DOC

I. Products

By Amanda Cook,2014-04-16 05:27
8 views 0
I. Products

Supplier: Foxconn Technology CZ s.r.o. FILL IN NAME AND ADDRESS HERE Karlov 245, 284 01 Kutná Hora, Czech Republic

    Material Declaration of Conformity

I. Products

    The Supplier hereby declares that all the products the Supplier supplies to Foxconn Technology CZ s.r.o. after the date of issuance of this Declaration under any and all contractual arrangements currently in force or entered into after the issuing of this Declaration (“Products”) fully comply with the provisions stipulated by EU Directive RoHS 2002/95/EC (“Directive”) and Regulation REACH 1907/2006/EC („Regulation“), therefore, the content of the below stated chemical substances in the homogeneous material of the Products does not, save

    for the exceptions stated in the Directive, exceed the set limits:

    Substance Limit by weight

    Lead (Pb) 0,1 % (1000 ppm)

    Cadmium (Cd) 0,01 % (100 ppm) 6+Chromium (Cr) 0,1 % (1000 ppm)

    Mercury (Hg) 0,1 % (1000 ppm)

    Polybrominated biphenyls (PBB) 0,1 % (1000 ppm)

    Polybrominated diphenyl ethers (PBDE) 0,1 % (1000 ppm)

II. Packaging

    Notwithstanding to any other provisions of Clause I. of this Declaration, the Supplier hereby declares that any and all packaging materials and/or package components pursuant to EU Directive 94/62/EC and/or an applicable national legislation which are delivered as Products or together with the Products (“Packaging”) fully comply with the applicable provisions stipulated by EU Directive 94/62/EC and, therefore,

    the content of the below stated chemical substances in the Packaging fully complies, save for the exceptions stated in the EU Directive 94/62/EC, with the following:

     6+1) Overall content Lead (Pb) + Cadmium (Cd) + Mercury (Hg) + Hexavalent chromium (Cr) in the homogenous material does not

    exceed 0,01%, 100 mg/kg, 100 ppm.

    2) Packaging does not contain any amount of lead, mercury, cadmium or hexavalent chromium as an intentionally added element.

    3) Methyl bromide is not used for fumigation of Packaging.

III. Requirements of Foxconn’s Customers

    Any and all requirements of the Customers regarding the Products, Packaging, including any and all of Products/Packaging materials are specified in detail in the latest version of the Foxconn Substance Policy always available at

    http://www.foxconn.cz/doc/Foxconn_substance_policy_rev5.pdf. The Supplier undertakes to always comply with the latest version of the

    Foxconn Substance Policy available at the above stated website. Foxconn Substance Policy shall prevail in case of any inconsistencies between the requirements of Foxconn Substance Policy and the requirements pursuant to Section I and/or II above. Current list of hazardous substances according to Foxconn Substance policy:

    Substance / Látka Details of Restriction / Upřesnění omezení Acryl amide 1000 ppm (0,1%)

    Alpha-hexabromocyclododecane 1000 ppm (0,1%)

    Aluminosilicate Refractory Ceramic Fibres 1000 ppm (0,1%)

    (Aluminosilicate Refractory Ceramic Fibres are fibres covered by index

    number 650-017-00-8 in Annex VI, part 3, table 3.2 of Regulation (EC) No

    1272/2008, and fulfil the two following conditions:

    a) Al2O3 and SiO2 are present within the following concentration ranges:

    • Al2O3: 43.5 47 % w/w,

    and SiO2: 49.5 53.5 % w/w, or

    • Al2O3: 45.5 50.5 % w/w, and SiO2: 48.5 54 % w/w,

    b) fibres have a length weighted geometric mean diameter less two

    standard geometric errors of 6 or less micrometers (μm).)

