies of man and machine by using time study and method study

    techniques.

    ? Preparation of statistical control charts.

    ? Reporting to production manager about overall efficiency of production and give

    suggestions for improvements.

     The following are the quality system tools used for our development:

    1. DESIGN REVIEW

    2. CONTROL PLAN CHARTS

    3. CONTINUOUS IMPROVEMENT TEAM

    4. FAILURE MODE AND EFFECT ANALYSIS (FMEA)

    5. ADVANCED PRODUCT QUALITY PLANNING (APQP)

    6. STATISTICAL QUALITY CONTROL (SQC)

2. Tool Designer (2 Years)

     Designing and development of castings using SOLID WORKS 2001 PLUS, MASTERCAM and

    AUTOCAD softwares. I have been worked as a Mechanical Tool Designer in Engineering Department

    where 3D modelling and 2D drawings were prepared for manufacturing.

    PROFESSIONAL EXPERIENCE # 3

    Organization : M/s Al Shiravi Equipment Company L.L.C.,

Designation : Mechanical Draughtsman

Duration : Aug’2003 to Aug’2004

Company Profile:

     M/s Al Shiravi Equipment Company L.L.C., is one of the world's leading body manufacturers of trucks

    and buses for different heavy

    transport applications located at Dubai, United Arab Emirates.

Job Description:

1.Mechanical draughtsman (1 Year)

    ??Designing and modelling of truck body equipments using Solid Edge V14 and Autocad

    2000 softwares.

    ??Calculating the physical properties of materials like surface area , volume etc., from the

    solid model.

    ??Making bill of materials

    ??Design of tools and gauges used for construction of bodies.

    Preparation of machining drawings etc.,

EDUCATIONAL QUALIFICATIONS:

    1. Diploma in Mechanical Engineering

    At The Karur Polytechnic, Karur, India passed in April 1994 with Distinction of 87.60%

    Elective Subject : Automobile Technology

    2. Metrology & Quality Control

    Measuring Instruments, Calibration & ISO 9000 standards procedures were carried at

    P.S.G Polytechnic, coimbatore completed in Sep’1996.

    3. PRO-ENGINEER (Mechanical Design Course)

    3D Part modelling, Mechanical Assembly, Detailing, Layouts and Mould Design - Module

     completed in Jan’2000.

    4. A.M.I.E (India) conducted by The Institution of Engineers (India) doing on at present.

    ADDITIONAL QUALIFICATIONS:

Operating System: Windows 95/98/2000/NT/XP & MS-DOS

    Softwares: PRO-ENGINEER 2000i (Part Modelling, Assembly and Detailing)

     UNIGRAPHICS V18 (Part modelling, Assembly, Drawing and Manufacturing)

     SOLID EDGE V14 (Part Modelling, Assembly and Drafting)

     SOLID WORKS 2001 PLUS (Part Modelling, Assembly and Drawing)

     AUTOCAD (R14/2000/2002)

Sound Knowledge : MS-Office 2000 (MS Word, Excel, PowerPoint, Outlook Express)

PERSONNEL PROFILE:

     th March 1976 Date of Birth : 17

Place of Birth : Karur, TamilNadu, India.

Contact Address : Phase-1, D-6,

     Kurichi Housing Unit, Sidco,

     Coimbatore - 641 021.

     Contact Tel.No. 0422-2679993

     E-mail ID : nallasivam_1@hotmail.com

Marital Status : Single

Nationality : Indian

Language Known : Tamil and English

.

Report this document

For any questions or suggestions please email
cust-service@docsford.com