By Lisa Hernandez,2014-05-10 03:34
19 views 0


    Material Safety Data Sheet

    Publish: 2008-01-22

     MSDS No:

    Product and company identification Manufacturer or supplierDongguan Pacoil Lubricant Co. Ltd

    AddressDa Sheng Industrial Est., Ma Yong, Dongguan City, Guangdong Province, China. Emergency contactMr Hu Jian 13929212710

    Telephone number0769-88823886 Telephone number0769-88823885

1. Identity information

    Product namePacoil AWH-32 High performance hydraulic oil

    There are no hazards ingredient as defined by the OSHA Hazard Communication Standard 29 CFR 1910.1200

    Chemical Concentration Components CAS. NO. TWA STEL CEILING LD50 LC50 formula %

    10 # Transformer - >80 - - - - - - oil

    2. Physical and chemical properties

    pH value: - Physical properties

     Paste Powder Solid Appearance: Yellow

    ?Liquid Gas Odor: N/A

    Boiling point >250 ? Melting point <-5 ? Vapor pressure: <0.1 mmHg Vapor density (Air=1)>1 Density (Water=1)0.86-0.92 Evaporation rate(n-butyl acetate = 1)Very little Water solubilityInsoluble

    3. Fire fighting and explosion measure Flash point>150? ? Open cup Close cup Explosive Lower explosive limit : -

    limit Higher explosive limit -

    Extinguishing mediaFoam, water spray and carbon dioxide. Fire

    fighting Special extinguishing media

4. Stability and reactivity

    Conditions to avoid: High temperature and naked fire ?Stable Stability Unstable Hazard decomposition: N/A Hazards polymerization Will not occur

    Incompatibility Avoid contact with strong oxidizing agent.


    Material Safety Data Sheet

    Publish: 2008-01-22

     MSDS No:

5. Emergency and first aid procedures

     ?Inhalation ?Skin contact ?Ingest

    Health hazard Skin will itching and red for allergy people.

    Exposures Long term contact with skin will case skin irritation.

    Eyes: Flush with large amounts of water until irritation subsides. Call a physician.

    Skin: Wash with water and soap as soon as possible. Remove contaminated clothing. First aid Inhalation: For effects produced by over-exposure, move to fresh air. Call a physician when measures needed.

    Ingestion: Drink large amount of water and have rest. Call a physician when needed.

6. Exposure control

    Individual protection

    Inhalation No need when ventilation system is good, if not, use respiratory mask.

    Eyes No need for normal operation. Can use eye goggles.

    Skin No need for normal operation.

    Hand Industrial gloves.


    Ventilation Should have good ventilation equipment.

    Transportations: Do not break the container. Handling Storage: Good ventilation, dry and cool. Keep away form heat source or naked flame. precaution Use: Avoid smoke or source of ignition.

    Personal Avoid direct contact with skin. hygiene

7. Accidental release measures

    Recover free product. Add sand, earth or other suitable absorbent to spill area. Minimize breathing

    vapors. Minimize skin contact. Open all windows and doors. Keep product out of sewers and Spills watercourses by impounding. Advise authorities if product has entered or may enter sewers,

    watercourses, or extensive land areas. Assure conformity with applicable governmental regulations.

    "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize cut, Empty weld, braze, solder, drill, grind or expose such containers to heat, flame, sparks, static electricity or container other sources of ignition; they may explode and cause injury or death. Empty drums should be warning completely drained, properly bunged and promptly returned to a drum reconditioner.

8. Transportation information


    Hazard Health: 1 UN. NO. 1267 Hazard labels - identification Flammability: 1

    Reactivity: 0

    The product is not classified as hazardous goods for land, sea and air transport according to the respective regulations


Report this document

For any questions or suggestions please email