    Anthracene 1000 ppm (0,1%)

    Antimony/Antimony Compounds 1000 ppm (0,1%)

    Antimony Trioxide 1000 ppm (0,1%)

    Anthracene oil, paste, fraction, anthracene-low, distn. Lights 1000 ppm (0,1%)

    1/8 FZEMSP-024, Attachment 4a, rev.4

    Arsenic/Arsenic Compounds 1000 ppm (0,1%), 50 ppm (0,005%) Arsenic used in LCD or

    LCM display glass, Asbestos Prohibited

    Azo Colorants 30 ppm (0,003%) colorants for textile, plastics and leather

    articles

    Batteries Mercury 5 ppm (0,0005%), 20000 ppm (2%) Button cell bateries and

    Batteries composed of button cell bateries (products, parts

    and components must not contain mercuric oxide batteries),

    alkaline zinc and manganese batteries must not contain more

    than 1 ppm (0,0001%) Batteries Cadmium 10 ppm (0,001%), 5 ppm (0,0005%) for built-in batteries

    (such as those that are soldered or glued) Batteries Lead (nonrechargeable) 2000 ppm (0,2%), 1000 ppm (0,1%) built-in batteries (such

    as those that are soldered or glued) Batteries Nonrechargeable Alkaline and No threshold hermetically seal Carbon-Zinc Batteries

    Battery cells nickel cadmium battery 20 ppm (0,002%) Battery cells lead-acid, zinc-manganese, alkaline batteries 40 ppm (0,004%) Beryllium/Beryllium Compounds 200 ppm (0,02%) Beta-hexabromocyclododecane 1000 ppm (0,1%) Bis (2-ethylhexyl) phthalate (DEHP) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material Bismuth/Bismuth Compounds 1000 ppm (0,1%) Brominated Biphenyls (PBBs) 1000 ppm (0,1%), prohibited in textile articles intended to

    come into contact with the skin Brominated Flame Retardants (other than PBBs or PBDEs) 900 ppm (0,09%) Brominated Flame Retardants (PBBs, PBDEs, including DecaBDE) 1000 ppm (0,1%) Butyl benzyl phthalate (BBP) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material Cadmium/Cadmium compounds 50 ppm (0,005%) (paint, varnish, color pigment, dye,

    stabilizer or alloy applications), prohibited (plating or surface

    coating), 100 ppm Cd+ Cr(VI) + Hg + Pb cumulative in

    packaging materials Cobalt dichloride 1000 ppm (0,1%) Diarsenic pentaoxide 1000 ppm (0,1%) Diarsenic trioxide 1000 ppm (0,1%) Dibutylphthalate (DBP) Prohibited at levels above 1000 ppm (0,1%) in any

     homogeneous material Diisobutyl phthalate 1000 ppm (0,1%) 4,4?- Diaminodiphenylmethane (MDA) 1000 ppm (0,1%) Dimethylfumarate (DMF) 0,1ppm (0,00001%) (such as leather and desiccant packs)

    2,4-Dinitrotoluene 1000 ppm (0,1%) Di-?-oxo-di-n-butylstanniohydroxyborane (DBB dibutyltin hydrogen 1000 ppm (0,1%) in preparations borat)

    Fluorinated Greenhouse Gases Not used

    Formaldehyde 5 ppm (0,0005%) (wooden materials, furniture, detergents,

    cleaning agents, polishes), 75 ppm (0,0075%) in textile

    materials intended for skin contact by weight in any 3homogeneous textile material, 0,1 mL/m (wood, adhesive,

    plastic)

    Formaldehyde emissions 0,08 ppm (0,000008%) (Hardwood Plywood), 0,18 ppm

    (0,000018%) (Particleboard), 0,21 ppm (0,000021%)

    (Medium Density Fiberboard) Gamma-hexabromocyclododecane 1000 ppm (0,1%) Gallium (elemental) 0,1 g liquid gallium per component Halogenated aromatic substances 500 ppm (0,05%) (in capacitors and transformers for

