DOC

Multibus Axis Currents top 25

By Marvin Pierce,2014-02-26 23:23
27 views 0
AXIS CURRENT MAX 2, 3, 32 With FANUC & YASKAWA Drives Most BMC machines have tapered gibs with screws at both ends of the gib, one to adjust the gib pressure and one to lock the gib. Over tightening of these screws can damage the gib. The adjusting screws are on the top for the Z axis, the left hand end of the table for the X axis and the front of the..
null
null

Report this document

For any questions or suggestions please email
cust-service@docsford.com