TXT

ISND

By Jerome Alexander,2014-06-07 08:32
11 views 0
ISND

current router (branch1) is at a remote site and the target router (main1)

    is at a central site.??

Table: Example ISDN Configuration

Configuration for the Current Router

Router> enable

    password:pail1

    Router# config term

    Router (config-if)# hostname branch1

    branch1 (config-if)# username main1 password secret1 branch1 (config)# isdn switch-type basic-dms100 branch1 (config)# interface Ethernet 0

    branch1 (config)# ip address 172.16.80.170 255.255.255.0 branch1 (config-if)# interface bri 0

    branch1 (config-if)# ip address 172.16.71.1 255.255.255.0 branch1 (config-if)# isdn spid1 415988488501 9884885 branch1 (config-if)# isdn spid2 415988488602 9884886 branch1 (config-if)# dialer load-threshold 128 branch1 (config-if)# ppp multilink

    branch1 (config-if)# encapsulation ppp

    branch1 (config-if)# ppp authentication chap branch1 (config-if)# dialer map ip 172.16.71.2 name main1 9884883

    branch1 (config-if)# dialer group 1

    branch1 (config-if)# exit

    branch1 (config)# dialer-list 1 protocol ip permit branch1 (config-if)# ip route 172.16.0.0 255.255.0.0 172.16.71.2

    branch1 (config-if)# ip route 0.0.0.0 172.16.71.2 branch1 (config)# exit

    branch1# copy running-config startup-config branch1#

Configuration for the Target Router

Router> enable

    password: pail2

    Router# config term

    Router (config)# hostname main1

    main1 (config)# username branch1 password secret1 main1 (config)# isdn switch-type basic-dms100 main1 (config)# interface Ethernet 0

    main1 (config)# ip address 172.16.64.190 255.255.255.0 main1 (config-if)# interface bri 0

    main1 (config-if)# ip address 172.16.71.2 255.255.255.0 main1 (config-if)# isdn spid1 415955488201 9884882 main1 (config-if)# isdn spid2 415988488302 9884883 main1 (config-if)# dialer load-threshold 128 main1 (config-if)# ppp multilink

    main1 (config-if)# encapsulation ppp

    main1 (config-if)# ppp authentication chap

    main1 (config-if)# dialer map ip 172.16.71.1 name branch1 9884885

    main1 (config-if)# dialer group 1

    main1 (config-if)# exit

    main1 (config)# dialer-list 1 protocol ip permit main1 (config-if)# ip route 172.16.80.0 255.255.0.0 172.16.71.1 Router (config-if)# exit

    main1# copy running-config startup-config

    main1#

Report this document

For any questions or suggestions please email
cust-service@docsford.com