    2/8 FZEMSP-024, Attachment 4a, rev.4

    monohalogenated), 50 ppm (0,005%) (in material of the

    components for polyhalogenated aromatic substances) Halogenated Diphenyl Methanes Prohibited in preparations and products

     Bromine (in the form of flame retardants) and chlorine (in the

    Halogenated Flame Retardants and Polyvinyl Chloride (bromine and form of polyvinyl chloride, polyvinyl copolymers or flame

    chlorine) retardants) must not be used in parts, components, materials,

    or products in concentrations equal to or greater than 1000

    ppm (0,1%) in any homogeneous plastic material Bromine and chlorine in printed circuit boards printed circuit boards and substrate laminates must not

    contain more than 900 ppm (0,09%) by weight of bromine

    and chlorine (electrical insulator, wire, tape, tubing, cable

    enclosure, vibration dampener) Total bromine and chlorine in printed circuit boards Conbinated total concentration of bromine and chlorine in

    printed curcuit boards and substrate laminates must not

    exceed 1500 ppm (0,15%) (electrical insulator, wire, tape,

    tubing, cable enclosure, vibration dampener) Hexabromocyclododecane (HBCDD) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material Hexachloroethane Prohibited in manufacturing or processing of nonferrous

    metals

    Hexavalent Chromium/Hexavalent Chromium compounds Prohibited (metallic applications), 1000 ppm (0,1%) (non-

    metallic applications - intentional addition is prohibited in

    paints and plastic resins), 3 ppm (0,0003%) leather, 100 ppm

    Cd + Cr(VI) + Hg + Pb cumulative in packaging materials Chlorinated Solvents (Chlorinated Hydrocarbons) 1000 ppm (0,1%)

    Lead hydrogen arsenate 1000 ppm (0,1%)

    Lead/Lead compounds 1000 ppm (0,1%), 300 ppm (0,03%) (lead in external PVC

    coated cable, wire and cords), 1000 ppm (0,1%) (lead in

    internal PVC coated cable, wire and cords), 50 ppm (0,005%)

    (all plastic material, cable enclosures, paints, inks, non-

    metallic, non-ceramic coatings), 100 ppm Cd + Cr(VI) + Hg +

    Pb cumulative in packaging materials Lead chromate 1000 ppm (0,1%)

    Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 1000 ppm (0,1%)

    Lead sulfochromate yellow (C.I. Pigment Yellow 34) 1000 ppm (0,1%)

    Magnesium/Magnesium Alloys 1000 ppm (0,1%)

    Mercury/Mercury compounds 1000 ppm(0,1%), 50 ppm (switches, dyes), 100 ppm (Cd +

    Cr(VI) + Hg + Pb cumulative) in packaging materials Nickel Prohibited on surfaces that are designed to be in prolonged

    contact with skin

    Nickel on external surfaces 0,5 ?g/cm2/week released Ozone Depleting Substances Prohibited in the manufacturing process Perfluorocarbons Must not be contained in products or parts as a gas Perfluorooctane sulfonate Prohibited in manufacturing and use. Prohibited as a

    substance of in preparations at concentrations equal to or

    higher than 50 ppm (0,005%) by mass or in semifinished

    products or articles in concentrations equal to or higher than

    1000 ppm (0,1%) by mass. Phenol,2-(2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl) Not used in products Phosphorus, Red 1000 ppm (flame retardant) Pitch, coal tar, high temp. 1000 ppm (0,1%)

    Polybrominated Diphenyl ethers (PBDEs) 1000 ppm (0,1%)

    Polybrominated Biphenyl (PBB) 1000 ppm (0,1%)

    Polycyclic Aromatic Hydrocarbons (PAH) Benzo?a?pyren 1 gm/kg (in external cases for portable devices,

