DOC

T-Groove Plate Installation

By Katherine Taylor,2014-04-28 22:45
10 views 0
T-Groove Plate Installation The T-Groove plates will be mounted on a series of Supawood boards cut as described below: 3 x 16mm Supawood board cut to the inside dimension of the machine frame. It should be able to slide in easily. Do not force the plates into the frame. 1 x 16 mm Supawood board cut to absolute cutting area size less 5mm (ie. 1000 x 600 = 995mm x 5..
null
null
null

Report this document

For any questions or suggestions please email
cust-service@docsford.com