DOC

Snubber Networks

By Beverly Harper,2014-10-19 00:34
11 views 0
Snubber Networks The function of the snubber network is to limit the rate of change of the voltage across the motor (out- put terminals of the L6203) when one of the DMOS devices is turned off. Using the RC snubbing circuit shown in figure 1, the rate of change of the voltage on the output is dominated by the capacitor while the resistor is used primarily to limit the peak c..
null
null
null
null

Report this document

For any questions or suggestions please email
cust-service@docsford.com