    (Product category 2) desktop keyboard and mouse, portable computes, external

    power supplies for portable devices, cables for portable

    devices) sum 16 PAH (EPA) - 10 mg/kg

    3/8 FZEMSP-024, Attachment 4a, rev.4

    Polycyclic Aromatic Hydrocarbons (PAH) Benzo?a?pyren 20 gm/kg (in external cases for stationary (Product category 3) devices, desktop PCs, monitors, external power supplies for

    stationary devices, power cables for stationary devices) sum

    16 PAH (EPA) - 200 mg/kg Polychlorinated Biphenyls (PCBs) Prohibited

    Polychlorinated Naphthalenes Prohibited in chemical products Polychlorinated Terphenyls Prohibited

    Polyvinyl Chloride (PVC) prohibited in the external case plastic parts (does not apply to

    the sheathing of wires and cables, plastic parts weighing less

    than 25 grams, to protective product covers, or to display

    screens for projection) Radioactive Substances Any intentional addition Selenium/Selenium Compounds 1000 ppm (0,1%) Shortchain Chlorinated Paraffins 1000 ppm (0,1%) Sodium dichromate 1000 ppm (0,1%) Tetrabromobisphenol A (TBBP-A) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material (exemption the use of TBBP-A as

    reactive flame retardant in epoxy and polycarbonates resins)

    5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene) 1000 ppm (0,1%) Tributyl Tin Oxide (TBTO) Prohibited in chemical products Tributyl Tin (TBT), Triphenyl Tin (TPT) Any intentional addition in chemical products Triethyl arsenate 1000 ppm (0,1%) Tris(2-chloroethyl)phosphate 1000 ppm (0,1%) Zirconia Aluminosilicate, Refractory Ceramic Fibres 1000 ppm (0,1%) (Zirconia Aluminosilicate Refractory Ceramic Fibres are fibres covered by

    index number 650-017-00-8 in Annex VI, part 3, table 3.2 of Regulation

    (EC) No 1272/2008, and fulfil the two following conditions:

    a) Al2O3, SiO2 and ZrO2 are present within the following concentration

    ranges: • Al2O3: 35 36 % w/w,

    and

    • SiO2: 47.5 50 % w/w,

    and

    • ZrO2: 15 - 17 % w/w,

    b) fibres have a length weighted geometric mean diameter less two

    standard geometric errors of 6 or less micrometers (μm).

IV. General Undertaking

    In addition to the above stated, the Supplier hereby further declares that the substances specified above under Section I. and/or II. and/or III. are not and will not be used during the manufacturing of Products and/or Packaging. Complete documentation to support this

    Declaration is available for inspection or audit by Foxconn Technology CZ s.r.o. Representatives.

    The Supplier understands that no analytical test reports or other declarations reduce the Supplier’s liability for any failure to comply with the

    terms and conditions of this Declaration.

    The Supplier understands that Foxconn Technology CZ s.r.o. fully relies on this Declaration and, therefore, the Supplier undertakes to

    indemnify Foxconn Technology CZ s.r.o. against any damage suffered, and/or expenses incurred, as a result of the Supplier’s breach of this Declaration. This Declaration has been issued pursuant to and in accordance with the request of Foxconn Technology CZ s.r.o.

On behalf of the Supplier

Signature: _____________________ Date: _____________________

Name: _____________________ Position: _____________________

REQUIRED AUTHORIZED STATUTORY REPRESENTATIVE OF THE COMPANY CEO, MANAGING DIRECTOR, VICE PRESIDENT, DIRECTOR

    ETC.

    PLEASE DELETE ALL GREEN TEXTS!

    4/8 FZEMSP-024, Attachment 4a, rev.4

    Dodavatel: VYPLŇTE JMÉNO A ADRESU Foxconn Technology CZ s.r.o. Karlov 245, 284 01 Kutná Hora, Czech Republic

    Materiálové prohlášení o shodě

I. Produkt

    Dodavatel tímto prohlašuje, ţe všechny Produkty, které Dodavatel poskytne společnosti Foxconn Technology CZ s.r.o. po datu podpisu tohoto Prohlášení na základě v současné době platných či v budoucnu uzavřených smluvních ujednání (dále jen „Produkty“) budou plně v

    souladu s limity stanovenými směrnicí EU - RoHS 2002/95/ES (dále jen „Směrnice“) a nařízením REACH 1907/2006/EC (dále jen „Nařízení),

    a ţe obsah níţe uvedených látek v homogenním materiálu Produktů, s výjimkou případů stanovených Směrnicí, nepřesahuje níţe uvedené

    limity:

    Látka Hmotnostní koncentrace

    Olovo (Pb) 0,1 % (1000 ppm)

    Kadmium (Cd) 0,01 % (100 ppm) 6+Chrom forma Cr 0,1 % (1000 ppm)

    Rtuť (Hg) 0,1 % (1000 ppm)

    Polybromované bifenyly (PBB) 0,1 % (1000 ppm)

    Polybromované difenyletery (PBDE) 0,1 % (1000 ppm)

II. Obaly

    Dodavatel tímto dále prohlašuje, ţe bez ohledu na odlišná ustanovení čl.I tohoto Prohlášení, veškeré dodávané obalové prostředky nebo komponenty ve smyslu Směrnice EU 94/62/ES, resp. příslušné národní legislativy, ať jsou dodávány jako produkt nebo jsou dodány spolu s produktem (dále jen „obal“) plně odpovídají vlastnostem stanovených Směrnicí EU 94/62/ES a obsah níţe uvedených látek v obalu tedy plně splňuje následující kritéria:

     6+1) Součet obsahu Pb + Cd + Hg + Cr v homogenním materiálu obalu nesmí překročit 0,01%, 100 mg/kg, 100 ppm.

    2) Olovo, rtuť, kadmium a šestimocný chrom nesmí být v ţádném případě obsaţen v obalu jako dodatečně přidaná sloţka obalu.

    3) Metyl bromid nesmí být pouţit pro ošetřování obalu.

III. Požadavky zákazníků Foxconnu

    Veškeré poţadavky zákazníků na produkty, obaly jakoţ i veškeré materiály Produktů či Obalů jsou obsaţeny v aktuální verzi pravidel Foxconn Substance Policy na internetové adrese http://www.foxconn.cz/doc/Foxconn_substance_policy_rev5.pdf. Dodavatel se zavazuje vţdy dodrţovat poslední verzi pravidel Foxconn Substance Policy dostupných na výše uvedené internetové adrese. Pro případ rozporu mezi poţadavky Foxconn Substance Policy a poţadavky stanovenými pod body I. a II. výše, platí tato Foxconn Substance Policy. Aktuální seznam nebezpečných látek dle Foxconn Substance policy:

    Substance / Látka Details of Restriction / Upřesnění omezení Acryl amide 1000 ppm (0,1%)

    Alpha-hexabromocyclododecane 1000 ppm (0,1%)

    Aluminosilicate Refractory Ceramic Fibres 1000 ppm (0,1%)

    (Aluminosilicate Refractory Ceramic Fibres are fibres covered by index

    number 650-017-00-8 in Annex VI, part 3, table 3.2 of Regulation (EC) No

    1272/2008, and fulfil the two following conditions:

    a) Al2O3 and SiO2 are present within the following concentration ranges:

    • Al2O3: 43.5 47 % w/w,

    and SiO2: 49.5 53.5 % w/w, or

    • Al2O3: 45.5 50.5 % w/w, and SiO2: 48.5 54 % w/w,

    b) fibres have a length weighted geometric mean diameter less two

    standard geometric errors of 6 or less micrometers (μm).)

    Anthracene 1000 ppm (0,1%)

    Antimony/Antimony Compounds 1000 ppm (0,1%)

    Antimony Trioxide 1000 ppm (0,1%)

    5/8 FZEMSP-024, Attachment 4a, rev.4

    Anthracene oil, paste, fraction, anthracene-low, distn. Lights 1000 ppm (0,1%) Arsenic/Arsenic Compounds 1000 ppm (0,1%), 50 ppm (0,005%) Arsenic used in LCD or

    LCM display glass, Asbestos Prohibited

    Azo Colorants 30 ppm (0,003%) colorants for textile, plastics and leather

    articles

    Batteries Mercury 5 ppm (0,0005%), 20000 ppm (2%) Button cell bateries and

    Batteries composed of button cell bateries (products, parts

    and components must not contain mercuric oxide batteries),

    alkaline zinc and manganese batteries must not contain more

    than 1 ppm (0,0001%) Batteries Cadmium 10 ppm (0,001%), 5 ppm (0,0005%) for built-in batteries

    (such as those that are soldered or glued) Batteries Lead (nonrechargeable) 2000 ppm (0,2%), 1000 ppm (0,1%) built-in batteries (such

    as those that are soldered or glued) Batteries Nonrechargeable Alkaline and No threshold hermetically seal Carbon-Zinc Batteries

    Battery cells nickel cadmium battery 20 ppm (0,002%) Battery cells lead-acid, zinc-manganese, alkaline batteries 40 ppm (0,004%) Beryllium/Beryllium Compounds 200 ppm (0,02%) Beta-hexabromocyclododecane 1000 ppm (0,1%) Bis (2-ethylhexyl) phthalate (DEHP) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material Bismuth/Bismuth Compounds 1000 ppm (0,1%) Brominated Biphenyls (PBBs) 1000 ppm (0,1%), prohibited in textile articles intended to

    come into contact with the skin Brominated Flame Retardants (other than PBBs or PBDEs) 900 ppm (0,09%) Brominated Flame Retardants (PBBs, PBDEs, including DecaBDE) 1000 ppm (0,1%) Butyl benzyl phthalate (BBP) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material Cadmium/Cadmium compounds 50 ppm (0,005%) (paint, varnish, color pigment, dye,

    stabilizer or alloy applications), prohibited (plating or surface

    coating), 100 ppm Cd+ Cr(VI) + Hg + Pb cumulative in

    packaging materials Cobalt dichloride 1000 ppm (0,1%) Diarsenic pentaoxide 1000 ppm (0,1%) Diarsenic trioxide 1000 ppm (0,1%) Dibutylphthalate (DBP) Prohibited at levels above 1000 ppm (0,1%) in any

     homogeneous material Diisobutyl phthalate 1000 ppm (0,1%) 4,4?- Diaminodiphenylmethane (MDA) 1000 ppm (0,1%) Dimethylfumarate (DMF) 0,1ppm (0,00001%) (such as leather and desiccant packs)

    2,4-Dinitrotoluene 1000 ppm (0,1%) Di-?-oxo-di-n-butylstanniohydroxyborane (DBB dibutyltin hydrogen 1000 ppm (0,1%) in preparations borat)

    Fluorinated Greenhouse Gases Not used

    Formaldehyde 5 ppm (0,0005%) (wooden materials, furniture, detergents,

    cleaning agents, polishes), 75 ppm (0,0075%) in textile

    materials intended for skin contact by weight in any 3homogeneous textile material, 0,1 mL/m (wood, adhesive,

    plastic)

    Formaldehyde emissions 0,08 ppm (0,000008%) (Hardwood Plywood), 0,18 ppm

    (0,000018%) (Particleboard), 0,21 ppm (0,000021%)

    (Medium Density Fiberboard) Gamma-hexabromocyclododecane 1000 ppm (0,1%) Gallium (elemental) 0,1 g liquid gallium per component

    6/8 FZEMSP-024, Attachment 4a, rev.4

Halogenated aromatic substances 500 ppm (0,05%) (in capacitors and transformers for

    monohalogenated), 50 ppm (0,005%) (in material of the

    components for polyhalogenated aromatic substances) Halogenated Diphenyl Methanes Prohibited in preparations and products

     Bromine (in the form of flame retardants) and chlorine (in the

    Halogenated Flame Retardants and Polyvinyl Chloride (bromine and form of polyvinyl chloride, polyvinyl copolymers or flame

    chlorine) retardants) must not be used in parts, components, materials,

    or products in concentrations equal to or greater than 1000

    ppm (0,1%) in any homogeneous plastic material Bromine and chlorine in printed circuit boards printed circuit boards and substrate laminates must not

    contain more than 900 ppm (0,09%) by weight of bromine

    and chlorine (electrical insulator, wire, tape, tubing, cable

    enclosure, vibration dampener) Total bromine and chlorine in printed circuit boards Conbinated total concentration of bromine and chlorine in

    printed curcuit boards and substrate laminates must not

    exceed 1500 ppm (0,15%) (electrical insulator, wire, tape,

    tubing, cable enclosure, vibration dampener) Hexabromocyclododecane (HBCDD) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material Hexachloroethane Prohibited in manufacturing or processing of nonferrous

    metals

    Hexavalent Chromium/Hexavalent Chromium compounds Prohibited (metallic applications), 1000 ppm (0,1%) (non-

    metallic applications - intentional addition is prohibited in

    paints and plastic resins), 3 ppm (0,0003%) leather, 100 ppm

    Cd + Cr(VI) + Hg + Pb cumulative in packaging materials Chlorinated Solvents (Chlorinated Hydrocarbons) 1000 ppm (0,1%)

    Lead hydrogen arsenate 1000 ppm (0,1%)

    Lead/Lead compounds 1000 ppm (0,1%), 300 ppm (0,03%) (lead in external PVC

    coated cable, wire and cords), 1000 ppm (0,1%) (lead in

    internal PVC coated cable, wire and cords), 50 ppm (0,005%)

    (all plastic material, cable enclosures, paints, inks, non-

    metallic, non-ceramic coatings), 100 ppm Cd + Cr(VI) + Hg +

    Pb cumulative in packaging materials Lead chromate 1000 ppm (0,1%)

    Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 1000 ppm (0,1%)

    Lead sulfochromate yellow (C.I. Pigment Yellow 34) 1000 ppm (0,1%)

    Magnesium/Magnesium Alloys 1000 ppm (0,1%)

    Mercury/Mercury compounds 1000 ppm(0,1%), 50 ppm (switches, dyes), 100 ppm (Cd +

    Cr(VI) + Hg + Pb cumulative) in packaging materials Nickel Prohibited on surfaces that are designed to be in prolonged

    contact with skin

    Nickel on external surfaces 0,5 ?g/cm2/week released Ozone Depleting Substances Prohibited in the manufacturing process Perfluorocarbons Must not be contained in products or parts as a gas Perfluorooctane sulfonate Prohibited in manufacturing and use. Prohibited as a

    substance of in preparations at concentrations equal to or

    higher than 50 ppm (0,005%) by mass or in semifinished

    products or articles in concentrations equal to or higher than

    1000 ppm (0,1%) by mass. Phenol,2-(2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl) Not used in products Phosphorus, Red 1000 ppm (flame retardant) Pitch, coal tar, high temp. 1000 ppm (0,1%)

    Polybrominated Diphenyl ethers (PBDEs) 1000 ppm (0,1%)

    Polybrominated Biphenyl (PBB) 1000 ppm (0,1%)

    7/8 FZEMSP-024, Attachment 4a, rev.4

    Polycyclic Aromatic Hydrocarbons (PAH) Benzo?a?pyren 1 gm/kg (in external cases for portable devices, (Product category 2) desktop keyboard and mouse, portable computes, external

    power supplies for portable devices, cables for portable

    devices) sum 16 PAH (EPA) - 10 mg/kg Polycyclic Aromatic Hydrocarbons (PAH) Benzo?a?pyren 20 gm/kg (in external cases for stationary (Product category 3) devices, desktop PCs, monitors, external power supplies for

    stationary devices, power cables for stationary devices) sum

    16 PAH (EPA) - 200 mg/kg Polychlorinated Biphenyls (PCBs) Prohibited

    Polychlorinated Naphthalenes Prohibited in chemical products Polychlorinated Terphenyls Prohibited

    Polyvinyl Chloride (PVC) prohibited in the external case plastic parts (does not apply to

    the sheathing of wires and cables, plastic parts weighing less

    than 25 grams, to protective product covers, or to display

    screens for projection) Radioactive Substances Any intentional addition Selenium/Selenium Compounds 1000 ppm (0,1%) Shortchain Chlorinated Paraffins 1000 ppm (0,1%) Sodium dichromate 1000 ppm (0,1%) Tetrabromobisphenol A (TBBP-A) Prohibited at levels above 1000 ppm (0,1%) in any

    homogeneous material (exemption the use of TBBP-A as

    reactive flame retardant in epoxy and polycarbonates resins)

    5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene) 1000 ppm (0,1%) Tributyl Tin Oxide (TBTO) Prohibited in chemical products Tributyl Tin (TBT), Triphenyl Tin (TPT) Any intentional addition in chemical products Triethyl arsenate 1000 ppm (0,1%) Tris(2-chloroethyl)phosphate 1000 ppm (0,1%) Zirconia Aluminosilicate, Refractory Ceramic Fibres 1000 ppm (0,1%) (Zirconia Aluminosilicate Refractory Ceramic Fibres are fibres covered by

    index number 650-017-00-8 in Annex VI, part 3, table 3.2 of Regulation

    (EC) No 1272/2008, and fulfil the two following conditions:

    a) Al2O3, SiO2 and ZrO2 are present within the following concentration

    ranges: • Al2O3: 35 36 % w/w,

    and

    • SiO2: 47.5 50 % w/w,

    and

    • ZrO2: 15 - 17 % w/w,

    b) fibres have a length weighted geometric mean diameter less two

    standard geometric errors of 6 or less micrometers (μm).

IV. Všeobecný závazek

    V souladu s výše uvedeným, Dodavatel tímto rovněţ prohlašuje, ţe látky specifikované v části I. a II. a III. nejsou a nebudou pouţity při výrobě produktů nebo obalů. Dokumentace, dokládající pravdivost tohoto Prohlášení je k dispozici zástupcům společnosti Foxconn Technology CZ s.r.o. ke kontrole. Dodavatel souhlasí s tím, ţe jakékoliv analytické rozbory a jiná prohlášení nesniţují odpovědnost

    Dodavatele za jakékoliv nedodrţení tohoto Prohlášení.

    Dodavatel je srozuměn s tím, ţe Foxconn Technology CZ s.r.o. plně spoléhá na toto Prohlášení, a proto se Dodavatel zavazuje nahradit společnosti Foxconn Technology CZ s.r.o. jakoukoliv škodu a jakékoliv náklady vzniklé v důsledku nedodrţení tohoto Prohlášení Dodavatelem. Toto prohlášení je vydáváno na základě a v souladu s poţadavkem společnosti Foxconn Technology CZ s.r.o.

Jménem dodavatele:

Podpis: _____________________ Datum: _____________________

Jméno: _____________________ Pozice: _____________________

POŢADOVÁN JE STATUTÁRNÍ ZÁSTUPCE ORGANIZACE – JEDNATEL, PROKURA, GENERÁLNÍ ŘEDITEL, PŘEDSEDA PŘEDSTAVENTVA APOD.

VYMAŢTE PROSÍM VEŠKERÉ ZELENÉ TEXTY!

    8/8 FZEMSP-024, Attachment 4a, rev.4

Report this document

For any questions or suggestions please email
cust-service@docsford.com